SYSTEM: CENTRAL AIR CONDITIONING Sample Clauses

SYSTEM: CENTRAL AIR CONDITIONING. 10.1 The inspector shall observe: A. central air conditioning including: 1. cooling and air handling equipment. 2. normal operating controls. B. distribution systems including: 1. fans, pumps, ducts and piping, with supports, dampers, insulation, air filters, registers, fan-coil units. 2. the presence of an installed cooling source in each room. 10.2 The inspector shall: A. describe: 1. energy sources. 2. cooling equipment type. B. operate the systems using normal operating controls. C. open readily openable access panels provided by the manufacturer or installer for routine homeowner maintenance. 10.3 The inspector is NOT required to: A. operate cooling systems when weather conditions or other circumstances may cause equipment damage. B. observe non-central air conditioners. C. observe the uniformity or adequacy of cool-air supply to the various rooms.
AutoNDA by SimpleDocs

Related to SYSTEM: CENTRAL AIR CONDITIONING

  • Air Conditioning If the Apartment has been provided with a ledge for split air conditioning system with suitable provision for keeping outdoor units of the AC system and also the route to take refrigerant piping, which the Allottee shall have to strictly follow while installing AC units

  • Heating and Air Conditioning Xxxxxx agrees to furnish to Lessee heating and air conditioning equipment and maintain same in satisfactory operating condition at all times for the Premises during the term of the Lease at the expense of Lessor. Xxxxxx agrees that thermostats in the Premises will be set to maintain an average zone temperature of 75 degrees Fahrenheit during the heating and cooling seasons.

  • Heating, Ventilating and Air Conditioning General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.

  • Installation Services The Bitstream 2a Service includes a Standard Install as set out below (in each case to the extent that the relevant provisioning works are not already complete for the relevant Service Order).1

  • Interconnection Service Interconnection Service allows the Interconnection Customer to connect the Large Generating Facility to the Participating TO’s Transmission System and be eligible to deliver the Large Generating Facility’s output using the available capacity of the CAISO Controlled Grid. To the extent the Interconnection Customer wants to receive Interconnection Service, the Participating TO shall construct facilities identified in Appendices A and C that the Participating TO is responsible to construct.

  • Standard Services As long as Tenant is not in default under any of the provisions of this Lease, Landlord shall cause the Leased Premises (in accordance with Section 10.3 below) and the public and common areas of the Building, (and the Project Common Areas), including the lobbies, elevators, stairs, corridors and rest rooms, to be maintained in reasonably good order and condition consistent with the operation and maintenance of the Building as a first-class office building in downtown Bellevue, except for damage occasioned by any act or omission of Tenant or Tenant's officers, contractors, agents, invitees, licensees or employees, the repair of which shall be paid for by Tenant ,so long as damage occasioned by other tenants and their officers, contractors, agents, invitees, licensees or employees, is paid for by such other tenants. From 7:00 a.m. to 6:00 p.m. on weekdays, excluding legal holidays, and from 8:00 a.m. to noon on Saturdays ("Regular Business Hours"), Landlord shall furnish the Leased Premises with electricity for lighting and operation of low power usage office machines, water, heat, air conditioning and elevator service as is customary and anticipated by tenants in a first-class office building (the "Standard Services"). During all other hours, Landlord shall furnish the Standard Services, including elevator service as reasonably required to provide access to the Leased Premises, except for heat and air conditioning and lighting. If requested by Tenant, Landlord shall furnish heat and air conditioning and lighting at times other than Regular Business Hours and the cost of such services, as established by Landlord (which in no event shall exceed Landlords' actual cost of such services), shall be paid by Tenant in the same manner as provided in Section 4.1 above. Landlord also shall provide lamp replacement service for Building Standard fluorescent light fixtures (but not for any specialty lighting installed by Tenant), toilet room supplies, window washing at reasonable intervals and customary building janitorial service in the Leased Premises consistent with those services in other first-class office buildings as part of the Standard Services, although no janitorial service shall be provided for Saturdays, Sundays or legal holidays. The cost and expense of any janitorial or other services provided or caused to be provided by Landlord to Tenant in addition to the services ordinarily provided Building tenants or is excessive relative to services provided to other tenants in the Building generally, Tenant shall reimburse Landlord upon demand for the additional cost resulting from such services, which shall be paid by Tenant in the same manner as provided for payment in Section 4.1 above. Standard Services shall not include any security services exclusively for Tenant within the Leased Premises. General security services will be provided in a manner consistent with the nature of the Project, and its cost will be allocated as a Building and/or Project Operating Cost. Landlord has not and does not make any representations to Tenant and assumes no responsibility to Tenant that the security services that are provided by Landlord will be effective in preventing any harm, both physical and economic, to Tenant or any of Tenant's employees or invitees. The HVAC system that Landlord shall install in the Building is generally described in Schedule D-1 and, among other things, shall allow temperature adjustments to be made in the Leased Premises on a zone by zone basis on each floor. Tenant shall pay any and all costs required to implement the features of the system by which Tenant may make temporary adjustments on a zone by zone basis on each floor . Any services provided by Landlord under this Section 6.4 shall be applied consistently and in a nondiscriminatory manner.

  • Transportation Services i) In the event that transportation services for a student served by CONTRACTOR pursuant to an Individual Services Agreement are to be provided by a party other than CONTRACTOR or the LEA or its transportation providers, such services shall be reflected in a separate agreement signed by the parties hereto, and provided to the LEA and SELPA Director by the CONTRACTOR. Except as provided below, CONTRACTOR shall compensate the transportation provider directly for such services, and shall charge the LEA for such services at the actual and reasonable rates billed by the transportation provider, plus a ten percent (.

  • Electrical Service Electrical service for new construction or a renovated existing building shall be 480/277-volt, 3-phase, 4-wire or approved equal. Service shall be sized for HVAC and other mechanical system(s) loads, lighting, general building services, and dedicated computer based office equipment loads. 5 xxxxx per square foot shall be provided for lighting and general service receptacles. Size of neutral conductor of 3- phase circuits shall be twice that of phase conductor to accommodate potential harmonic currents associated with computer system electronic power supplies and fluorescent lighting fixtures electronic ballasts.

  • Quality Management System Supplier hereby undertakes, warrants and confirms, and will ensue same for its subcontractors, to remain certified in accordance with ISO 9001 standard or equivalent. At any time during the term of this Agreement, the Supplier shall, if so instructed by ISR, provide evidence of such certifications. In any event, Supplier must notify ISR, in writing, in the event said certification is suspended and/or canceled and/or not continued.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!