Special Airworthiness Requirements Sample Clauses

Special Airworthiness Requirements. The Customer is responsible for ensuring that the Helicopter/Custom Helicopter configuration meets all the operational requirements of the country of destination/registration/operation for the Customer’s intended usage. In the event Customer wishes to have changes made in the Helicopter/Custom Helicopter(s) to meet specific airworthiness requirements of the country of destination, Customer shall supply to Sikorsky, in the English language, copies of the applicable standards and a complete description of the changes desired. Sikorsky will review all requested changes and promptly submit a quotation to Customer of the effect on prices and delivery of incorporating such changes. If acceptable to Customer, this Agreement shall be amended to incorporate such changes; provided, however, in the event any changes result in variations in the specification, the specification shall be deemed revised to incorporate all such variations. Although Sikorsky may provide Customer with assistance in evaluating the specific airworthiness requirements of the country of destination and suggest changes to meet such requirements, Sikorsky assumes no responsibility for the acceptability of such changes to government authorities and assumes no obligation to meet the airworthiness requirements of any country other than those governed by the FAA or the European Aviation Safety Agency.
AutoNDA by SimpleDocs
Special Airworthiness Requirements. The Customer is responsible for ensuring that the Helicopter/Custom Helicopter configuration meets all the operational requirements of the country of destination/registration/operation for the Customer’s intended usage. If requested, Sikorsky shall make a good faith attempt to assist in the determination of this configuration. If required for import/registration requirements in the foreign country, Sikorsky shall endeavor to obtain that country’s design approval of the configuration items not already approved. In the event Customer wishes to have changes made in the Helicopter/Custom Helicopter(s) to meet specific airworthiness requirements of the country of destination, Customer shall supply to Sikorsky, in the English language, copies of the applicable standards and a complete description of the changes desired. Sikorsky will review all requested changes and promptly submit a quotation to Customer of the effect on prices and delivery of incorporating such changes. In accordance with paragraph 7.3.1 of Article V (Configuration) hereof, failure to provide Sikorsky with any of the foregoing information by the respective dates described above, or any change to such information, including changes to the configuration, not caused by or proposed by Sikorsky after such respective dates (i) may result in a delivery delay and such delay shall constitute an Excusable Delay by Sikorsky under this Agreement. Although Sikorsky may provide Customer with assistance in evaluating the specific airworthiness requirements of the country of destination and suggest changes to meet such requirements, Sikorsky assumes no responsibility for the acceptability of such changes to government authorities and assumes no obligation to meet the airworthiness requirements of any country.
Special Airworthiness Requirements. In the event Customer wishes to have changes made in the Helicopter/Offshore Oil Helicopter(s) to meet specific airworthiness requirements of the country of destination, Customer shall supply to Sikorsky, in the English language, copies of the applicable standards and a complete description of the changes desired. Sikorsky will review all requested changes and promptly submit a quotation to Customer of the effect on prices and delivery of incorporating such changes. If acceptable to Customer, this Agreement shall be amended to incorporate such changes; provided, however, in the event any changes result in variations in the specification, the specification shall be deemed revised to incorporate all such variations. Although Sikorsky may provide Customer with assistance in evaluating the specific airworthiness requirements of the country of destination and suggest changes to meet such requirements, Sikorsky assumes no responsibility for the acceptability of such changes to government authorities and assumes no obligation to meet the airworthiness requirements of any country.

Related to Special Airworthiness Requirements

  • Access Requirements You will be responsible for providing the System to enable you to use an Electronic Service.

