Splitter Sample Clauses

Splitter. CenturyTel shall own and provide the splitter for RACC’s use. Therefore, the splitter shall be located in an area in the serving wire center to which RACC does not have access (e.g., on or as close to the main distribution frame as practical). Said splitter shall be installed in any of the following locations within the central office, at CenturyTel’s discretion--the main distribution frame, in a relay rack mounted arrangement or intermediate frame arrangement. Pursuant to this arrangement, RACC shall obtain the splitter functionality on an individual “port-at-a-time” basis. CenturyTel shall perform all maintenance and repair work (as detailed further below in Section 6.7.11). RACC shall receive its DSL traffic via a tie cable obtained from CenturyTel, running from the main distribution frame to the splitter and then from the splitter to RACC’s collocation arrangement. CenturyTel shall provide to RACC loop and splitter functionality that is compatible with any transmission technology that RACC seeks to deploy using the high frequency portion of the loop, provided that such transmission technology is presumed to be deployable pursuant to applicable FCC rules and orders.
AutoNDA by SimpleDocs
Splitter. Tel USA shall own and provide the splitter for Lakeland’s use. Therefore, the splitter shall be located in an area in the serving wire center to which Lakeland does not have access (e.g., on or as close to the main distribution frame as practical). Said splitter shall be installed in any of the following locations within the central office, at Tel USA’s discretion--the main distribution frame, in a relay rack mounted arrangement or intermediate frame arrangement. Pursuant to this arrangement, Lakeland shall obtain the splitter functionality on an individual “port-at-a-time” basis. Tel USA shall perform all maintenance and repair work (as detailed further below in Section 2.11). Lakeland shall receive its DSL traffic via a tie cable obtained from Tel USA, running from the main distribution frame to the splitter and then from the splitter to Lakeland’s collocation arrangement. Tel USA shall provide to Lakeland loop and splitter functionality that is compatible with any transmission technology that Lakeland seeks to deploy using the high frequency portion of the loop, provided that such transmission technology is presumed to be deployable pursuant to applicable FCC rules and orders.

Related to Splitter

  • Litter In accordance with the Virginia Anti-Litter Law, receptacles sufficient to contain workmen's litter and construction wastes capable of being spread by wind or water shall be located on the construction site. The number and size of receptacles required shall be determined by the Contractor.

  • Recycling If this Agreement provides for the purchase or use of goods specified in PCC 12207 (for example, certain paper products, office supplies, mulch, glass products, lubricating oils, plastic products, paint, antifreeze, tires and tire-derived products, and metal products), this section is applicable with respect to those goods. Without limiting the foregoing, if this Agreement includes (i) document printing, (ii) parts cleaning, or (iii) janitorial and building maintenance services, this section is applicable. Contractor shall use recycled products in the performance of this Agreement to the maximum extent doing so is economically feasible. Upon request, Contractor shall certify in writing under penalty of perjury, the minimum, if not exact, percentage of post consumer material as defined in the PCC 12200, in such goods regardless of whether the goods meet the requirements of PCC 12209. With respect to printer or duplication cartridges that comply with the requirements of PCC 12156(e), the certification required by this subdivision shall specify that the cartridges so comply.

  • Platby In consideration for the services rendered by the Institute, in the Study, the Sponsor agrees to pay to the Institute according to the Budget, attached as Exhibit B hereto (the “Fee”). Jako protiplnění za služby poskytnuté Zdravotnickým zařízením při provádění Studie se Zadavatel zavazuje hradit Zdravotnickému zařízení platby podle Rozpočtu, který je ke Smlouvě přiložen jako Příloha B („Poplatek“). The Fee shall be payable for each eligible Subject properly enrolled according to the Protocol upon proper completion and delivery to the Sponsor of the Case Report Forms (the “CRF”) for each Subject. The Fees, plus VAT calculated in the legal amount, shall be the full remuneration and payment by Sponsor for all costs incurred in the course of the clinical Study. Any and all taxes or other registration charges shall be borne by the Institute. Poplatek bude splatný za každého způsobilého Účastníka, který je zařazen do Studie podle Protokolu, po řádném vyplnění a doručení Zadavateli záznamových formulářů („CRF“) za každého Účastníka. Poplatky navýšené o DPH vypočítanou v zákonné výši budou úplnou odměnou a platbou Zadavatele za všechny náklady, které vzniknou v průběhu klinické Studie. Náklady na veškeré daně nebo jiné registrační poplatky ponese Zdravotnické zařízení. The Institute will recruit a maximum of 300 Subjects into the Study. The Sponsor will not pay Fees, reimburse any expense, charge, cost, nor bear any liability to the Institute, nor to any other person or entity, in respect of any Subject in excess of the maximum number of Subjects specified in the previous sentence. Zdravotnické zařízení do Studie získá maximálně 300 Účastníků. Zadavatel nezaplatí Poplatky, neuhradí žádný výdaj, poplatek ani náklad ani neponese žádnou odpovědnost vůči Zdravotnickému zařízení ani vůči jakékoliv jiné osobě nebo subjektu, pokud jde o jakéhokoliv Účastníka nad rámec maximálního počtu Účastníků specifikovaného v předchozí větě. Fees due will be transferred by the Sponsor upon provision of a respective invoice to the following account of the Institute: Splatné Poplatky Zadavatel převede po poskytnutí příslušné faktury na následující účet Zdravotnického zařízení:

  • GRILLS Individually owned grills, smokers, hibachis, and other outside cooking appliances may not be used or stored on the premises.

