Corrected Capacity definition

Corrected Capacity means the most recent actual tested Capacity, in MW, corrected to Design Point Conditions (DPC) as described herein.
Sample 1Sample 2Sample 3
Corrected Capacity means Capacity adjusted to correspond to conditions of [Applicable weather conditions to be determined based on technology], as measured at the Delivery Point.
Sample 1Sample 2Sample 3
Corrected Capacity means the most recent actual tested Capacity, in MW, corrected to DPC using the procedures specified in the Capacity Test Procedures as described herein.
Sample 1

Examples of Corrected Capacity in a sentence

  • Furthermore, if - during a Vulnerability Period - there is an excess of the Performed Corrected Capacity Obligation over the Corrected Capacity Obligation (see comments below), it will be allowed to transfer such excess to another CMU in a form of the Relocation Volume based on ex post principle (i.e. after the Capacity Obligation has been performed in excess).

  • Furthermore, if - during an Emergency Period - there is an excess of the Performed Corrected Capacity Obligation over the Corrected Capacity Obligation (see comments below), it will be allowed to transfer such excess to another CMU in a form of the Relocation Volume based on ex post principle (i.e. after the Capacity Obligation has been performed in excess).

  • The Capacity Test shall determine the facility’s Corrected Capacity at the Design Point Conditions.

  • Corrected Capacity and Corrected Relative Humidity Equations‌ In the May 2014 NOPR, DOE proposed that product capacity be calculated in accordance with the test requirements specified in Section 7, “Capacity Test and Energy Consumption Test,” of ANSI/AHAM DH-1-2008, except that the standard test conditions would be maintained at 65 °F ± 2.0 °F dry-bulb temperature and 56.6 °F ± 1.0 °F wet-bulb temperature.

  • If the average Corrected Capacity is below the Guaranteed Capacity, however, the Company shall be entitled to damages.Within seventy-two (72) hours or agreed upon period following its completion of the Capacity Test, Supplier shall submit to Company for Company Review a preliminary report providing all of the data collected as well as its calculations to determine the average Corrected Capacity relative to the Guaranteed Capacity as described above.

  • Output calculations, methodology, correction factors that serve as the basis for the Corrected Capacity calculation, equations and procedures.

  • The baseline model contains 9 markers and the new model contains 5 more genes.

  • In the event that the Annual Capacity Test demonstrates that the Facility has a Corrected Capacity of less than the Guaranteed Capacity, Seller shall use Commercially Reasonable Efforts to restore the Facility to a Corrected Capacity at least equal to the Guaranteed Capacity.

  • Ambient air temperature at one (1) location within the array field – C (T) Once Supplier has recorded and logged data for all of the fifteen (15)-minute intervals, Supplier shall use such data to compare the Corrected Capacity of the Facility to the Guaranteed Capacity for each such interval.

  • If the average Corrected Capacity meets or exceeds the Guaranteed Capacity, then the Facility shall have satisfied the Capacity Test.

Related to Corrected Capacity

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • Excess Capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • RA Capacity means the maximum megawatt amount that the CAISO recognizes from a Project that qualifies for Buyer’s Resource Adequacy Requirements and is associated with the Project’s Capacity Attributes.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Final RTO Unforced Capacity Obligation means the capacity obligation for the PJM Region, determined in accordance with RAA, Schedule 8. Financial Close:

  • Additional Capacity means, in relation to the Network, the capability of the Network to carry additional task by an enhancement or improvement of the infrastructure forming part of the Network or Associated Facilities;

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Daily Unforced Capacity Obligation means the capacity obligation of a Load Serving Entity during the Delivery Year, determined in accordance with Reliability Assurance Agreement, Schedule 8, or, as to an FRR entity, in Reliability Assurance Agreement, Schedule 8.1. Day-ahead Congestion Price: “Day-ahead Congestion Price” shall mean the Congestion Price resulting from the Day-ahead Energy Market. Day-ahead Energy Market:

  • Available RP Capacity Amount means the amount of Restricted Payments that may be made at the time of determination pursuant to Sections 6.04(a)(ii)(D), (a)(vii) and (a)(x) minus the aggregate amount of the Available RP Capacity Amount utilized by the Borrower or any Restricted Subsidiary to (a) make Investments pursuant to Section 6.06(q)(ii), (b) make Restricted Debt Payments pursuant to Section 6.04(b)(iv)(B) or (c) incur Indebtedness pursuant to Section 6.01(ll).

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.