  • Policy Requirements All of the policies of insurance referred to in this Article XIII shall be written in form reasonably satisfactory to Landlord and any Facility Mortgagee and issued by insurance companies with a minimum policyholder rating of “A-” and a financial rating of “VII” in the most recent version of Best’s Key Rating Guide, or a minimum rating of “BBB” from Standard & Poor’s or equivalent. If Tenant obtains and maintains the general liability insurance described in Section 13.1(e) above on a “claims made” basis, Tenant shall provide continuous liability coverage for claims arising during the Term. In the event such “claims made” basis policy is canceled or not renewed for any reason whatsoever (or converted to an “occurrence” basis policy), Tenant shall either obtain (a) “tail” insurance coverage converting the policies to “occurrence” basis policies providing coverage for a period of at least three (3) years beyond the expiration of the Term, or (b) an extended reporting period of at least three (3) years beyond the expiration of the Term. Tenant shall pay all of the premiums therefor, and deliver certificates thereof to Landlord prior to their effective date (and with respect to any renewal policy, prior to the expiration of the existing policy), and in the event of the failure of Tenant either to effect such insurance in the names herein called for or to pay the premiums therefor, or to deliver such certificates thereof to Landlord, at the times required, Landlord shall be entitled, but shall have no obligation, to effect such insurance and pay the premiums therefor, in which event the cost thereof, together with interest thereon at the Overdue Rate, shall be repayable to Landlord upon demand therefor. Tenant shall obtain, to the extent available on commercially reasonable terms, the agreement of each insurer, by endorsement on the policy or policies issued by it, or by independent instrument furnished to Landlord, that it will give to Landlord thirty (30) days’ (or ten (10) days’ in the case of non-payment of premium) written notice before the policy or policies in question shall be altered, allowed to expire or cancelled. Notwithstanding any provision of this Article XIII to the contrary, Landlord acknowledges and agrees that the coverage required to be maintained by Tenant may be provided under one or more policies with various deductibles or self-insurance retentions by Tenant or its Affiliates, subject to Landlord’s approval not to be unreasonably withheld. Upon written request by Xxxxxxxx, Tenant shall provide Landlord copies of the property insurance policies when issued by the insurers providing such coverage.

  • Customer Requirements Customer will be required to maintain complex passwords for their User accounts where applicable. For any such passwords LightEdge will provide a secure URL that any User can access to change passwords. All User passwords are set to a ninety (90) day password expiration schedule by default. LightEdge is not responsible for unexpected use of Services whether by ex-employees, compromised User passwords or any other misuse of Customer accounts. Customer shall be responsible for all costs incurred by such unexpected use of Service. Customer shall be fully responsible for providing to LightEdge at Customer’s own expense and in a timely manner the following: - All security for its Services and systems used or accessible in connection with Service; - Cooperative testing of all Customer-provided hardware, software, and Services for compatibility with Service; - Designating an Authorized Contact(s) to be the point of contact to interface with LightEdge Technical Support; - All cabling necessary to support Service; and - Physical and remote management access to any and all Servers onto which Service is installed.

  • Safety Requirements The Contractor shall comply with all Federal, State, and local safety laws and regulations applicable to the Work performed under this Agreement.

  • Support Requirements If there is a dispute between the awarded vendor and TIPS Member, TIPS or its representatives may assist, at TIPS sole discretion, in conflict resolution or third party (mandatory mediation), if requested by either party. TIPS, or its representatives, reserves the right to inspect any project and audit the awarded vendors TIPS project files, documentation and correspondence. TIPS Members stand in the place of TIPS as related to this agreement and have the same access to the proposal information and all related documents. TIPS Members have all the same rights under the awarded Agreement as TIPS.

  • E-Verify Requirements To the extent applicable under ARIZ. REV. STAT. § 41- 4401, the Contractor and its subcontractors warrant compliance with all federal immigration laws and regulations that relate to their employees and their compliance with the E-verify requirements under ARIZ. REV. STAT. § 23-214(A). Contractor’s or its subcontractor’s failure to comply with such warranty shall be deemed a material breach of this Agreement and may result in the termination of this Agreement by the City.

