Safety Plan Developer’s safety plan specifically adapted for the Project. Developer's Safety Plan shall comply with all provisions regarding Project safety, including all applicable provisions in these Construction Provisions.
Safety Boots Each employee, after 3 months’ continuous service, will be reimbursed (on production of a receipt), the cost of one pair of safety boots (approved by the employer), in each year, to a maximum of $110.00. All protective clothing such as wet weather jackets, safety helmets, welding jackets, welding xxxxxxx, welding gauntlets, rubber boots, etc, (which remain the property of the Company), will be supplied on all occasions deemed necessary.
Electrical appliance safety The Hirer shall ensure that any electrical appliances brought by them to the premises and used there shall be safe, in good working order, and used in a safe manner in accordance with the Electricity at Work Regulations 1989. Where a residual circuit breaker is provided the hirer must make use of it in the interests of public safety.
Fire Safety Resident will not tamper with fire alarms, smoke detectors, fire extinguishers, fire hoses, or exit signs. Resident will promptly evacuate Residence Facility upon the sounding of an alarm or as otherwise directed by College Housing staff. Resident will participate in any periodic fire drill and fire safety training conducted by College for the Residence Facility.
Safety Program The Contractor shall design a specific safety program for the Work for the site(s). The Contractor shall establish and require all Subcontractors to establish reasonable safety programs. The Contractor shall also submit its standard monthly safety reports to the Owner and Design Professional. No imposition of responsibility on the Contractor for safety under this Contract shall relieve any subcontractor of its responsibility for safety of persons or property on or near the Project Site. The Contractor shall include in his plant he names of the person in charge of Safety.
Rectification of Safety Hazard Where, because of the existence of a safety hazard, a site has been stopped for a defined period of time and Employees sent off site by agreement between Site Managers and any combination of Union Official/s, Health and Safety Committee, those people who remain on site to do rectification work will be paid at the rate of double time for all such work.
Accident Prevention Health and Safety Committee (a) The Employer and the Union agree that they mutually desire to maintain standards of safety and health in the workplace in order to prevent accidents, injury and illness.
(b) Recognizing its responsibilities under the applicable legislation, the Employer agrees to accept as a member of its Accident Prevention – Health & Safety Committee at least three (3) representatives, one from each base, selected or appointed by the Union from amongst bargaining unit employees. At any time where a vote is required, an equal number of representatives from each side shall be entitled to vote.
(c) Such Committee shall identify potential dangers and hazards, institute means of improving health and safety programs and recommend actions to be taken to improve conditions related to safety and health.
(d) The Employee agrees to co-operate reasonably in providing necessary information to enable the Committee to fulfill its functions.
(e) Meetings shall be held quarterly or more frequently at the call of the Chair if required. The Committee shall maintain minutes of all meetings and make the same available for review.
(f) Any representative appointed or select in accordance with (b) hereof shall serve a term of one (1) calendar year from the date of appointment which may be renewed for further periods of one (1) year. The Union will encourage its representative(s) to serve at least one (1) year. Time off for such representative(s) to attend meetings of the Accident Prevention – Health & Safety Committee in accordance with the foregoing shall be granted and time so spent attending such meetings shall be deemed to be work time for which the representative(s) shall be paid by the Employer at his regular or premium rate as may be applicable.
(g) The Union agrees to endeavour to obtain the full co-operation of its membership in the observation of all safety rules and practices.
(h) Pregnant employees may request to be transferred from their current duties if, in the professional opinion of the employee’s physician, the pregnancy may be at risk. If such a transfer is not feasible, the pregnant employee, if she so requests, will be granted an unpaid leave of absence before commencement of the maternity leave referred to in Article 16.04
Primary Frequency Response Developer shall ensure the primary frequency response capability of its Large Generating Facility by installing, maintaining, and operating a functioning governor or equivalent controls. The term “functioning governor or equivalent controls” as used herein shall mean the required hardware and/or software that provides frequency responsive real power control with the ability to sense changes in system frequency and autonomously adjust the Large Generating Facility’s real power output in accordance with the droop and deadband parameters and in the direction needed to correct frequency deviations. Developer is required to install a governor or equivalent controls with the capability of operating: (1) with a maximum 5 percent droop ± 0.036 Hz deadband; or (2) in accordance with the relevant droop, deadband, and timely and sustained response settings from an approved Applicable Reliability Standard providing for equivalent or more stringent parameters. The droop characteristic shall be: (1) based on the nameplate capacity of the Large Generating Facility, and shall be linear in the range of frequencies between 59 and 61 Hz that are outside of the deadband parameter; or (2) based on an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. The deadband parameter shall be: the range of frequencies above and below nominal (60 Hz) in which the governor or equivalent controls is not expected to adjust the Large Generating Facility’s real power output in response to frequency deviations. The deadband shall be implemented: (1) without a step to the droop curve, that is, once the frequency deviation exceeds the deadband parameter, the expected change in the Large Generating Facility’s real power output in response to frequency deviations shall start from zero and then increase (for under-frequency deviations) or decrease (for over-frequency deviations) linearly in proportion to the magnitude of the frequency deviation; or (2) in accordance with an approved Applicable Reliability Standard providing for an equivalent or more stringent parameter. Developer shall notify NYISO that the primary frequency response capability of the Large Generating Facility has been tested and confirmed during commissioning. Once Developer has synchronized the Large Generating Facility with the New York State Transmission System, Developer shall operate the Large Generating Facility consistent with the provisions specified in Articles 9.5.5.1 and 9.5.5.2 of this Agreement. The primary frequency response requirements contained herein shall apply to both synchronous and non-synchronous Large Generating Facilities.
