Detailed Engineering Study definition

Detailed Engineering Study means a detailed study of the System load within a Facility and specific activities, Measures and or Generation that can be implemented in order to reduce the electricity consumption in the Facility, meeting the minimum requirements as outlined in Exhibit C to the Program Rules;
Sample 1Sample 2Sample 3
Detailed Engineering Study means a detailed study of the consumption of electricity of a System within a Facility, or of a Facility, in order to assess and evaluate (a) Measures, or their implementation, that could give rise to Electricity Savings, or (b) if approved by the IESO, electricity generation by the Participant that could reduce the electricity consumption by a System within a Facility, or of a Facility, from a Distribution System.
Sample 1Sample 2Sample 3
Detailed Engineering Study means a study conducted with respect to the Facility in accordance with a Engineering Study Incentive Schedule, meeting the minimum requirements as outlined in the Incentive Schedule;
Sample 1

Examples of Detailed Engineering Study in a sentence

  • The Services to be provided to Client by SoCalGas shall consist of the following tasks to this agreement including (check all that apply ) as detailed in the applicable Exhibit: • Exhibit A – Interconnect Capacity Study ( ),• Exhibit A1 – Preliminary Engineering Study ( ),• Exhibit A2 – Detailed Engineering Study ( ),• Exhibit A3 – Detailed Engineering Study and Long Lead Materials Procurement ( ).

  • Interconnector may initiate a Blending Study request as part of the Interconnection Screening or a subsequent Preliminary or Detailed Engineering Study.

  • The Participant agrees to complete the Detailed Engineering Study and prepare a Draft Report and a Final Report as set out in Section 4 on the results of such Detailed Engineering Study in accordance with the Detailed Engineering Study Report Minimum Requirements and the Detailed Engineering Study SOW attached hereto in Schedule "B" and Schedule "C", respectively.

  • Any amendment should clearly indicate what part of the Detailed Engineering Study the amendment is intending to replace.

  • Utility urges the Company to retain the services of a third-party engineering construction firm or enter into a Detailed Engineering Study with Utility to develop a more accurate construction cost estimate for this specific project.

  • Because of the exclusions and limitations of this initial review, Utility does not recommend that the Company use the PES for any other purpose, including any substantive planning or other decisions regarding the cost or viability of its project, except to further evaluate Company’s project via a Utility Detailed Engineering Study.

  • Without limiting the generality of the foregoing, the Participant shall obtain the prior written approval of the IESO of the cost and scope of the Detailed Engineering Study.

  • The Participant shall, concurrently with the Draft Report (as defined below) submit to the IESO a certificate signed by the Participant's Company Representative showing the actual Eligible Costs incurred by the Participant to complete the Detailed Engineering Study and attaching all relevant receipts.

  • Justice Mosk wrote a very interesting concurring opinion indicating that a sentence of 111 years to life would constitute cruel and unusual punishment under either the United States or California constitutions.

  • Without limiting the generality of the foregoing, the Participant acknowledges that its participation in the Detailed Engineering Study Program hereunder is based on its own assessment of the Detailed Engineering Study Program and not on any reliance on anticipated or projected results, and that such participation may not result in the achievement of any Electricity Savings, which is expressly disclaimed by the Participant.


More Definitions of Detailed Engineering Study

Detailed Engineering Study means the IESO-designed under the IESO’s Process and System Upgrades designed to provide a Participant Incentive to a Participant for the purpose of obtaining a Detailed Engineering Study.
Sample 1
Detailed Engineering Study means a detailed study of the System load within a Facility and specific activities, Measures and, if applicable, Generation that can be implemented in order to reduce the electricity consumption in the Facility, as further described in Exhibit C – Detailed Engineering Study Minimum Requirements to these Program Rules;
Sample 1

Related to Detailed Engineering Study

  • Feasibility Study means the evaluation and analysis of the potential of a project, which aims at supporting the process of decision-making by objectively and rationally uncovering its strengths and weaknesses, opportunities and threats, as well as identifying the resources required to carry it through and ultimately its prospects for success;

  • conformity assessment body means a body that performs conformity assessment activities including calibration, testing, certification and inspection;

  • Initial Engineering Report means the engineering report concerning Oil and Gas Properties of Loan Parties dated as of June 30, 2016, prepared internally by the Borrower.

  • Phase II Trial means a clinical trial of a Licensed Product on patients, including possibly pharmacokinetic and dose ranging studies, the principal purposes of which are to make a preliminary determination that such Licensed Product is safe for its intended use and to obtain sufficient information about such Licensed Product’s efficacy to permit the design of further clinical trials, and generally consistent with 21 CFR §312.21(b), or its successor regulation, or the equivalent in any foreign country.

  • Project area budget means a multiyear projection of annual or cumulative

  • Phase I Study means a study in humans which provides for the first introduction into humans of a product, conducted in healthy volunteers or patients to obtain information on product safety, tolerability, pharmacological activity or pharmacokinetics, as more fully defined in 21 C.F.R. § 312.21(a) (or the non-United States equivalent thereof).

  • Phase II Study means a human clinical trial, for which the primary endpoints include a determination of dose ranges and/or a preliminary determination of efficacy in patients being studied as described in 21 C.F.R. § 312.21(b) (FDCA), as amended from time to time, and the foreign equivalent thereof.

  • Phase 2 Trial means a human clinical trial conducted on study subjects with the disease or condition being studied for the principal purpose of achieving a preliminary determination of efficacy or appropriate dosage ranges, as further described in 21 C.F.R. §312.21(b) (including any such clinical study in any country other than the United States).