  • Basic Requirements To be eligible for PayPal’s Seller Protection program, all of the following basic requirements must be met, as well as any applicable additional requirements: • The primary address for your PayPal account must be in the United States. • The item must be a physical, tangible good that can be shipped, except for items subject to the Intangible Goods Additional Requirements. Transactions involving items that you deliver in person in connection with payment made in your physical store, may also be eligible for PayPal’s Seller Protection program so long as the buyer paid for the transaction in person by using a PayPal goods and services QR code. • You must ship the item to the shipping address on the Transaction Details page in your PayPal account for the transaction. If you originally ship the item to the recipient’s shipping address on the Transaction Details page but the item is later redirected to a different address, you will not be eligible for PayPal’s Seller Protection program. We therefore recommend not using a shipping service that is arranged by the buyer, so that you will be able to provide valid proof of shipping and delivery. • The shipping requirement does not apply to eligible transactions involving items that you deliver in person; provided, however, that you agree to provide us with alternative evidence of delivery or such additional documentation or information relating to the transaction that we may request. • You must respond to PayPal’s requests for documentation and other information in a timely manner as requested in our email correspondence with you or in our correspondence with you through the Resolution Center. If you do not respond to PayPal’s request for documentation and other information in the time requested, you may not be eligible for PayPal’s Seller Protection program. • If the sale involves pre-ordered or made-to-order goods, you must ship within the timeframe you specified in the listing. Otherwise, it is recommended that you ship all items within 7 days after receipt of payment. • You provide us with valid proof of shipment or delivery. • The payment must be marked “eligible” or “partially eligible” in the case of Unauthorized Transaction claims, or “eligible” in the case of Item Not Received claims, for PayPal’s Seller Protection program on the Transaction Details page. • In the case of an Unauthorized Transaction claim, you must provide valid proof of shipment or proof of delivery that demonstrates that the item was shipped or provided to the buyer no later than two days after PayPal notified you of the dispute or reversal. For example, if PayPal notifies you of an Unauthorized Transaction claim on September 1, the valid proof of shipment must indicate that the item was shipped to the buyer no later than September 3 to be eligible for PayPal’s Seller Protection program. PayPal determines, in its sole discretion, whether your claim is eligible for PayPal’s Seller Protection program. PayPal will make a decision, in its sole discretion, based on the eligibility requirements, any information or documentation provided during the resolution process, or any other information PayPal deems relevant and appropriate under the circumstances. To be eligible for PayPal’s Seller Protection program for a buyer’s Item Not Received claim, you must meet both the basic requirements and the additional requirements listed below: • Where a buyer files a chargeback with the issuer for a card-funded transaction, the payment must be marked “eligible” for PayPal’s Seller Protection on the Transaction Details page. • You must provide proof of delivery as described below.

  • Compliance with Regulatory Requirements Upon demand by Lender, Borrower shall reimburse Lender for Lender’s additional costs and/or reductions in the amount of principal or interest received or receivable by Lender if at any time after the date of this Agreement any law, treaty or regulation or any change in any law, treaty or regulation or the interpretation thereof by any Governmental Authority charged with the administration thereof or any other authority having jurisdiction over Lender or the Loans, whether or not having the force of law, shall impose, modify or deem applicable any reserve and/or special deposit requirement against or in respect of assets held by or deposits in or for the account of the Loans by Lender or impose on Lender any other condition with respect to this Agreement or the Loans, the result of which is to either increase the cost to Lender of making or maintaining the Loans or to reduce the amount of principal or interest received or receivable by Lender with respect to such Loans. Said additional costs and/or reductions will be those which directly result from the imposition of such requirement or condition on the making or maintaining of such Loans.

  • Federal Medicaid System Security Requirements Compliance Party shall provide a security plan, risk assessment, and security controls review document within three months of the start date of this Agreement (and update it annually thereafter) in order to support audit compliance with 45 CFR 95.621 subpart F, ADP System Security Requirements and Review Process.

  • Vehicle Requirements The following shall be considered minimum Vehicle requirements. The Authorized User shall include supplemental required specifications for Vehicles specified in a Mini-Bid. Unless otherwise indicated, all items specified which are listed on the OEM Pricelist as standard or optional equipment shall be factory installed and operative. Vehicles delivered to an Authorized User in a condition considered to be below retail customer acceptance levels will not be accepted. Items which determine this acceptance level shall include, but not be limited to, the general appearance of the interior and exterior of the vehicle for completeness and quality of workmanship, lubrication and fluid levels, with any leaks corrected, mechanical operation of the vehicle and all electrical components operational. Product specified to be furnished and installed which is not available through the OEM shall conform to the standards known to that particular industry, both product and installation.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!