Sub-Factor C – Manufacturing Sample Clauses

Sub-Factor C – Manufacturing i. Element C1 - Manufacturing Capacity. The Government shall evaluate the Offeror’s manufacturing capability in terms of being able to meet the (a) initial production delivery order of 200 units and (b) the maximum peacetime production quantity. If the required capacity does not currently exist, the Government will evaluate the plan for installing the required capacity already in place or proposed for the CWB. Capacity is already in place to meet projected delivery schedule. Outstanding Good Manufacturing capacity is in place equal to 50% of what is required and a realistic plan has been proposed to expand capacity without significant capital investment. Acceptable Limited manufacturing capacity exists but a realistic plan has been proposed for installing the required manufacturing capacity with significant capital investment required. Marginal Limited manufacturing capacity exists and the plan proposed for installing the required capacity lacks detail Unacceptable No manufacturing capacity exists and the plan for installing such capacity is unrealistic based on the assumptions presented.
AutoNDA by SimpleDocs

Related to Sub-Factor C – Manufacturing

  • Manufacturing (a) The Supplier shall without limitation be responsible, at no additional cost to the Purchaser, for: sourcing and procuring all raw materials for the Products; obtaining all necessary approvals, permits and licenses for the manufacturing of the Products; providing sufficient qualified staff and workers to perform the obligations under this Purchase Agreement; implementing and maintaining effective inventory and production control procedures with respect to the Products; and handling other matters as reasonably requested by the Purchaser from time to time. (b) The Supplier shall not change any process, material, component, packaging or manufacturing location without the Purchaser’s express prior written approval.

  • RE-WEIGHING PRODUCT Deliveries are subject to re- weighing at the point of destination by the Authorized User. If shrinkage occurs which exceeds that normally allowable in the trade, the Authorized User shall have the option to require delivery of the difference in quantity or to reduce the payment accordingly. Such option shall be exercised in writing by the Authorized User.

  • Manufacturing Rights (a) If QED fails to supply Product ordered by ViewRay in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then QED shall within fifteen (15) Business Days of said failure present ViewRay with a plan to remedy the problem and shall use Commercially Reasonable Efforts to execute such plan and remedy the problem or QED shall secure an alternative source of supply within a reasonable time at no additional cost to ViewRay. Any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If QED is unable to provide a plan to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then QED shall consult with ViewRay and the parties shall work together to remedy the problem. If QED is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to QED, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b). [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. (b) If ViewRay notifies QED pursuant to Section 3.10(a), above, that ViewRay will manufacture the Products itself or through a third party, QED shall (i) deliver to ViewRay within thirty (30) days media embodying or disclosing all Program technology and Program proprietary or intellectual property rights necessary to enable ViewRay or its designee to manufacture Products conforming with the Specifications; and (ii) provide ViewRay or its designee, upon request, with reasonable assistance in establishing a back-up manufacturing line. ViewRay shall require any third party ViewRay designates to manufacture Products pursuant to this Section 3.10, to agree in writing to observe the terms of this Agreement relating to confidentiality and the manufacture of Products. Notwithstanding any provision of this Section 3.10 to the contrary, in no case shall QED be required to pay ViewRay in respect of any Products purchased by ViewRay from a third party operating a back-up manufacturing line established pursuant to this Section 3.10 or manufactured by ViewRay or its Affiliates pursuant to this Section 3.10.

  • Combination Product The term “

  • Laboratory Testing All laboratories selected by UPS Freight for analyzing Controlled Substances Testing will be HHS certified.

  • Combination Products If a LICENSED PRODUCT is sold to any third party in combination with other products, devices, components or materials that are capable of being sold separately and are not subject to royalties hereunder (“OTHER PRODUCTS,” with the combination of products being referred to as “COMBINATION PRODUCTS” and the Other Product and Licensed Product in such Combination Product being referred to as the “COMPONENTS”), the NET SALES of such LICENSED PRODUCT included in such COMBINATION PRODUCT shall be calculated by multiplying the NET SALES of the COMBINATION PRODUCT by the fraction A/(A+B), where A is the average NET SALES price of such LICENSED PRODUCT in the relevant country, as sold separately, and B is the total average NET SALES price of all OTHER PRODUCTS in the COMBINATION PRODUCT in the relevant country, as sold separately. If, in any country, any COMPONENT is not sold separately, NET SALES for royalty determination shall be determined by the formula [C / (C+D)], where C is the aggregate average fully absorbed cost of the Licensed Product components during the prior Royalty Period and D is the aggregate average fully absorbed cost of the other essential functional components during the prior Royalty Period, with such costs being determined in accordance with generally accepted accounting principles. To the extent that any SUBLICENSE INCOME relates to a COMBINATION PRODUCT or is otherwise calculated based on the value of one or more licenses or intellectual property rights held by the COMPANY, an AFFILIATE or SUBLICENSEE, COMPANY shall determine in good faith and report to THE PARTIES the share of such payments reasonably attributable to COMPANY’s or such AFFILIATE’s sublicense of the rights granted hereunder, based upon their relative importance and proprietary protection, which portion shall be the SUBLICENSE INCOME. THE PARTIES shall have the right to dispute such sharing determination in accordance with the dispute provisions of the AGREEMENT.

