Supply of Nascobal Units Sample Clauses

Supply of Nascobal Units. (a) During the term of this Agreement, Schwxxx xxxees to purchase from Nastech and Nastech agrees to supply Schwxxx xxxh all of its requirements for Nascobal Units and Nascobal samples for their subsequent use, sale, lease or transfer by Schwxxx. Xn case Nastech develops Improved Nascobal Units, Nastech may, with Schwxxx'x xxxsent, to be given or withheld in Schwxxx'x xxxe discretion, supply Improved Nascobal Units instead of Nascobal Units under this Agreement. (b) Schwxxx xxxees to initiate purchases of Nascobal Units and Nascobal samples hereunder by issuing Nastech purchase orders not less than 60 days prior to the required delivery date set forth therein. Nastech agrees to accept any order issued in accordance with this Section 4.1(b) which specifies quantities reasonably consistent with those set forth in the purchase forecasts for such Quarter and to meet the delivery dates specified thereon. All purchase orders hereunder shall be on Schwxxx'x xxxndard purchase order form (a copy of which has been delivered to Nastech) and shall be directed to Nastech at the address set forth below. The terms and conditions of purchase enumerated on the reverse side of such standard purchase order form shall prevail over any inconsistent or conflicting language as may exist on invoices, confirmation or order acknowledgment forms of Nastech, provided, however, that in the event any terms (c) Schwxxx xxx increase, without payment of any penalty or premium, the quantities of Nascobal specified on any purchase order by up to thirty-five percent (35%) from the forecasts provided under Section 4.5, provided, however, that notice of such increase is received by Nastech on a supplemental purchase order not less than 45 days prior to the requested delivery date for such increased quantity of Nascobal. Subject to conformity with the manufacturing lead times for Nascobal ordered on such supplemental purchase order, Nastech agrees to accept supplemental purchase orders for increased quantities issued in accordance with this Section 4.1(c).
Sample 1
AutoNDA by SimpleDocs
Supply of Nascobal Units. Nastech shall maintain the capacity throughout the term of this Agreement to meet the requirements of Schwxxx xxx Nascobal Units hereunder.
Sample 1

Related to Supply of Nascobal Units

  • Vendor Encouraging Members to bypass TIPS agreement Encouraging entities to purchase directly from the Vendor or through another agreement, when the Member has requested using the TIPS cooperative Agreement or price, and thereby bypassing the TIPS Agreement is a violation of the terms and conditions of this Agreement and will result in removal of the Vendor from the TIPS Program.

  • Multi-year Planning Targets Schedule A may reflect an allocation for the first Funding Year of this Agreement as well as planning targets for up to two additional years, consistent with the term of this Agreement. In such an event, the HSP acknowledges that if it is provided with planning targets, these targets: a. are targets only, b. are provided solely for the purposes of planning, c. are subject to confirmation, and d. may be changed at the discretion of the Funder in consultation with the HSP. The HSP will proactively manage the risks associated with multi-year planning and the potential changes to the planning targets; and the Funder agrees that it will communicate any changes to the planning targets as soon as reasonably possible.

  • Manufacturing and Marketing Rights The Company has not granted rights to manufacture, produce, assemble, license, market, or sell its products to any other person and is not bound by any agreement that affects the Company's exclusive right to develop, manufacture, assemble, distribute, market, or sell its products.

