Instrumentation and Metering. Seller shall provide all instrumentation, metering and data collection equipment required to perform the SCT. The instrumentation, metering and data collection equipment electrical meters shall be calibrated in accordance with Prudent Operating Practice.
Instrumentation and Metering. Seller shall provide all instrumentation, metering and data collection equipment required to perform the test. Wherever possible, the instrumentation, metering and data collection equipment that will be used after the Commercial Operation Date for monitoring and controlling the operation of the Facility and collecting the data required for Seller to prepare and submit its monthly invoice to Department shall be used for the test. Seller shall calibrate or cause to be calibrated all such instrumentation, metering and data collection equipment no more than three (3) months prior to the date of the test. All electrical metering equipment shall utilize the plant’s installed CAILSO metering equipment calibrated to CALISO standards.
Instrumentation and Metering. The Parties shall use the same instrumentation and metering as was used in the Initial Commercial Operation Test, unless the Parties otherwise agree in writing.
Instrumentation and Metering. Seller shall provide all instrumentation, metering and data collection equipment required to perform the Commercial Operation Test. Instrumentation shall include all instruments permanently installed at the Project and the temporary instruments suggested by Seller or deemed necessary by Buyer in its sole judgement. Within thirty (30) days of Xxxxx’s receipt of Seller’s Proposed Test Plan, Buyer shall provide Seller with written notice of the temporary calibrated instrumentation deemed necessary by Buyer that will be used during the Commercial Operation Test. Wherever possible, the instrumentation, metering and data collection equipment that will be used after the Project achieves the Initial Delivery Date for monitoring and controlling the operation of the Project shall be used for the Commercial Operation Test. Seller shall calibrate or cause to be calibrated all such instrumentation, metering and data collection equipment no more than three (3) months prior to the date of the Commercial Operation Test. All electrical metering equipment shall utilize the Project’s installed CAISO metering equipment calibrated to CAISO standards. Copies of all calbration sheets shall be provided to Buyer at least five (5) Business Days prior to the Commercial Operation Test.
Instrumentation and Metering. Seller shall provide all instrumentation, metering and data collection equipment required to perform the Test. Seller shall calibrate or cause to be calibrated all such instrumentation, metering and data collection equipment no more than three (3) months prior to the date of the Test. All electrical metering for the Tests shall utilize the Storage Unit(s)’ CAISO metering equipment or other metering deemed acceptable by SCE in its sole discretion. These electrical meters shall be calibrated to CAISO standards. Copies of all calbration sheets shall be provided to SCE at least five (5) Business Days prior to the Test. Permanently installed instruments shall include but not be limited to revenue metering devices located in the switchyard where the Project is located. Whenever possible, all data will be accessed through the Storage Unit’s DCS.
Instrumentation and Metering. At its own cost, Seller shall provide all instrumentation, metering and data collection equipment required to perform the test. Wherever possible, the instrumentation, metering and data collection equipment that will be used after the Unit achieves COD for monitoring and controlling the operation of the Unit and collecting the data required for Seller to prepare and submit its monthly invoice to Buyer shall be used for the test. At its own cost, Seller shall calibrate or cause to be calibrated all such instrumentation, metering and data collection equipment no more than three (3) months prior to the date of the test. All Electrical Metering Equipment shall be in compliance with CAISO Requirements including, but not limited to, those relating to certification and calibration.
Instrumentation and Metering. The Seller shall provide all instrumentation, metering and data collection equipment required to perform the test. Wherever possible, the instrumentation, metering and data collection equipment that will be used for monitoring and controlling the operation of the Facility and collecting the data required for the Seller to prepare and submit its monthly invoice to Buyer shall be used for the test. The Seller shall calibrate or cause to be calibrated all such instrumentation, metering and data collection equipment no more than three (3) months prior to the date of the test. All electrical metering equipment shall utilize the plant’s installed CAISO metering equipment calibrated to CAISO standards.
Instrumentation and Metering. At its own cost, Seller shall provide all instrumentation, metering and data collection equipment required to perform the test. Wherever possible, the instrumentation, metering and data collection equipment that will be used after the Unit achieves COD for monitoring and controlling the operation of the Unit and collecting the data required for Seller to prepare and submit its monthly invoice to Buyer shall be used for the test. At its own cost, Seller shall calibrate or cause to be calibrated all such instrumentation, metering and data collection equipment no more than three (3) months prior to the date of the test. All Electrical Metering Equipment shall be in compliance with CAISO Requirements including, but not limited to, those relating to certification and calibration. Seller shall perform the calculation of NDC and NDDC using the test data subject to the following adjustments: The net output for each data point shall be adjusted to Site Standard Conditions by using the following sequential three-step correction procedure:
Instrumentation and Metering. Seller shall provide all instrumentation, metering and data collection equipment required to perform the ICOT. Instrumentation shall include all instruments permanently installed and any temporary instruments needed to acquire data for Seller to measure, record and determine the test data required pursuant to Part II.B. and demonstrate compliance with the “Maximum Permissible Standard Deviations” set forth in Part II.D. Within seven (7) Business Days of SCE’s receipt of Seller’s Proposed Test Plan, Seller shall provide SCE with written notice describing the temporary instrumentation required for and to be used during the ICOT. Wherever possible, the instrumentation, metering and data collection equipment used during the ICOT shall be the same used for monitoring and controlling operation of the Generating Unit(s) following the Test. Seller shall calibrate, or cause to be calibrated, all such instrumentation, metering and data collection equipment, permanent or temporary, no more than ninety (90) days prior to the date of the ICOT. Copies of all calbration records for the aforementioned instruments shall be provided to SCE at no less than seven (7) Business Days prior to the Test. The ICOT will be delayed on a day-for-day basis until such calibration records have been received by SCE. Whenever possible, data will be accessed through the Generating Unit(s)’ DCS. In addition, Seller shall provide a temporary Data Acquisition System (“DAS”) to monitor, record and measure data acquired by any temporary instruments. A pre- and post- Test Uncertainty Analysis will be provided by the Seller so as to quantify the impact from changes to the measured parameters necessary for the calculation of Contract Capacity and Heat Rate.
Instrumentation and Metering. Seller shall use the same instrumentation and metering as was used in the ICOT, unless the Parties agree otherwise in writing.
