Technical specifications for Greenfield Public Street Lighting System Sample Clauses

Technical specifications for Greenfield Public Street Lighting System a) Minimum technical specifications for LED Luminaires The Project SPV should submit a detail Equipment Installation Plan to Authority with number of LED Luminaires of different ratings specific to each group of road considering the ULB requirements on wattage of LED Luminaires for different road groups as specified in section 1 of this schedule. Along with Equipment Installation Plan, Project SPV should provide Authority with Sphere Spectroradiometry Test Data in LM 79 report specific to proposed LED luminaire ratings and other technical details of LED Luminaires as specified below. Parameter Specification/ type of test Test methods/ standards LED packages Parameter Specification/ type of test Test methods/ standards LED Sourcing Identical LED packages, quoted below, are to be used in all LED Luminaires of any given wattage rating (make, order code/part number, operating current and luminous efficacy at operating current). Operating current of LED ( design)  <70% of rated maximum forward current, in the range of 350 to 1000 mA. (having LM80 approval on this current rating)  Project SPV to mention the details of make and order code/part number of LEDs along with design operating current. For Equipment Installation Plan approval, Project SPV should submit LM 80, TM 21 data at that current Luminous efficacy  ≥135 Lumens/watt ( at Tj 850 C & at operating current (design) )  Project SPV to specify number of LED Packages which will be provided in each LED Luminaire (to be mentioned for each LED Luminaire rating) along with the wattage and luminous efficacy of LED at operating current. LM-80/IS16105 test report including technical data sheet of LED Chip from ILAC/ MRA/ XXXXX/ NVLAP/ EPA international certifying agencies – to be submitted for Equipment Installation Plan Approval Color rendering index (CRI) >70 Lifespan of LEDs & lumen depreciation > 50,000 Hours ( at operating current (design) & lumen depreciation less than 30% over the lifespan of 50,000 hours; (submit L70 & TM 21 Test Report) LED Luminaire Wattage Rating 000X, 00X, 00X, 00X for different road groups as specified in section 1 of this schedule Project SPV to mention the wattage of LED Luminaires offered for different road groups as Part of Equipment Installation Plan. System efficacy (Lumen/ watt) > 120 Lumens /W LM 79/IS 16106- 2012 from NABL certified TPL to be provided by Project SPV as part of Equipment Installation Plan. CRI of LED Luminaire >70 Co-related color temperature of the LED Lu...
Sample 1
AutoNDA by SimpleDocs

Related to Technical specifications for Greenfield Public Street Lighting System

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Technical Standards Applicable to a Wind Generating Plant i. Low Voltage Ride-Through (LVRT) Capability A wind generating plant shall be able to remain online during voltage disturbances up to the time periods and associated voltage levels set forth in the standard below. The LVRT standard provides for a transition period standard and a post-transition period standard.

  • Technical Specification As enumerated in Special Conditions of Contract/Scope of Work/attached Drawing/ Details/Schedule of Rates.

  • General specifications 6.1.1. A vehicle and its electrical/electronic system(s) or ESA(s) shall be so designed, constructed and fitted as to enable the vehicle, in normal conditions of use, to comply with the requirements of this Regulation.

  • Provisioning of High Frequency Spectrum and Splitter Space 3.2.1 BellSouth will provide <<customer_name>> with access to the High Frequency Spectrum as follows:

  • Loop Provisioning Involving Integrated Digital Loop Carriers 2.6.1 Where InterGlobe has requested an Unbundled Loop and BellSouth uses IDLC systems to provide the local service to the End User and BellSouth has a suitable alternate facility available, BellSouth will make such alternative facilities available to InterGlobe. If a suitable alternative facility is not available, then to the extent it is technically feasible, BellSouth will implement one of the following alternative arrangements for InterGlobe (e.g. hairpinning):

  • DAF Specifications Developer shall submit initial specifications for the DAF, including System Protection Facilities, to Connecting Transmission Owner and NYISO at least one hundred eighty (180) Calendar Days prior to the Initial Synchronization Date; and final specifications for review and comment at least ninety (90) Calendar Days prior to the Initial Synchronization Date. Connecting Transmission Owner and NYISO shall review such specifications to ensure that the DAF are compatible with the technical specifications, operational control, and safety requirements of the Connecting Transmission Owner and NYISO and comment on such specifications within thirty (30) Calendar Days of Developer’s submission. All specifications provided hereunder shall be deemed to be Confidential Information.

  • Joint Network Implementation and Grooming Process Upon request of either Party, the Parties shall jointly develop an implementation and grooming process (the “Joint Grooming Process” or “Joint Process”) which may define and detail, inter alia:

  • Packaging Materials and Containers for Retail Sale Packaging materials and containers in which a good is packaged for retail sale shall, if classified with the good, be disregarded in determining whether all the non-originating materials used in the production of the good undergo the applicable change in tariff classification set out in Annex 4, and, if the good is subject to a regional value-content requirement, the value of such packaging materials and containers shall be taken into account as originating or non-originating materials, as the case may be, in calculating the regional value content of the good.

  • Purchase Order Flip via Ariba Network (AN) The online process allows suppliers to submit invoices via the AN for catalog and non- catalog goods and services. Contractors have the ability to create an invoice directly from their Inbox in their AN account by simply “flipping” the purchase order into an invoice. This option does not require any special software or technical capabilities. For the purposes of this section, the Contractor warrants and represents that it is authorized and empowered to and hereby grants the State and the third-party provider of MFMP the right and license to use, reproduce, transmit, distribute, and publicly display within the system the information outlined above. In addition, the Contractor warrants and represents that it is authorized and empowered to and hereby grants the State and the third-party provider the right and license to reproduce and display within the system the Contractor’s trademarks, system marks, logos, trade dress, or other branding designation that identifies the products made available by the Contractor under the Contract.

Time is Money Join Law Insider Premium to draft better contracts faster.