  • Supply of Services 7.1 Supplier shall provide the Services to Purchaser in accordance with the Order in all material respects using reasonable care and skill. 7.2 Supplier shall use reasonable endeavours to meet any performance dates for the Services specified in the Order but any dates shall be estimates only and time shall not be of the essence for the performance of the Services. 7.3 Supplier shall have the right to make any changes to the Services which are necessary to comply with any applicable law or safety requirements or which do not materially affect the nature or quality of the Services. 7.4 Purchaser shall: (a) ensure that the terms of Order are complete and (if submitted by Purchaser) the service specification are complete and accurate; (b) co-operate with Supplier in all matters relating to the Services; (c) provide Supplier, its employees, agents, consultants and subcontractors with access to Purchaser’s premises, machinery and other facilities as reasonably required by Supplier to provide the Services; and (d) provide Supplier with such information and materials as Supplier may reasonably require to supply the Services, and ensure that such information is accurate in all material respects. 7.5 If Supplier’s performance of any of its obligations in respect of the Services is prevented or delayed by an any act or omission by Purchaser or failure by Purchaser to performs its obligations (“Purchaser Default”) Supplier shall without limiting its other rights or remedies have the right to suspend performance of the Services until Purchaser remedied Purchaser Default and relieves Supplier from its obligations to the extent the Customer Default prevents or delays Supplier’s performance. Purchaser shall indemnify Supplier against all liabilities costs, losses and expenses which Supplier may incur by reason of Purchaser Default. 7.6 Where the Services consist of any experimental or developmental work, the results supplied or recommendations made under the Services are given in good faith within the limitations of the data available, but no warranty, expressed or implied, is given as to the ability of Supplier to achieve a specific outcome, nor the accuracy of results obtained. 7.7 Any claims by Purchaser which is based on defect in the Services shall be notified to Supplier within twenty-one (21) days of the services being performed and promptly after discovery of defect or failure. The sole and exclusive remedy of Purchaser for such defect hereunder shall be the re-performance or re- fund, at Supplier’s option, of any defective or non-conforming Services.

  • Condominiums/Planned Unit Developments If the Mortgaged Property is a condominium unit or a planned unit development (other than a de minimis planned unit development) such condominium or planned unit development project such Mortgage Loan was originated in accordance with, and the Mortgaged Property meets the guidelines set forth in the Originator's Underwriting Guidelines;

  • Manufacturing Rights (a) If QED fails to supply Product ordered by ViewRay in accordance with the terms of this Agreement regarding the quantity or quality of Products supplied to ViewRay, then QED shall within fifteen (15) Business Days of said failure present ViewRay with a plan to remedy the problem and shall use Commercially Reasonable Efforts to execute such plan and remedy the problem or QED shall secure an alternative source of supply within a reasonable time at no additional cost to ViewRay. Any such alternative source of supply shall be on terms substantially identical with the terms of this Agreement. If QED is unable to provide a plan to remedy the problem or secure an alternative source of supply within [***] after its initial failure to supply, then QED shall consult with ViewRay and the parties shall work together to remedy the problem. If QED is unable to remedy the supply problem after [***] (or longer as agreed in writing by the parties), commencing with the date upon which such failure to supply began, then ViewRay may at its option, and upon notice to QED, manufacture the Products itself or through a third party in accordance with the provisions of Section 3.10(b). [***] Certain information in this document has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. (b) If ViewRay notifies QED pursuant to Section 3.10(a), above, that ViewRay will manufacture the Products itself or through a third party, QED shall (i) deliver to ViewRay within thirty (30) days media embodying or disclosing all Program technology and Program proprietary or intellectual property rights necessary to enable ViewRay or its designee to manufacture Products conforming with the Specifications; and (ii) provide ViewRay or its designee, upon request, with reasonable assistance in establishing a back-up manufacturing line. ViewRay shall require any third party ViewRay designates to manufacture Products pursuant to this Section 3.10, to agree in writing to observe the terms of this Agreement relating to confidentiality and the manufacture of Products. Notwithstanding any provision of this Section 3.10 to the contrary, in no case shall QED be required to pay ViewRay in respect of any Products purchased by ViewRay from a third party operating a back-up manufacturing line established pursuant to this Section 3.10 or manufactured by ViewRay or its Affiliates pursuant to this Section 3.10.

