Bumper test area definition

Bumper test area means the frontal surface of the bumper limited by two longitudinal vertical planes intersecting the corners of the bumper and moved 66 mm parallel and inboard of the corners of the bumpers.
Sample 1Sample 2Sample 3
Bumper test area means the frontal surface of the bumper limited by two longitudinal vertical planes intersecting the corners of the bumper and moved 66 mm parallel and inboard of the corners of the bumpers. either the front vehicle fascia between the left and right corner of bumper as defined in paragraph 3.14., minus the areas covered by the distance of 42 mm inboard of each corner of bumper, as measured horizontally and perpendicular to the longitudinal median plane of the vehicle, with this distance to be set from the most outboard point with a flexible tape held tautly along the outer surface of the vehicle, or between the outermost ends of the bumper beam as defined in paragraph 3.9. (see Figure 5D), minus the areas covered by the distance of 42 mm inboard of each end of the bumper beam, as measured horizontally and perpendicular to the longitudinal median plane of the vehicle, whichever area is wider."
Sample 1Sample 2Sample 3
Bumper test area means the frontal surface of the bumper limited by two longitudinal vertical planes intersecting the corners of the bumper and moved 66 mm parallel and inboard of the corners of the bumpers points 66 mm inside the defined corners of the bumper. This distance is to be set with a flexible tape held tautly along the outer surface of the vehicle."
Sample 1Sample 2

More Definitions of Bumper test area

Bumper test area means either the front vehicle fascia between the left and right corner of bumper as defined in paragraph 3.15., minus the areas covered by the distance of 42 mm inboard of each corner of bumper, as measured horizontally and perpendicular to the longitudinal median plane of the vehicle, or between the outermost ends of the bumper beam as defined in paragraph
Sample 1Sample 2
Bumper test area means either the front vehicle fascia between the left and right corner of bumper as defined in paragraph 2.17., minus the areas covered by the distance of 42 mm inboard of each corner of bumper as measured horizontally and perpendicular to the longitudinal median plane of the vehicle, or between the outermost ends of the bumper beam as defined in paragraph 2.12. (see Figure 5D), minus the areas covered by the distance of 42 mm inboard of each end of the bumper beam, as measured horizontally and perpendicular to the longitudinal median plane of the vehicle, whichever area is wider.
Sample 1Sample 2
Bumper test area means either the front vehicle fascia between the left and right corner of bumper as defined in paragraph 2.17., minus the areas covered by the distance of 42 mm inboard of each corner of bumper as measured horizontally and perpendicular to the longitudinal median plane of the vehicle, or between the outermost ends of the bumper beam as defined in paragraph 2.12. (see Figure 5D), minus the areas covered by the distance of 42 mm inboard of each end of the bumper beam, as measured horizontally and perpendicular to the longitudinal median plane of the vehicle, whichever area is wider." Former paragraphs 2.14. and 2.15., renumber as paragraphs 2.15. and 2.16. Former paragraph 2.16. (including Figure 5), renumber as paragraph 2.17. and amend to read:
Sample 1
Bumper test area means either the front vehicle fascia between the left and right corner of bumper as defined in paragraph 3.14., minus the areas covered by the distance of
Sample 1
Bumper test area means the frontal surface of the bumper limited by two longitudinal vertical planes intersecting the corners of the bumper and moved 66 mm parallel and inboard of the corners of the bumpers. Copied from gtr, § 3.10.
Sample 1

Related to Bumper test area

  • Cannabis testing facility means an entity registered by

  • Rubbing alcohol means any product containing isopropyl alcohol (also called isopropanol) or denatured ethanol and labeled for topical use, usually to decrease germs in minor cuts and scrapes, to relieve minor muscle aches, as a rubefacient, and for massage.

  • The Works/Project means the works to be executed or done under this contract.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Supplier of water means any person who owns or operates a public water system.

  • ILUA Area means the geographical area in relation to which the Framework ILUA applies, as specified in Schedule 2 of the Framework ILUA;

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Generator Forced Outage means an immediate reduction in output or capacity or removal from service, in whole or in part, of a generating unit by reason of an Emergency or threatened Emergency, unanticipated failure, or other cause beyond the control of the owner or operator of the facility, as specified in the relevant portions of the PJM Manuals. A reduction in output or removal from service of a generating unit in response to changes in market conditions shall not constitute a Generator Forced Outage.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Marijuana testing facility means an entity licensed to analyze and certify the safety and potency of marijuana.

  • Work area means a room or defined space in a workplace where hazardous chemicals are produced or used, and where employees are present.

  • Network Area means the 50 mile radius around the local school campus the Named Insured is attending.

  • mining areas means the areas delineated and coloured red on the Plan marked “A” initialled by or on behalf of the parties hereto for the purposes of identification;

  • movement area means that part of an aerodrome to be used for the take-off, landing and taxiing of aircraft, consisting of the manoeuvring area and the apron(s);

  • Work Site means the site where the Work is being performed.

  • Generator Operator means the Person that Operates the Generating Facility and performs the functions of supplying electric energy and interconnected operations services within the meaning of the NERC Reliability Standards.

  • mining area means all those pieces of land containing two hundred and forty‑six (246) square miles or thereabouts situate in what is known to the parties as the “Xxx Xxxxx‑Siberia Nickel Laterite Area” the subject of the mineral claims applications for mineral claims and Temporary Reserves listed in the First Schedule hereto which are generally delineated and respectively coloured green and orange and red in the plan marked “X” signed by or on behalf of the parties for the purpose of identification;

  • PAD means a Preauthorized Debit.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Host Site means the site at which the Site Host Load is consumed, including real property, facilities and equipment owned or operated by the Site Host or its Related Entities located at such site.

  • Passenger area means the area designed to seat the driver and passengers while a motor vehicle is in operation and any area that is readily accessible to the driver or a passenger while in his or her seating position, including but not limited to any type of glove or storage compartment accessible to passengers or driver.

  • Planning area means a planning area or a development area or a local planning area or a regional development plan area, by whatever name called, or any other area specified as such by the appropriate Government or any competent authority and includes any area designated by the appropriate Government or the competent authority to be a planning area for future planned development, under the law relating to Town and Country Planning for the time being in force and as revised from time to time;

  • Development Area means that area to which a development plan is applicable.