STEEL WORK Sample Clauses

STEEL WORK. 5.1 The rate of T- angle iron frame shall include the following. (a) X.X. xxxx/tie of 10mm dia bar welded to T-iron frames to keep the frames vertical in correct position . The sill / tie shall be embedded in floor concrete. No tie is necessary for window frames. (b) Each T – iron frame for doors shall have 4 Nos M.S. lugs 15x3mm, 10 cms long welded to each vertical member of the frame. (c) M.S. flat 6 x 25mm, 100mm long having threaded holes (No. of flats shall correspond to the no. of butt hinges to be fixed to door / window shutters) shall be welded at appropriate places at the back of the T-iron frames for fixing the required butt hinges to the frame with machine screws. 5.2 All welded structural steel work shall be tested for quality of weld as laid down in IS 822- 1970 before actual erection if required.
Sample 1Sample 2
AutoNDA by SimpleDocs
STEEL WORK. 6.1 The work shall be carried out as per CPWD Specifications-2019 with amendments issued on date.
Sample 1Sample 2
STEEL WORK. M.S. Grill will be provided at the windows, verandah/balcony railings. All the steel works will be provided property with 2 coats synthetic enamel paint. No courving (at verandah/balcony above railing level) will be done even in future by the flat Owners also.
Sample 1
STEEL WORK. The steel structure to be used for pipe racks, the combustion turbine enclosures and warehouse/maintenance area shall be designed, fabricated, and erected in accordance with American Institute of Steel Construction specification. Bolts and nuts for galvanized structural steel shall be hot dipped galvanized or zinc electroplated. All hoist and monorail support beams shall be clearly marked with their rated capacity.
Sample 1
STEEL WORK. A. Contractor’s steel scope of Work shall include, but not limited to: 1. Inspection and dimensional checks on all foundations; 2. All structural steel prefabrication, assembly and erection, including primary steel members, secondary steel, shelters, platforms for equipment, flare stacks and related access platforms, pipe racks and supports, ladders, stairs, walkways and handrails; and 3. All other associated structural works.
Sample 1
STEEL WORK. Allow a sum for bullustrade and handrails to staircases and Platform furniture and dustbins, include 7.5% handling and managent fee, all works to remeasured
Sample 1

Related to STEEL WORK

  • Extra Work At any time during the Term of this Agreement, City may request that Consultant perform Extra Work. As used herein, “Extra Work” means any work which is determined by City to be necessary for the proper completion of the Project, but which the Parties did not reasonably anticipate would be necessary at the execution of this Agreement. Consultant shall not perform, nor be compensated for, Extra Work without written authorization from City’s Representative.

  • Construction Work The regulation at 41 C.F.R. § 60-1.3 defines “construction work” as the construction, rehabilitation, alteration, conversion, extension, demolition or repair of buildings, highways, or other changes or improvements to real property, including facilities providing utility services. The term also includes the supervision, inspection, and other onsite functions incidental to the actual construction.

  • Construction Phase Services 3.1.1 – Basic Construction Services

  • Construction Services 3.1.1 Basic Construction Services. 3.1.2 Meetings and Schedule Updates.

  • Preconstruction Services During the Design & Preconstruction Phase, the Design-Builder shall provide such design and preconstruction services as are necessary to properly advance the Project. Without limiting the generality of the foregoing, during the Preconstruction Phase, the Design-Builder shall: (i) work with its Architect and any design consultants to advance the design for the Project in consultation with Client Agency, the Department and its Program Manager; (ii) obtain bids from trade subcontractors to perform the work described in the Design Development Documents and provide bid tabulations to the Department; (iii) engage in any value engineering and scoping exercises necessary to return the cost of the work to the Project Budget; (iv) engage in preconstruction activities, including identifying any long-lead items; (v) develop a GMP proposal for the Project; and (vi) enter into a GMP for the Project. Throughout the Design & Preconstruction Phase, the Design-Builder shall schedule and attend regular meetings with the Department, the Program Manager and the Architect. A list of preconstruction deliverables is set forth in Exhibit C.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!