  • Registration and Transfer of Limited Partner Interests (a) The General Partner shall maintain, or cause to be maintained by the Transfer Agent in whole or in part, the Partnership Register on behalf of the Partnership. (b) The General Partner shall not recognize any transfer of Limited Partner Interests evidenced by Certificates until the Certificates evidencing such Limited Partner Interests are duly endorsed and surrendered for registration of transfer. No charge shall be imposed by the General Partner for such transfer; provided, however, that as a condition to the issuance of any new Certificate under this Section 4.5, the General Partner may require the payment of a sum sufficient to cover any tax or other governmental charge that may be imposed with respect thereto. Upon surrender of a Certificate for registration of transfer of any Limited Partner Interests evidenced by a Certificate, and subject to the provisions of this Section 4.5(b), the appropriate officers of the General Partner on behalf of the Partnership shall execute and deliver, and in the case of Certificates evidencing Limited Partner Interests for which a Transfer Agent has been appointed, the Transfer Agent shall countersign and deliver, in the name of the holder or the designated transferee or transferees, as required pursuant to the holder’s instructions, one or more new Certificates evidencing the same aggregate number and type of Limited Partner Interests as was evidenced by the Certificate so surrendered. Upon the proper surrender of a Certificate, such transfer shall be recorded in the Partnership Register. (c) Upon the receipt of proper transfer instructions from the Record Holder of uncertificated Partnership Interests, such transfer shall be recorded in the Partnership Register. (d) Except as provided in Section 4.9, by acceptance of any Limited Partner Interests pursuant to a transfer in accordance with this Article IV, each transferee of a Limited Partner Interest (including any nominee, or agent or representative acquiring such Limited Partner Interests for the account of another Person or Group) (i) shall be admitted to the Partnership as a Limited Partner with respect to the Limited Partner Interests so transferred to such Person when any such transfer or admission is reflected in the Partnership Register and such Person becomes the Record Holder of the Limited Partner Interests so transferred, (ii) shall become bound, and shall be deemed to have agreed to be bound, by the terms of this Agreement, (iii) represents that the transferee has the capacity, power and authority to enter into this Agreement, (iv) makes the consents, acknowledgements and waivers contained in this Agreement, all with or without execution of this Agreement by such Person and (v) shall be deemed to certify that the transferee is not an Ineligible Holder. The transfer of any Limited Partner Interests and the admission of any new Limited Partner shall not constitute an amendment to this Agreement. (e) Subject to (i) the foregoing provisions of this Section 4.5, (ii) Section 4.3, (iii) Section 4.8, (iv) with respect to any class or series of Limited Partner Interests, the provisions of any statement of designations or an amendment to this Agreement establishing such class or series, (v) any contractual provisions binding on any Limited Partner and (vi) provisions of applicable law including the Securities Act, Limited Partner Interests shall be freely transferable. (f) The General Partner and its Affiliates shall have the right at any time to transfer their Common Units to one or more Persons.

  • Changes in Equipment, Systems, Etc USBFS reserves the right to make changes from time to time, as it deems advisable, relating to its systems, programs, rules, operating schedules and equipment, so long as such changes do not adversely affect the services provided to the Trust under this Agreement.

  • Description of Units Subject to the terms hereof the Fund proposes to issue and to offer for sale an aggregate of 15,000,000 of its limited liability company member units (the “Units”), at a price of $10 per Unit through you and those licensed brokers, if any, designated by you.

  • Additional Units The General Partner may from time to time in its sole and absolute discretion admit any Person as an additional Limited Partner of the Partnership (each such Person, if so admitted, an “Additional Limited Partner” and, collectively, the “Additional Limited Partners”). A Person shall be deemed admitted as a Limited Partner at the time such Person (i) executes this Agreement or a counterpart of this Agreement and (ii) is named as a Limited Partner in the books of the Partnership. Each Substitute Limited Partner shall be deemed an Additional Limited Partner whose admission as an Additional Limited Partner has been approved in writing by the General Partner for all purposes hereunder. Subject to the satisfaction of the foregoing requirements and Sections 4.1(c) and 10.2(b), the General Partner is hereby expressly authorized to cause the Partnership to issue additional Units for such consideration and on such terms and conditions, and to such Persons, including the General Partner, any Limited Partner or any of their Affiliates, as shall be established by the General Partner in its sole and absolute discretion, in each case without the approval of any other Partner or any other Person. Without limiting the foregoing, but subject to Sections 4.1(c) and 10.2(b), the General Partner is expressly authorized to cause the Partnership to issue Units (A) upon the conversion, redemption or exchange of any debt or other securities issued by the Partnership, (B) for less than fair market value or no consideration, so long as the General Partner concludes that such issuance is in the best interests of the Partnership and its Partners, and (C) in connection with the merger of any other Person into the Partnership if the applicable merger agreement provides that Persons are to receive Units in exchange for their interests in the Person merging into the Partnership. The General Partner is hereby expressly authorized to take any action, including without limitation amending this Agreement without the approval of any other Partner, to reflect any issuance of additional Units. Subject to Sections 4.1(c) and 10.2(b), additional Units may be Class A Common Units, Class B Common Units or other Units.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!