Erosion control practices definition

Erosion control practices means: a. The construction or installation, and maintenance, of such structures or devices as are necessary to carry to a suitable outlet from the site of any building housing four or more residential units, any commercial or industrial development or any publicly or privately owned recreational or service facility of any kind, not served by a central storm sewer system, any water which: (1) Would otherwise cause erosion in excess of the applicable soil loss limit; and (2) Does not carry nor constitute sewage, industrial waste, or other waste as defined by section 455B.171. b. The employment of temporary devices or structures, temporary seeding, fibre mats, plastic, straw, or other measures adequate to prevent erosion in excess of the applicable soil loss limits from the site of, or land directly affected by, the construction of any public or private street, road or highway, any residential, commercial, or industrial building or development, or any publicly or privately owned recreational or service facility of any kind, at all times prior to completion of such construction. c. The establishment and maintenance of vegetation upon the right-of-way of any completed portion of any public street, road, or highway, or the construction or installation thereon of structures or devices, or other measures adequate to prevent erosion from the right-of-way in excess of the applicable soil loss limits.

Examples of Erosion control practices in a sentence

  • Erosion control practices that are compromised as the result of construction activity shall be returned to their functioning state by the end of the current work day.

  • Erosion control practices must comply with the Minnesota Pollution Control Agency’s best management practices.

  • Erosion control practices shall be used to prevent re-suspension of ambient sediment within a receiving water, and shoreline erosion and streambed scour.

  • Erosion control practices shall be used to protect soil surfaces at discharge points and receiving waters.

  • Erosion control practices shall be used to R prevent re-suspension of ambient sediment within a receiving water, and shorelineIerosion and streambed scour.

  • Erosion control practices to be used for this project are shown on the drawings and are to conform to South Carolina Department of Health and Environmental Control regulations.

  • Erosion control practices, sediment control practices, and waterway crossing shall meet the design criteria set forth in the most recent version of the Alabama Handbook for Erosion Control, Sediment Control and Stormwater Management on Construction Sites and Urban Areas and shall be adequate to prevent transportation of sediment from the site to the satisfaction of the Town of Pike Road.

  • Erosion control practices can improve water quality by reducing non-point source pollution and improving habitat for aquatic species.

  • Erosion control practices, and sediment control practices, shall meet the design criteria set forth in the most recent version of the Alabama Handbook for Erosion and Sediment Control and shall be adequate to prevent transportation of sediment from the site to the satisfaction of the environmental programs manager or designee of the building official.

  • Erosion control practices shall be used to protect soil surfaces E at discharge points and receiving waters.

Related to Erosion control practices

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Prudent Electrical Practices means those practices, methods and acts that would be implemented and followed by prudent operators of electric energy generating facilities in the Western United States, similar to the Facility, during the relevant time period, which practices, methods and acts, in the exercise of prudent and responsible professional judgment in the light of the facts known at the time the decision was made, could reasonably have been expected to accomplish the desired result consistent with good business practices, reliability and safety. Prudent Electrical Practices shall include, at a minimum, those professionally responsible practices, methods and acts described in the preceding sentence that comply with manufacturers’ warranties, restrictions in this Agreement, and the requirements of Governmental Authorities, WECC standards, the CAISO and Laws. Prudent Electrical Practices also includes taking reasonable steps to ensure that:

  • Pollution control facilities means water and air pollution control equipment and solid waste disposal facilities or any of them.

  • Best management practices (BMP) means schedules of activities, prohibitions of practices, maintenance procedures, and other management practices to prevent or reduce the pollution of waters of the United States. BMPs include treatment requirements, operation procedures, and practices to control plant site runoff, spillage or leaks, sludge or waste disposal, or drainage from raw material storage.

  • Proper practices means those set out in The Practitioners’ Guide

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • Critical control point means a point, step, or procedure in a food proc- ess at which control can be applied, and a food safety hazard can as a result be prevented, eliminated, or reduced to acceptable levels.

  • Hospital practice protocol means a written plan, policy, procedure, or agreement that authorizes drug therapy management between hospital pharmacists and physicians within a hospital and the hospital’s clinics as developed and determined by the hospital’s P&T committee. Such a protocol may apply to all pharmacists and physicians at a hospital or the hospital’s clinics or only to those pharmacists and physicians who are specifically recognized. A hospital practice protocol shall comply with the requirements of subrule 8.34(3).