Test conditions. 6.1.1. The test shall be performed on a flat. dry concrete or asphalt surface affording good adhesion. 6.1.1.1. The road test surface shall have a nominal3 peak braking coefficient (PBC) of 0.9. unless otherwise specified. when measured using either: 6.1.1.2. The American Society for Testing and Materials (ASTM) E1136 standard reference test tyre. in accordance with ASTM Method E1337-90. at a speed of 40 mph; or 6.1.1.3. The k-test method specified in Appendix 2 to Annex 6 of UN Regulation No. 13-H. 6.1.1.4. The test surface has a consistent slope between level and 1 per cent. 6.1.2. The ambient temperature shall be between 0°C and 45°C. 6.1.3. The horizontal visibility range shall allow the target to be observed throughout the test.
Appears in 2 contracts
Samples: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Test conditions. 6.1.1. The test shall be performed on a flat. dry concrete or asphalt surface affording good adhesion.
6.1.1.1. The road test surface shall have a nominal3 nominal8 peak braking coefficient (PBC) of 0.9. unless otherwise specified. when measured using either:
6.1.1.2. The American Society for Testing and Materials (ASTM) E1136 standard reference test tyre. in accordance with ASTM Method E1337-90. at a speed of 40 mph; or
6.1.1.3. The k-test method specified in Appendix 2 to Annex 6 of UN Regulation No. 13-H.
6.1.1.4. The test surface has a consistent slope between level and 1 per cent.
6.1.2. The ambient temperature shall be between 0°C and 45°C.
6.1.3. The horizontal visibility range shall allow the target to be observed throughout the test.
Appears in 2 contracts
Samples: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Test conditions. 6.1.1. The test shall be performed on a flat. dry concrete or asphalt surface affording good adhesion.
6.1.1.1. The road test surface shall have a nominal3 nominal9 peak braking coefficient (PBC) of 0.9. unless otherwise specified. when measured using either:
6.1.1.2. The American Society for Testing and Materials (ASTM) E1136 standard reference test tyre. in accordance with ASTM Method E1337-90. at a speed of 40 mph; or
6.1.1.3. The k-test method specified in Appendix 2 to Annex 6 of UN Regulation No. 13-H.
6.1.1.4. The test surface has a consistent slope between level and 1 per cent.
6.1.2. The ambient temperature shall be between 0°C and 45°C.
6.1.3. The horizontal visibility range shall allow the target to be observed throughout the test.
Appears in 2 contracts
Samples: Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles, Agreement Concerning the Adoption of Harmonized Technical United Nations Regulations for Wheeled Vehicles
Test conditions. 6.1.1. The test shall be performed on a flat. dry concrete or asphalt surface affording good adhesion.
6.1.1.1. The road test surface shall have a nominal3 peak braking coefficient (PBC) of 0.9. unless otherwise specified. when measured using either:
6.1.1.2. The American Society for Testing and Materials (ASTM) E1136 standard reference test tyre. in accordance with ASTM Method E1337-90E1337‑90. at a speed of 40 mph; or
6.1.1.3. The k-test method specified in Appendix 2 to Annex 6 of UN Regulation No. 13-H.
6.1.1.4. The test surface has a consistent slope between level and 1 per cent.
6.1.2. The ambient temperature shall be between 0°C and 45°C.
6.1.3. The horizontal visibility range shall allow the target to be observed throughout the test.
Appears in 1 contract
Test conditions. 6.1.1. The test shall be performed on a flat. dry concrete or asphalt surface affording good adhesion.
6.1.1.1. The road test surface shall have a nominal3 nominal8 peak braking coefficient (PBC) of 0.9. unless otherwise specified. when measured using either:
6.1.1.2. The American Society for Testing and Materials (ASTM) E1136 standard reference test tyre. in accordance with ASTM Method E1337-90E1337‑90. at a speed of 40 mph; or
6.1.1.3. The k-test method specified in Appendix 2 to Annex 6 of UN Regulation No. 13-H.13‑H.
6.1.1.4. The test surface has a consistent slope between level and 1 per cent.
6.1.2. The ambient temperature shall be between 0°C and 45°C.
6.1.3. The horizontal visibility range shall allow the target to be observed throughout the test.
Appears in 1 contract
Test conditions. 6.1.1. The test shall be performed on a flat. dry concrete or asphalt surface affording good adhesion.
6.1.1.1. The road test surface shall have a nominal3 peak braking coefficient (PBC) of 0.9. unless otherwise specified. when measured using either:
6.1.1.2. The American Society for Testing and Materials (ASTM) E1136 standard reference test tyre. in accordance with ASTM Method E1337-90E1337‑90. at a speed of 40 mph; or
6.1.1.3. The k-test method specified in Appendix 2 to Annex 6 of UN Regulation No. 13-H.
6.1.1.4. The test surface has a consistent slope between level and 1 per cent.
6.1.2. The ambient temperature shall be between 0°C and 45°C.
6.1.3. The horizontal visibility range shall allow the target to be observed throughout the test.
Appears in 1 contract