  • Project Plan means the document to be developed by the Contractor and approved by WTL, based on the requirements of the Contract and the Preliminary Project Plan included in the Contractor’s bid. For the sake of clarity, the Agreed and Finalised Project Plan” refers to the version of the Project Plan submitted by the contractor after receiving the letter of Award and the same approved by WTL. The project plan may be changed/ modified during the course of the project. Should the Project Plan conflict with the provisions of the Contract in any way, the relevant provisions of the Contract, including any amendments, shall prevail.

  • Phase 1 means the phase of the ATP comprised of: (1) improvements to the State Street Substation; (2) construction of the Proposed Line; (3) the rebuilding of NYSEG’s existing Lines 971 and 000 xxxxx xx Xxxxxxxx Xxxx xx the NYSEG ROW to allow for construction of the Proposed Line as intended; (4) improvements to the Elbridge Substation to accept the Proposed Line; and (5) National Grid’s conveyance to NYSEG of the NYSEG Acquired ROW and such other land interests as contemplated by the Purchase and Sale Agreement.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • The Project Plan means the document to be developed by the Supplier and approved by the Purchaser, pursuant to GCC Clause 19, based on the requirements of the Contract and the Preliminary Project Plan included in the Supplier’s bid. The “Agreed and Finalized Project Plan” is the version of the Project Plan approved by the Purchaser, in accordance with GCC Clause 19.2. Should the Project Plan conflict with the Contract in any way, the relevant provisions of the Contract, including any amendments, shall prevail.

  • Independent Engineering Report means a report, in form and substance satisfactory to the Administrative Agent and each of the Lenders, prepared by an Independent Engineer, addressed to the Administrative Agent and the Lenders with respect to the Oil and Gas Properties owned by the Borrower or its Subsidiaries (or to be acquired by the Borrower or any of its Subsidiaries, as applicable) which are or are to be included in the Borrowing Base, which report shall (a) specify the location, quantity, and type of the estimated Proven Reserves attributable to such Oil and Gas Properties, (b) contain a projection of the rate of production of such Oil and Gas Properties, (c) contain an estimate of the net operating revenues to be derived from the production and sale of Hydrocarbons from such Proven Reserves based on product price and cost escalation assumptions specified by the Administrative Agent and the Lenders, and (d) contain such other information as is customarily obtained from and provided in such reports or is otherwise reasonably requested by the Administrative Agent or any Lender.

  • Phase 1 Study means a clinical study of a drug candidate in human patients with the primary objective of characterizing its safety, tolerability, and pharmacokinetics and identifying a recommended dose and regimen for future studies as described in 21 C.F.R. §312.21(a), or a comparable clinical study prescribed by the relevant Regulatory Authority in a country other than the United States. The drug candidate can be administered to patients as a single agent or in combination with other investigational or marketed agents.

  • Environmental impact statement means a detailed written statement as required by section 102(2)(C) of the Act.

  • Phase I Trial means a Clinical Trial, the principal purpose of which is preliminary determination of safety of an investigational product in healthy individuals or patients or that otherwise meets the requirements described in 21 C.F.R. §312.21(a), or similar Clinical Trial in a country other than the United States.

  • Development Report means a written account of Licensee’s progress under the Development Plan having at least the information specified on Appendix B to this Agreement, and shall be sent to the address specified on Appendix B.

  • conformity assessment means the process demonstrating whether the requirements of this Regulation relating to a device have been fulfilled;

  • Engineering Report means either an Independent Engineering Report or an Internal Engineering Report.

  • Project area plan means a written plan that, after its effective date, guides and controls the development within a project area.

  • Study means the investigation to be conducted in accordance with the Protocol.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • Phase III Study means a human clinical trial that is prospectively designed to demonstrate statistically whether a product is safe and effective for use in humans in a manner sufficient to obtain regulatory approval to market such product in patients having the disease or condition being studied as described in 21 C.F.R. § 312.21(c) (FDCA), as amended from time to time, and the foreign equivalent thereof.

  • Development Plan has the meaning set forth in Section 3.2.

  • System Impact Study means an assessment by the Transmission Provider of (i) the adequacy of the Transmission System to accommodate a Completed Application, an Interconnection Request or an Upgrade Request, (ii) whether any additional costs may be incurred in order to provide such transmission service or to accommodate an Interconnection Request, and (iii) with respect to an Interconnection Request, an estimated date that an Interconnection Customer’s Customer Facility can be interconnected with the Transmission System and an estimate of the Interconnection Customer’s cost responsibility for the interconnection; and (iv) with respect to an Upgrade Request, the estimated cost of the requested system upgrades or expansion, or of the cost of the system upgrades or expansion, necessary to provide the requested incremental rights. “System Protection Facilities” shall refer to the equipment required to protect (i) the Transmission System, other delivery systems and/or other generating systems connected to the Transmission System from faults or other electrical disturbance occurring at or on the Customer Facility, and (ii) the Customer Facility from faults or other electrical system disturbance occurring on the Transmission System or on other delivery systems and/or other generating systems to which the Transmission System is directly or indirectly connected. System Protection Facilities shall include such protective and regulating devices as are identified in the Applicable Technical Requirements and Standards or that are required by Applicable Laws and Regulations or other Applicable Standards, or as are otherwise necessary to protect personnel and equipment and to minimize deleterious effects to the Transmission System arising from the Customer Facility.

  • Development Budget has the meaning set forth in Section 3.1.