  • Brakes Master cylinder, wheel cylinders, hydraulic lines and fittings, power booster and brake callipers. Excludes linings, pads, drums and discs.

  • Pruning Nondestructive thinning of lateral branches to enhance views or trimming, shaping, thinning or pruning of a tree necessary to its health and growth is allowed, consistent with the following standards:

  • Blasting Blasting shall be permitted only for road construction purposes unless advance permission is obtained from Forest Service. Whenever the Industrial Fire Precaution Level is II or greater, a fire security person equipped with a long handled round point No. 0 or larger shovel and a 5 gallon backpack pump can filled with water, will stay at location of blast for 1 hour after blasting is done. Blasting may be suspended by Forest Service, in areas of high rate of spread and resistance to control. Fuses shall not be used for blasting. Explosive cords shall not be used without permission of Forest Service, which may specify conditions under which such explosives may be used and precautions to be taken.

  • Playground ~ The playground is primarily for the use of children under the age of twelve (12). Any child caught throwing rocks, vandalizing, or hitting or teasing other children will be asked to leave the playground. An adult or appropriate baby-sitter must accompany all children under the age of six (6) years old. Garbage ~ The storage, collection and disposal of refuse and garbage in the recreational camping areas shall be conducted as to create no health hazards, rodent harborage, insect breeding areas, accident or fire hazards, or air pollution. Bag all food garbage in plastic and tie shut before placing in the dumpster, to prevent odor and rodents which are drawn to the garbage area, such as skunks, raccoons etc. Dumpster is for normal daily household garbage, no large boxes, building supplies, carpets etc. Camper is to dispose of this type of garbage elsewhere. Garbage may be placed in dumpsters only. If a dumpster is full, do not place garbage on or around the dumpster, find an empty dumpster to place your garbage into. Bags of garbage may not be set outside your camper for any reason. Disposal or deposit of hazardous or toxic waste is prohibited. No gas, oil, batteries, or car fluids may be deposited into the dumpsters or around the dumpsters. Hazardous materials will not be disposed of by the garbage service. Disposal or deposit of furniture, barbeque grills, washer, dryers, and other large household items are NOT permitted on, in or around the dumpsters. Holding Tanks ~ There is no size restriction on holding tanks, however, they must be opaque XX xxxx/black water approved tanks. The on-site dump station may be used to empty tanks that hold 50 gallons or less. For tanks over 50 gallons Camper must contract with a pumping service to pump and remove tank contents from campground. No dumping of xxxx water onto the ground. Docks ~ Campground does NOT have a lifeguard on duty. The docks are privately owned. In order to be on someone's dock you must receive permission from the dock owner. An adult must accompany all children on the docks after dark. Life jackets are required for young children fishing off docks. Running, diving, and/or horseplay are not allowed on the docks. All debris and toys must be removed from the docks, beach and marina area. Inappropriate behavior, intoxication or shouting on docks is not allowed. Glass is not allowed on the beach area. Jet skies, wave runners, etc. are not permitted in the marina area. Tires cannot be left in the marina area under boats or tied onto docks. Fish House ~ Clean up fish cleaning facility when done with your fish cleaning and bag all fish remains. Fish cleaning house must be kept clean and all fish waste must be put into plastic bags and deposited into dumpster and cover on dumpster closed. No dumping of fish wastes into marina or dog waste stations! Swimming Pool ~ Campers are required to abide by all rules posted in and around the pool area.

  • Smoke This peril means sudden and accidental damage from smoke, including the emission or puffback of smoke, soot, fumes or vapors from a boiler, furnace or related equipment. This peril does not include loss caused by smoke from agricultural smudging or industrial operations.

  • Millwright Xxxxx be to assist and work under the direction and instructions I or A. He will work alone at times performing assignments in keeping with his training. During the course of his year, training must become proficient in good practices in the areas of fitting, aligning, lubricating and the operation of all shop tools and machines. In addition to the foregoing, he will be exposed to and the process of learning techniques required in trouble shooting key production machinery, pipe fitting, basic welding and machining but not be expected to display a high degree of proficiency in these areas at this point. Millwright Must be capable of performing the tasks of fittings, aligning, lubricating an able to operate all shop tools and machines. Must under direction become proficient in basic welding and pipe fitting as well as dismantling and reassembly of plant equipment. Under direction,will continueto develop skills in trouble shooting all plant equipment and improve his skills at machining part and be exposed to basic principles of hydraulics and pneumatic. He may work alone frequently, but occasionally will require direction and instructions form Millwright I or A. Millwright 11: be capable, without direction of fitting, aligning and lubrication and taking apart and reassembling plant equipment. In addition, is expected to be able to weld, operate shop tools and do pipe fitting as required. Must under direction, become proficient at effective methods of trouble shooting and repairing hydraulic, pneumatic and mechanical faults in plant machinery. I: Must be capable without direction of performing all practices under Xxxxxxxxxx Must under directionbecomeproficient at reading and understanding blueprints, all phases of installing new equipment, laying out hydraulic and mechanical drives and meet speed and power requirements correctly. Xxxxxxxxxx "A": Must he capable without direction, of performing all under Xxxxxxxxxx X, and Must take full responsibility for work done by himself or his assistant. Must he in possession of a Millwright Certificate or a Machinist Certificate or Welder Certificate. Millwrightspresently employed in this classification will not be required to have a Certificate.

Time is Money Join Law Insider Premium to draft better contracts faster.