Animal Feedlot definition

Animal Feedlot means a lot or building or combination of lots and buildings intended for the confined feeding, breeding, raising, or holding of animals and specifically designed as a confinement area in which manure may accumulate or where the concentration of animals is such that a vegetative cover cannot be maintained within the enclosures. For the purposes of this Permit, open lots used for the feeding and rearing of poultry (poultry ranges) shall be considered to be animal feedlots. Pastures shall not be considered animal feedlots under this Permit.
Animal Feedlot means a lot or building or combination of lots and buildings intended for the confined feeding, breeding, raising, or holding of animals and specifically designed as a confinement area in which manure may accumulate or where the concentration of animals is such that a vegetative cover cannot be maintained within the enclosures. For the purposes of this Permit, open lots used for the feeding and rearing of poultry (poultry ranges) shall be considered to be animal feedlots. Pastures shall not be considered animal feedlots under this Permit. [Minn. R.7020.0300] 18.7 "Animal Manure" or "Manure" means poultry, livestock, or other animal excreta or a mixture of excreta with feed, bedding, precipitation, or other materials. [Minn. R. 7020.0300] 18.8 "Application Materials or Permit Application" means all information submitted by the applicant for coverage under this permit and relied upon by the MPCA to make a decision on the request for permit coverage. This includes but is not limited to the application form, manure management plan, plans and specifications for facility components, emergency response plan, and required monitoring plans as approved by the MPCA. [Minn. R. 7001] 18.9 "Approved Plans or MPCA Approved" means any previously approved plans/documents or new/revised plans/documents required by this Permit that receive approval from the MPCA. [Minn. R. 7001] 18.10 "Best Management Practices" ("BMPs") means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the state. BMPs also include treatment requirements, operating procedures, and practices to control site runoff, spillage or leaks, sludge orwaste disposal, or drainage from raw material storage. [Minn. R. 7001] 18.11 "Closure" refers to the cessation of use of all or any part of the facility, including:
Animal Feedlot means a lot or building or combination of lots and buildings intended for the confined feeding, breeding, raising, or holding of animals and specifically designed as a confinement area in which manure may accumulate, or where the concentration of animals is such that a vegetative cover cannot be maintained within the enclosure. For purposes of these parts, open lots used for the feeding and rearing of poultry (poultry ranges) shall be considered to be animal feedlots. Pastures shall not be considered animal feedlots under these parts.

Examples of Animal Feedlot in a sentence

  • Definitions‌‌‌Appendix AThis Appendix contains the definitions of the terms used in this State of Minnesota Animal Feedlot Permit.

  • The Animal Feedlot Runoff Risk Index Worksheet (AFRRIW) will be used to estimate annual nutrient loading reductions for manure management systems planned and installed by the LP3 program.

  • DefinitionsAppendix AThis Appendix contains the definitions of the terms used in this State of Minnesota Animal Feedlot Permit.

  • The LP3 project will use the Animal Feedlot Runoff Risk Index Worksheet (Attachment 5) to estimate nitrogen and phosphorus load reductions resulting from the applied BMP.

  • In order to check the recyclability of the catalyst four reaction runs were carried out.

  • Definitions‌‌‌Appendix A This Appendix contains the definitions of the terms used in this State of Minnesota Animal Feedlot Permit.

  • Further analysis will need to be conducted for all candidate farms to identify farmers’ interests and determine specifically how farm operations could support an AD system.FindingsThe data for all 73 Animal Feedlot Operations (AFOs) in Johnson County were mapped using longitude and latitude according to type and size.

  • Definitions‌‌Appendix AThis Appendix contains the definitions of the terms used in this State of Minnesota Animal Feedlot Permit.

  • Some of the supplemental monitoring methods or tools that may be employed include: 1) STEPL or AnnAGNPS models; 2) Animal Feedlot Runoff Risk Index Worksheet; 3) tracking BMP type, location and amount; and 4) photo monitoring.

  • Primary models to be used include AnnAGNPS; STEPL; Decision Support Tools for the James and Wild Rice River basins; and the Animal Feedlot Runoff Risk Index Worksheet (AFRRIW).


