Tool Checking Time Sample Clauses

Tool Checking Time. Employees in the Maintenance Section, who are required to check out tools, shall be allowed a reasonable time, not to exceed fifteen (15) minutes, before the end of the scheduled work day, in which to clean their tools and check them in to the tool room.
AutoNDA by SimpleDocs
Tool Checking Time. Section 1

Related to Tool Checking Time

  • TRAVELLING TIME 9.01 When the Employer requires an employee to travel for the purpose of performing duties the employee shall be compensated in the following manner: (a) on a normal working day on which an employee travels but does not work, the employee shall receive regular pay for the day. (b) on a normal working day on which an employee travels and works, the employee shall be paid: (i) regular pay for the day for a combined period of travel and work not exceeding seven and one-half (7 ½) hours, (ii) at the applicable overtime rate for additional travel time in excess of a seven and one-half (7 ½) hour period of work and travel, with a maximum payment for such additional travel time not to exceed twelve (12) hours pay in any day, calculated at the straight-time rate. (c) on a day of rest or on a designated paid holiday, the employee shall be paid at the applicable overtime rate for hours travelled to a maximum payment of twelve (12) hours pay, calculated at the straight-time rate. 9.02 For the purpose of clause 9.01, the travelling time for which an employee shall be compensated is as follows: (a) for travel by public transportation, the time between the scheduled time of departure and the time of arrival at a destination, including the normal travel time to the point of departure, as determined by the Employer; (b) for travel by private means of transportation, the normal time as determined by the Employer, to proceed from the employee’s place of residence or work place, as applicable, direct to the destination and, upon return, direct back to the employee’s residence or work place; (c) in the event that an alternate time of departure and/or means of travel is requested by the employee, the Employer may authorize such alternate arrangements in which case compensation for travelling time shall not exceed that which would have been payable under the Employer’s original determination. Such request shall not be unreasonably denied; (d) when an employee travels through more than one (1) time zone, computation will be made as if the employee had remained in the time zone of the point of origin for continuous travel and in the time zone of each point of overnight stay after the first day of travel. 9.03 All calculations for travelling time shall be based on each completed period of fifteen (15) minutes. 9.04 Travelling time shall include time necessarily spent at each stop-over en route provided that such stop-over does not include an overnight stay. 9.05 Compensation under this Article shall not be paid for travel time to courses, training sessions, conferences and seminars unless so provided for in Article 18 (Career Development and Training).

  • Starting Time is the time that employees present themselves at their work- station and not the time that employees are in the amenities or in the car park.

  • Excess Travelling Time As well as the above-mentioned Fares allowance, excess travelling time is payable if the work site is beyond 50 kilometres from the workshop or registered office. Where an employee is required to travel to a job site outside the 50 kilometres from the Employer’s registered office or depot the employee will be paid the following: • A payment for time travelled in excess of the 50 kilometres with a minimum payment of a quarter of an hour. The rate will be: – Ordinary time Monday to Friday – Time and one half on Saturday and Sunday – Double time on public holidays • It is agreed between the parties that travel for the purposes of clause

  • Working Time 6.1 The standard working week for full time employees is 37 hours (36 in London). This may be calculated over a period other than a week in accordance with the provisions of Part 3. 6.2 Employees who are required to work non-standard patterns of work shall be compensated in accordance with the provisions of Part 3 Para 2. 6.3 Variations to the established working week or patterns of work will be reasonable and subject to adequate notice. 6.4 Working arrangements will comply with relevant Health and Safety legislation, including the European working time directive and its associated UK legislation.