SAFETY & HEALTH A. Employees covered by this Agreement who are uniformly and periodically required by the Company to take physical examinations because of the duties they perform shall be scheduled and paid for the time spent taking such examinations in accordance with the Company's established procedures for employees under this Agreement. The Company will schedule the exam in a way that is not unduly burdensome to the employee or the Company. The provisions of this Paragraph shall not apply to employees required to take physical examinations after absence due to illness or any physical examinations other than those specified above.
B. The Company hereby agrees to maintain safe, sanitary and healthful working conditions in all shops and facilities and to maintain on all shifts emergency first aid equipment at a first aid station to take care of its employees in case of accident or illness, and that sufficient employees will be given initial and recurrent first aid / CPR training. It is understood that this does not require the Company to maintain a nurse or doctor on the property, but in an emergency the Company will utilize the appropriate emergency services.
C. The Company agrees to furnish good drinking water and sanitary fountains; the floors of the toilets and washrooms will be kept in good repair and in a clean, dry, sanitary condition. Employees will cooperate in maintaining the foregoing conditions Shops and washrooms will be lighted and heated in the best manner possible consistent with the source of heat and light available. Individual lockers will be provided for all employees where space and lockers are available. Every effort will be made as early as possible to provide space and lockers for all employees.
D. The Company, Union, and employees will cooperate toward the prevention of accidents and the furtherance of an aggressive safety program. A joint Company-
E. The Company shall furnish all necessary safety devices for employees working on hazardous or unsanitary work, and employees will be required to use or wear such devices in performing such work.
F. The Company will furnish appropriate aprons, gloves and shoes to all employees required to work with acids and chemicals that are injurious to clothing while such employees are engaged in such activities, and employees will be required to wear such equipment.
G. Employees taken sick or injured while at work, shall be given medical attention as promptly as reasonably practicable. Employees will not be refused permission to return to work because they have not signed releases of liability pending the disposition or settlement of any claims which they may have for compensation arising out of such sickness or injury.
H. In cases of occupational injury or illness employees may elect to be treated by their personal physician, and decline treatment from others, provided they have their physician registered with United's medical department prior to the occurrence of illness or injury. The Company's physician will retain the right to monitor the employee's course of treatment.
I. United will maintain a Bloodborne Pathogen Exposure Control Plan which satisfies the requirements of the OSHA Bloodborne Pathogen regulations. Corporate Safety agrees to consider any proposed changes to the Plan that may be suggested by the Union in an effort to improve the safety of employees in their work environment and to solicit comments from the Union whenever routine revisions are made to the Plan. The Company agrees to make available, at no cost to covered employees, complete post- exposure evaluation including necessary blood work and medications.
J. The Flight Safety Committee shall function as described in Letter of Agreement #21.
K. In the event the IBT and the Company jointly petition the National Transportation Safety Board (NTSB) for, and are granted, formal party or observer status in connection with an investigation involving a Company incident or accident, the Company and the IBT will
L. Any MSAP program will be covered in a stand alone MOU between the Company, the Union and the FAA. While there is a valid MOU the Company will sponsor 1 full-time, IBT representative to participate on the ERC scheduled Mon-Fri, on traditional business hours. This position will in all respects be treated in a similar manner regarding necessary transportation as other IBT staff positions. The Company agrees to supply access to office space appropriate for the confidentiality needs of the position and access to office supplies.
M. In the event the Company requires employees covered by this Agreement to wear protective footwear as personal protective equipment, the Company will provide an allowance to such employees for the actual cost of protective footwear that complies with Company standards. Such allowance shall be up to a maximum of $52.80 per year per employee on a rolling calendar basis.
CONTRACT WORK HOURS AND SAFETY STANDARDS As per the Contract Work Hours and Safety Standards Act (40 U.S.C. 3701-3708), where applicable, all Customer Purchase Orders in excess of ,000 that involve the employment of mechanics or laborers must include a provision for compliance with 40 U.S.C. 3702 and 3704, as supplemented by Department of Labor regulations (29 CFR Part 5). Under 40 U.S.C. 3702 of the Act, each contractor must be required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work week is permissible provided that the worker is compensated at a rate of not less than one and a half times the basic rate of pay for all hours worked in excess of 40 hours in the work week. The requirements of 40 U.S.C. 3704 are applicable to construction work and provide that no laborer or mechanic must be required to work in surroundings or under working conditions which are unsanitary, hazardous or dangerous. These requirements do not apply to the purchases of supplies or materials or articles ordinarily available on the open market, or contracts for transportation or transmission of intelligence.