More Definitions of Animal Feedlot

Animal Feedlot means a barnyard, exercise area, or other outdoor area where livestock are concentrated for feeding or other purposes and self-sustaining vegetative cover is not maintained. “Animal Feedlot” does not include a winter grazing area or a bare soil area such as a cattle lane or a supplemental feeding area located within a pasture, provided that the bare soil is not a significant source of pollution to waters of the state.
Animal Feedlot means a lot or building or combination of lots and buildings intended for the confined feeding, breeding, raising, or holding of animals and specifically designed as a confinement area in which manure may accumulate, or where the concentration of animals is such that a vegetative cover cannot be maintained within the enclosure. Pastures shall
Animal Feedlot means a lot or building or a group of lots or buildings intended for the confined feeding, breeding, raising, or holding of animals. It includes areas specifically designed for confinement in which manure may accumulate or any area where the concentration of animals is such that a vegetative cover cannot be maintained.

Related to Animal Feedlot

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Clean coal technology demonstration project means a project using funds appropriated under the heading “Department of Energy—Clean Coal Technology,” up to a total amount of $2,500,000,000 for commercial demonstration of clean coal technology, or similar projects funded through appropriations for the Environmental Protection Agency. The federal contribution for a qualifying project shall be at least 20 percent of the total cost of the demonstration project.

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.

  • Roomer means a person occupying a dwelling unit that lacks a major bathroom or kitchen facility, in a structure where one or more major facilities are used in common by occupants of the dwelling unit and other dwelling units. Major facility in the case of a bathroom means toilet, or either a bath or shower, and in the case of a kitchen means refrigerator, stove or sink.

  • Sewage sludge fee weight means the weight of sewage sludge, in dry U.S. tons, excluding admixtures such as liming materials or bulking agents. Annual sewage sludge fees, as per section 3745.11(Y) of the Ohio Revised Code, are based on the reported sludge fee weight for the most recent calendar year.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Total tetrahydrocannabinol means the same as that term is defined in § 3.2-4112.

  • Collaborative drug therapy management means participation by an authorized pharmacist and a physician in the management of drug therapy pursuant to a written community practice protocol or a written hospital practice protocol.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Brewery means a commercial enterprise at a single location producing more than fifty thousand (50,000) barrels per year of malt beverage;

  • Pupil fee means a fee, deposit or other charge imposed on pupils, or a pupil’s parents or guardians, in violation of Section 49011 of the Education Code and Section 5 of Article IX of the California Constitution, which require educational activities to be provided free of charge to all pupils without regard to their families’ ability or willingness to pay fees or request special waivers, as provided for in Hartzell v. Connell (1984) 35 Cal.3d 899. A pupil fee includes, but is not limited to, all of the following:

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per million.

  • Mistletoe Thinning means the removal of designated conifer trees bearing visible mistletoe plants on branches as well as visible plants or infections on the stem.

  • Radiation therapy simulation system means a radiographic or fluoroscopic x-ray system intended for localizing the volume to be exposed during radiation therapy and confirming the position and size of the therapeutic irradiation field.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Specified anatomical areas means and includes:

  • Cropland means land used for the production of adapted crops for harvest, alone or in a rotation with grasses and legumes, and includes row crops, small grain crops, hay crops, nursery crops, orchard crops, and other similar specialty crops.

  • Drug therapy management means the review of a drug therapy regimen of a patient by one or more pharmacists for the purpose of evaluating and rendering advice to one or more practitioners regarding adjustment of the regimen.

  • Ambulatory surgical center means any public or private State licensed and approved (whenever required by law) establishment with an organized medical staff of Physicians, with permanent facilities that are equipped and operated primarily for the purpose of performing Surgical Procedures, with continuous Physician services and registered professional nursing service whenever a patient is in the facility, and which does not provide service or other accommodations for patients to stay overnight.

  • Brewer means a person engaged in manufacturing:

  • Transit-oriented development means infrastructure improvements that are located within 1/2 mile of a transit station or transit-oriented facility that promotes transit ridership or passenger rail use as determined by the board and approved by the municipality in which it is located.

  • Subloop shall have the meaning set forth in Section 9.3.1.

  • Double check valve assembly means an assembly composed of two single, independently acting, check valves including tightly closing shutoff valves located at each end of the assembly and suitable connections for testing the water tightness of each check valve.

  • Cluster development means a contiguous cluster or

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.