  • Planning Time All teachers are to be guaranteed an uninterrupted daily block of at least 45 minutes of planning for a traditional schedule or an uninterrupted block of at least 90 minutes every other day for a block schedule. Planning time shall be used primarily for lesson/program planning, parent conferences, student conferences, and conferring with other faculty members. A good faith effort must be made by the principal or designee to ensure equitable scheduling among the faculty for teacher participation and involvement for any accommodation plan meeting (IEP (Individual Education Plan), 504, BIP (Behavior Intervention Plan), etc.) in which the teacher’s planning time and instructional time are disrupted as little as possible. a) The principal may have up to one (1) of these 45-minute blocks per week designated for Collaborative Planning, Professional Learning Community (PLC), or Faculty Meetings (one (1) per month) or other data gathering/planning intended to increase student achievement. b) The four (4) 45-minute planning periods for a traditional schedule or an uninterrupted block of at least 90 minutes every other day for a block schedule shall be used by the teacher solely for self-directed planning time. Recognizing that curriculum changes are inevitable throughout all areas of instruction, team/common planning may occur and is encouraged in order to meet the needs of the students. Teachers are responsible for the proper utilization of the self-directed portion of planning time. 6.3-1 During weeks when there is a full Staff Development Day, or a shortened week, teachers will still have four (4) days of self-directed planning that week. 6.3-2 Elementary school teachers shall have an uninterrupted, continuous block of time of no fewer than forty-five (45) minutes per day of scheduled duty free planning time during the student contact time. Should a continuous forty-five (45) minute block be unfeasible, the principal will schedule a continuous thirty (30) minute block during the student day and an additional fifteen (15) minute continuous block of time during the duty day for planning. Elementary teachers shall stay with their students when the students are participating in regularly scheduled special classes only when there is no certified instructor available. 6.3-3 Middle school teachers shall have an uninterrupted, continuous block of forty-five (45) minutes per day for a traditional schedule or an uninterrupted block of at least 90 minutes every other day for a block schedule of scheduled duty free planning time during the student contact time. Middle school schedules should include time for teacher planning time for such concepts as team planning, back to back planning periods, parent conferences, student conferences, etc. In middle schools that elect to participate in a seven (7) or eight (8) period day, the normal teaching load will be six (6) out of seven (7) or seven (7) out of eight (8) periods. (Advisor/advisee instruction will count as a teaching period.) Teachers, excluding those teachers assigned to Special Programs, may be asked, but shall not be involuntarily assigned a teaching schedule requiring more than three (3) preparations. To indicate acceptance of a schedule with more than three (3) preparations, the teacher must be presented with the schedule in writing and indicate acceptance by attaching their signature. 6.3-4 High school teachers shall have an uninterrupted, continuous block of forty-five (45) minutes per day for a traditional schedule or an uninterrupted block of at least 90 minutes every other day for a block schedule of duty free planning time during the student contact time. A normal teaching load will be six (6) out of seven (7) periods. Instructional time will be arranged according to the school’s approved schedule and in accordance with Southern Association of Colleges and Schools (SACS) guidelines. Teachers, excluding those teachers assigned to Special Programs, may be asked, but shall not be involuntarily assigned a teaching schedule requiring more than three (3) preparations. To indicate acceptance of a schedule with more than three (3) preparations, the teacher must be presented with the schedule in writing and indicate acceptance by attaching their signature. 6.3-5 Traviss and Ridge Technical College regular program and academic teachers shall have three hundred (300) minutes per week of planning time. 6.3-6 Adult School (East and West Areas) teachers shall have at least 250 minutes per week of planning 6.3-7 Teachers are required to make arrangements with the principal or immediate supervisor prior to 6.3-8 The Board shall structure a schedule for students that dismisses all students 150 minutes early to provide teachers 150 minutes of planning time in addition to the planning time described in Sections 6.3 through 6.3-5. There shall be at least seven (7) of these Student Early Dismissal Days distributed throughout the school year as mutually agreed upon. The days shall be designated six (6) Teacher Self- Directed Planning Days and one (1) Staff Development Day in March with a portion used for state testing training.

  • Rain at Starting Time Where the employees are in the sheds, because they have been rained off, or at starting time, morning tea, or lunchtime, and it is raining, they shall not be required to go to work in a dry area or to be transferred to another site unless: ⮚ The rain stops; or ⮚ A covered walkway has been provided; or ⮚ The sheds are under cover and the employees can get to the dry area without going through the rain; or ⮚ Adequate protection is provided. Protection shall, where necessary, be provided for the employees’ tools.

  • CONTRACTOR CUSTOMER SERVICE REPRESENTATIVE Contractor shall designate a customer service representative (and inform Enterprise Services of the same) who shall be responsible for addressing Purchaser issues pertaining to this Master Contract.

  • REPORTING TIME Any employee, after being hired and reporting for work at the regular reporting time and for whom no work is provided, shall receive pay for two (2) hours at the regular rate of wages. Any employee who reports for work and for whom work is provided shall receive pay for the actual time worked, but not less than two (2) hours at the regular rate of wages, unless they have been notified before leaving their home not to report.

  • What To Do If You Find A Mistake On Your Statement If you think there is an error on your statement, write to us at the address(es) listed on your statement. In your letter, give us the following information:

  • Professional Days The President of the College or the President’s designee may assign any faculty member up to seven (7) days during the academic year for scheduled orientation and registration programs, commencement and convocation activities and such other College sponsored activities the Present deems appropriate. Professional days shall be assigned no earlier than three (3) days prior to the first (1st) day of classes in the fall semester and no earlier than four (4) days prior to the first (1st) day of classes in the spring semester. Such duties and responsibilities may be assigned to individual faculty members in blocks in one-half (1/2) day or more; and provided further that a faculty member shall not be required to discharge these responsibilities over more than fourteen (14) days during the academic year.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!