Targets Not Selected Sample Clauses

Targets Not Selected. Unless included as mutually agreed by the Parties within the scope of the Second Extended Research Term, and subject to the licenses granted in accordance with Section 4.4, each Party is free to further research, develop and commercialize Targets that are not Draft Pick Targets and compounds directed to such Targets. Within [**] after the last Draft Pick Target is selected from the Draft Pool, Genentech and Constellation shall each submit to the other, to the extent related to any Targets that are not Draft Pick Targets: detailed procedures for synthesizing any compounds discovered in performance of the Research Collaboration, and any other information and data (including raw data) generated by such Researching Party during the Research Collaboration and not previously exchanged between the Researching Parties.
AutoNDA by SimpleDocs
Targets Not Selected. Effective immediately following the finalization of the Draft Pool, Constellation grants to Genentech a non-exclusive, worldwide, perpetual, irrevocable, royalty-free, fully paid-up, sublicensable license under the Constellation Other IP to make, have made, use, sell, offer for sale, import, research, discover and develop Targets that are not Draft Pick Targets, and compounds and products that are directed to any such Targets and do not meet the Compound Criteria for either Party’s Draft Pick Targets, including any Companion Diagnostics for use with such compounds and products.
Targets Not Selected. With respect to a Target that is presented to the JSC as a Candidate Target but is not selected by the JSC as a Selected Target, prior to [ * ] wherein Exelixis [ * ] would pursue such Target with the intent of developing, for use in the Applicable Field, products incorporating small molecules, Exelixis shall provide P&U with the opportunity to consider whether it wishes to acquire such a license. P&U shall have [ * ] following such offer in which to inform Exelixis in writing that it is interested in acquiring such a license. Thereafter, the Parties shall negotiate in good faith for [ * ] to reach agreement on the terms of a license agreement which shall be set forth in either an executed license agreement or an executed legally binding heads of agreement. If P&U fails to notify Exelixis of its interest or the Parties fail to execute a license agreement or a legally binding heads of agreement within the applicable period, then P&U shall have no further rights with respect to said Target and Exelixis shall have unrestricted rights to pursue (without compensation to P&U) the Target, including, but not limited to, conducting Independent Research on said Target and developing or commercializing products incorporating, based upon or identified using said Target. The foregoing rights shall terminate for each Target [ * ] after the date the JSC decided not to select it as a Selected Target.

Related to Targets Not Selected

  • Shift Selection Employee assignments within the Patrol Bureau will occur between approximately April 1-15 and shall be awarded based upon seniority. Approximately three (3) months before then the Department will publish a call for written requests on shift assignment. Employees will make their first three (3) choices known. Employees will learn of the assignment, including days off associated with their assignment, immediately after the bidding process is completed. Assignments will take effect on the schedule immediately following July 1st. Residence Hall assignments will be made prior to all others. No officer will be required to work a Residence Hall assignment in consecutive years. Assignment of the remaining officers will begin with selection(s) for day and night shifts. The bid for assignments will continue until all positions are filled. The following general rules apply to assignments: 1. During the term of this Agreement, no employee will be reassigned to a different shift other than the shift awarded by seniority except in situations where the University cannot continue to provide police services. In the event a shift reassignment must occur, it will be offered to volunteers based on seniority. If there are no volunteers it will be assigned to the least senior officer in the department. 2. Shift selection shall be an appropriate subject for the Joint Labor/Management Committee. 3. If a shift becomes available as a result of trainees being released for duty, and if there is at least four (4) months until the next shift change, the shift will be posted and awarded by seniority. The new trainee released for duty will take the senior officers shift. If no employee desires the shift, the trainee scheduled for assignment will be assigned that shift. The parties recognize that for the betterment of the Department it may be necessary to assign a trainee to a specific shift. 4. Voluntary shift trades will be allowed as long as overtime costs are not incurred. 5. Except in a bona fide emergency, no employee shall be assigned to work more than sixteen (16) hours in a twenty-four (24) hour period, provided however employees may volunteer to work up to eighteen (18) hours in a twenty-four (24) hour period.

  • Panel Selection 1. The Parties shall apply the following procedures in selecting a Panel: (a) the Panel shall comprise 3 members; (b) within 15 days following the date of the establishment of the Panel, each Party shall nominate a Panelist; (c) the Parties shall endeavor 2. If a Panelist appointed under this Article resigns or becomes unable to act, a successor Panelist shall be appointed within 30 days in accordance with the selection procedure as prescribed for the appointment of the original Panelist and the successor shall have all the powers and duties of the original Panelist. The work of the Panel shall be suspended during the appointment of the successor Panelist.

  • Competing Products The provisions of Section 21 are set forth on attached Exhibit H and are incorporated in this Section 21 by this reference.

