Covered Process Units definition

Covered Process Units means any process unit that is, or under the terms of this Consent Decree becomes, subject to the equipment leak provisions of 40 C.F.R. Part 60, Subpart GGGa.
Sample 1Sample 2Sample 3
Covered Process Units means the Phenol unit at the Mt. Vernon Facility, which comprises a “chemical manufacturing process unit” (as defined in 40 C.F.R.
Sample 1Sample 2
Covered Process Units means the unit that produces ETHOCEL ™ brand cellulose ethers (identified as EGB5) and the Low Gloss ABS Unit (identified as EG31).
Sample 1Sample 2

Examples of Covered Process Units in a sentence

  • Covered Types of Equipment shall be monitored in order to calculate a leak percentage for the Covered Process Units.

  • Beginning no later than 90 Days after the Effective Date of this Consent Decree, Aux Sable shall ensure that each valve, pump, and connector added to the Covered Process Units at the Facility for any reason is evaluated to determine if it is subject to LDAR regulations.

  • For descriptive purposes under this Section, the monitoring that takes place during an LDAR Audit shall be called “Comparative Monitoring,” and the leak percentages derived from the Comparative Monitoring shall be called the “Comparative Monitoring Audit Leak Percentages.” Aux Sable shall undertake Comparative Monitoring of the Covered Types of Equipment in the Covered Process Units during each LDAR Audit.

  • Aux Sable may elect to comply with the monitoring requirements of this Paragraph 22 at the Covered Process Units but may not make this election for anything less than all pieces of Covered Equipment in one entire Covered Process Unit.

  • Except as provided below, before each monitoring shift or before monitoring equipment is restarted during a monitoring shift, Settling Defendants shall calibrate LDAR monitoring equipment as required by Subpart GGGa in accordance with 40 C.F.R. Part 60, EPA Reference Test Method 21, prior to each time LDAR monitoring equipment is used to monitor Covered Process Units.

  • Settling Defendants shall utilize the following leak definitions in Paragraphs 87.a and 87.b below for valves and pumps in light liquid and/or gas/vapor service in Covered Process Units, unless other permit(s), regulations, or laws require the use of lower leak definitions.

  • Settling Defendants shall utilize a leak definition of 500 ppm VOCs for all of the valves in Covered Process Units.

  • To the extent not already done, beginning no later than six months after the Date of Lodging of this Consent Decree, Defendants shall ensure that each valve, connector, pump, agitator, and OEL added to the Covered Process Units at the Covered Facilities for any reason is evaluated to determine if it is subject to LDAR requirements.

  • Settling Defendants shall utilize a leak definition of 2,000 ppm VOCs for all of the pumps in Covered Process Units.

  • Beginning no later than three (3) Months after the Effective Date of this Consent Decree, INEOS shall evaluate each valve, connector, pump, agitator, and OEL that is added to the Covered Process Units for any reason to determine if it is subject to LDAR requirements.


More Definitions of Covered Process Units

Covered Process Units means all affected facilities (except compressors) that commenced construction, reconstruction or modification after January 20, 1984 within the meaning of 40 C.F.R. Part 60, Subpart KKK, at the Kalkaska Gas Plant North (or “KGPN”) located at the Covered Facility, which includes the following process units: cryogenic
Sample 1Sample 2
Covered Process Units means any Process Unit at the Facility that is, at the Date of Lodging, subject to, or, under the terms of this Consent Decree, becomes subject to 40 C.F.R. Part 60, Subpart OOOO, pursuant to Paragraph 12, including Areas 100 (Inlet Separation & Dehydration), 200 (Extraction), 300 (Ethane Recovery), 500 (Utilities & Flare), 600 (Fractionation Unit, including Butamer Isomerization Process & Merox Treatment Process), 700 (Product Storage, Distribution & Railcar Loading), and 900 (Inlet & Metering), except that the following Process Units shall not be considered Covered Process Units: (a) the fractionation unit constructed under Construction Permit No. 14120019 and known as Unit 600A, and (b) any Process Units installed at the Facility after the Date of Lodging.
Sample 1
Covered Process Units means any process unit subject to the equipment leak provisions of 40 C.F.R. Part 63, Subpart JJJ or Subpart H, which at the time of lodging of the Consent Decree includes only the Acetonitrile, Acrylonitrile, and Barex Process Units.
Sample 1
Covered Process Units means pharmaceutical process units at the Facility used for the production of Amoxicillin, Cephalexin, Cefadroxil, and Cefprozil.
Sample 1
Covered Process Units means the Resorcinol Production Process Unit and the Resorcinol-Based Resins Production Process Unit at the Facility.
Sample 1
Covered Process Units means those process units at the Facility that contain “Covered Equipment;”
Sample 1

Related to Covered Process Units

  • Process unit means equipment assembled for the extraction of natural gas liquids from field gas, the fractionation of the liquids into natural gas products, or other operations associated with processing natural gas products. A process unit can operate independently if supplied with sufficient feed or raw materials and sufficient storage facilities for the products.

  • Performance Target means the level of performance expected of the HSP in respect of a Performance Indicator or a Service Volume; “person or entity” includes any individual and any corporation, partnership, firm, joint venture or other single or collective form of organization under which business may be conducted;

  • Performance Indicator means a measure of HSP performance for which a Performance Target is set; technical specifications of specific Performance Indicators can be found in the MSAA Indicator Technical Specifications document;

  • Performance Measures means measures as described in Article 12 on which the performance goals are based and which are approved by the Company’s shareholders pursuant to this Plan in order to qualify Awards as Performance-Based Compensation.

  • Project Milestones means the project milestones set forth in Schedule-G;

  • Performance Period means the one or more periods of time, which may be of varying and overlapping durations, as the Committee may select, over which the attainment of one or more Performance Goals will be measured for the purpose of determining a Participant’s right to, and the payment of, a Performance-Based Award.