  • Hepatitis B Vaccine Where the Hospital identifies high risk areas where employees are exposed to Hepatitis B, the Hospital will provide, at no cost to the employees, a Hepatitis B vaccine.

  • Salary Packaging (1) For the purposes of this Agreement, salary packaging shall mean an arrangement whereby the wage or salary benefit arising under a contract of employment is reduced, with another or other benefits to the value of the replaced salary being substituted and due to the practitioner. (2) A practitioner may, by agreement with the employer, enter into a salary packaging arrangement. (3) The employer shall not unreasonably withhold agreement to salary packaging on request from a practitioner. (4) The employer shall not require a practitioner to enter into a salary packaging arrangement, provided that this clause will not impinge on any additional employer provided benefits. (5) A salary packaging arrangement shall be formulated and operate on the basis that, on balance, there shall be no material disadvantage to the practitioner concerned, and shall be cost neutral in relation to the total employment cost to the employer. (6) A salary packaging arrangement must comply with relevant taxation laws and the employer shall not be liable for additional tax, penalties or other costs payable or which may become payable by the practitioner. (7) In the event of any increase or additional payments of tax or penalties associated with the employment of the practitioner, or the provision of employer benefits under the salary packaging agreement, such tax, penalties and any other costs shall be borne by the practitioner. (8) A practitioner may elect to cancel any salary packaging arrangement by giving a minimum of four weeks notice. (9) The employer may elect to cancel any salary packaging arrangement by giving a minimum of four weeks notice if the employer incurs a liability to pay fringe benefits tax or any other tax in respect of the non-cash benefits provided, provided that the employer cannot retrospectively cancel any salary packaging arrangement. (10) Notwithstanding subclauses (8) and (9) of this clause, the employer and the Practitioner may agree to forgo the notice period. (11) The cancellation of salary packaging will not cancel or otherwise effect the operation of this Agreement. (12) For the purposes of this provision, any penalty rate, loading or other salary related allowances which would ordinarily be calculated on the basis of the salary rates expressed in Schedule 1 Full Time Annual Base Salary Rates shall continue to be so calculated despite an election to participate in any salary packaging arrangement. (13) For the purposes of this provision, statutory 9% employer superannuation contributions shall be made on the basis of pre-packaging salary rates. To avoid doubt, employer contributions shall not be reduced as a result of a practitioner participating in salary packaging pursuant to this provision. (14) The employer may at any time vary the range of benefits provided or the conditions under which benefits are provided however the employer shall not differentiate between different class of practitioners across WA Health in terms or range of benefits or the conditions under which benefits are provided. (15) If a practitioner is found to have committed misconduct in the claiming a salary packaging benefit the employer is entitled to prospectively cease to provide some or all salary packing benefits either indefinitely or for any period determined by the employer.

  • Computer Equipment Recycling Program If this Contract is for the purchase or lease of computer equipment, then Contractor certifies that it is in compliance with Subchapter Y, Chapter 361 of the Texas Health and Safety Code related to the Computer Equipment Recycling Program and the Texas Commission on Environmental Quality rules in 30 TAC Chapter 328.

  • SHOP DRAWINGS, PRODUCT DATA AND SAMPLES 4.12.1 Shop Drawings are drawings, diagrams, schedules and other, data specially prepared for the Work by the Contractor or any Subcontractor, manufacturer, supplier or distributor to illustrate some portion of the Work. 4.12.2 Product Data are illustrations, standard schedules, performance charts, instructions, brochures, diagrams and other information furnished by the Contractor to illustrate a material, product or system for some portion of the Work. 4.12.3 Samples are physical examples which illustrate materials, equipment or workmanship and establish standards by which the Work will be judged. 4.12.4 The Contractor shall review, approve and submit, with reasonable promptness and in such sequence as to cause no delay in the Work or in the work of the State or any separate contractor, all Shop Drawings, Product Data and Samples required by the Contract Documents. 4.12.5 By approving and submitting Shop Drawings, Product Data and Samples, the Contractor represents that he / she has determined and verified all materials, field measurements, and field construction criteria related thereto, or will do so, and that he / she has checked and coordinated the information contained within such submittals with the requirements of the Work and of the Contract Documents. 4.12.6 The Contractor shall not be relieved of responsibility for any deviation from the requirements of the Contract Documents by the Architect's approval of Shop Drawings, Product Data or Samples under Subparagraph 2.2.7 of these General Conditions unless the Contractor has specifically informed the Architect and the State in writing of such deviation at the time of sub- mission and the Architect and the State has given written approval to the specific deviation. The Contractor shall not be relieved from responsibility for errors or omissions in the Shop Drawings, Product Data or Samples by the Architect's approval thereof. 4.12.7 The Contractor shall direct specific attention, in writing or on resubmitted Shop Drawings, Product Data or Samples, to revisions other than those requested by the Architect on previous submittals. 4.12.8 No portion of the Work requiring submission of a Shop Drawing, Product Data or Sample shall be commenced until the submittal has been approved by the Architect as provided in Subparagraph 2.2.7 of these General Conditions. All such portions of the Work shall be in accordance with approved submittals.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!