  • Desirable Selection Criteria Post registration qualification in the area of specialty or evidence of significant progression towards one.

  • Preference for domestically manufactured goods The provisions of paragraphs 2.54 and 2.55 of the Guidelines and Appendix 2 thereto shall apply to goods manufactured in the territory of the Borrower.

  • Selection Criteria Each Contract is secured by a new or used Motorcycle. No Contract has a Contract Rate less than 1.00%. Each Contract amortizes the amount financed over an original term no greater than 84 months (excluding periods of deferral of first payment). Each Contract has a Principal Balance of at least $500.00 as of the Cutoff Date.

  • ETHICS IN PUBLIC CONTRACTING This Contract incorporates by reference Article 9 of the Arlington County Purchasing Resolution, as well as all state and federal laws related to ethics, conflicts of interest or bribery, including the State and Local Government Conflict of Interests Act (Code of Virginia § 2.2-3100 et seq.), the Virginia Governmental Frauds Act (Code of Virginia § 18.2-498.1 et seq.) and Articles 2 and 3 of Chapter 10 of Title 18.2 of the Code of Virginia, as amended (§ 18.2-438 et seq.). The Contractor certifies that its proposal was made without collusion or fraud; that it has not offered or received any kickbacks or inducements from any other offeror, supplier, manufacturer or subcontractor; and that it has not conferred on any public employee having official responsibility for this procurement any payment, loan, subscription, advance, deposit of money, services or anything of more than nominal value, present or promised, unless consideration of substantially equal or greater value was exchanged.

  • Discontinued Products If a product or model is discontinued by the manufacturer, Contractor may substitute a new product or model if the replacement product meets or exceeds the specifications and performance of the discontinued model and if the discount is the same or greater than the discontinued model.

  • How to get a TIN If you do not have a TIN, apply for one immediately. To apply for an SSN, get Form SS-5, Application for a Social Security Card, from your local SSA office or get this form online at xxx.XXX.xxx. You may also get this form by calling 0-000-000-0000. Use Form W-7, Application for IRS Individual Taxpayer Identification Number, to apply for an ITIN, or Form SS-4, Application for Employer Identification Number, to apply for an EIN. You can apply for an EIN online by accessing the IRS website at xxx.xxx.xxx/Xxxxxxxxxx and clicking on Employer Identification Number (EIN) under Starting a Business. Go to xxx.xxx.xxx/Xxxxx to view, download, or print Form W-7 and/or Form SS-4. Or, you can go to xxx.xxx.xxx/XxxxxXxxxx to place an order and have Form W-7 and/or SS-4 mailed to you within 10 business days. If you are asked to complete Form W-9 but do not have a TIN, apply for a TIN and write “Applied For” in the space for the TIN, sign and date the form, and give it to the requester. For interest and dividend payments, and certain payments made with respect to readily tradable instruments, generally you will have 60 days to get a TIN and give it to the requester before you are subject to backup withholding on payments. The 60-day rule does not apply to other types of payments. You will be subject to backup withholding on all such payments until you provide your TIN to the requester.

  • Combination Products If a LICENSED PRODUCT is sold to any third party in combination with other products, devices, components or materials that are capable of being sold separately and are not subject to royalties hereunder (“OTHER PRODUCTS,” with the combination of products being referred to as “COMBINATION PRODUCTS” and the Other Product and Licensed Product in such Combination Product being referred to as the “COMPONENTS”), the NET SALES of such LICENSED PRODUCT included in such COMBINATION PRODUCT shall be calculated by multiplying the NET SALES of the COMBINATION PRODUCT by the fraction A/(A+B), where A is the average NET SALES price of such LICENSED PRODUCT in the relevant country, as sold separately, and B is the total average NET SALES price of all OTHER PRODUCTS in the COMBINATION PRODUCT in the relevant country, as sold separately. If, in any country, any COMPONENT is not sold separately, NET SALES for royalty determination shall be determined by the formula [C / (C+D)], where C is the aggregate average fully absorbed cost of the Licensed Product components during the prior Royalty Period and D is the aggregate average fully absorbed cost of the other essential functional components during the prior Royalty Period, with such costs being determined in accordance with generally accepted accounting principles. To the extent that any SUBLICENSE INCOME relates to a COMBINATION PRODUCT or is otherwise calculated based on the value of one or more licenses or intellectual property rights held by the COMPANY, an AFFILIATE or SUBLICENSEE, COMPANY shall determine in good faith and report to THE PARTIES the share of such payments reasonably attributable to COMPANY’s or such AFFILIATE’s sublicense of the rights granted hereunder, based upon their relative importance and proprietary protection, which portion shall be the SUBLICENSE INCOME. THE PARTIES shall have the right to dispute such sharing determination in accordance with the dispute provisions of the AGREEMENT.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!