Existing installation means an installation, construction of which began prior to the effective date of any regulation having application to it.
Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.
Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.
Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;
Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,
Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).
Approximate original contour means that surface configuration achieved by backfilling and grading of the mined area so that the reclaimed area, including any terracing or access roads, closely resembles the general surface configuration of the land prior to mining and blends into and complements the drainage pattern of the surrounding terrain, with all highwalls and spoil piles eliminated. Water impoundments may be permitted where the board determines that they are in compliance with section 34-33-120 (2)(h).
water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;
Lending Installation means, with respect to a Lender or the Administrative Agent, the office or branch of such Lender or the Administrative Agent listed on the signature pages hereof, on a Schedule, in an Assumption Agreement or otherwise selected by such Lender or the Administrative Agent pursuant to Section 2.17.
New installation means an installation, construction of which began after the effective date of any regulation having application to it.
Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:
meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;
Customer Premises Equipment or "CPE" means equipment employed on the premises of a Person other than a Carrier to originate, route or terminate Telecommunications (e.g., a telephone, PBX, modem pool, etc.).
Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.
Utility Installation means carpeting, window and wall coverings, power panels, electrical distribution systems, lighting fixtures, air conditioning, plumbing, and telephone and telecommunication wiring and equipment. At the expiration of the term, Lessor may require the removal of any or all of said alterations, improvements, additions or Utility Installations, and the restoration of the Premises and the Office Building Project to their prior condition, at Lessee's expense. Should Lessor permit Lessee to make its own alterations, improvements, additions or Utility Installations, Lessee shall use only such contractor as has been expressly approved by Lessor, and Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, or use a contractor not expressly approved by Lessor, Lessor may, at any time during the term of this Lease, require that Lessee remove any part or all of the same.
Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.
Customer’s Installation means an Electrical Installation and includes Distributed Generation, if Distributed Generation is connected to a Customer's Installation; "Customer’s Premises" means the land and buildings owned or occupied by a Customer, and any land over which the Customer has an easement or right to pass electricity, including:
Specialty Alterations means Alterations consisting of kitchens, executive bathrooms, raised computer floors, computer installations, vaults, libraries, internal staircases, dumbwaiters, pneumatic tubes, vertical and horizontal transportation systems, and other Alterations of a similar character.
Replacement Equipment means operational equipment or other parts used by Tenant to replace any of the Equipment.
Installation Site means the site at which the Product is originally installed.
Improvement warranty period means a period:
New equipment means equipment for which, by the cut-off date, neither of the following events has occurred:
Original Pool Balance means the Pool Balance as of the Cutoff Date.
drainage installation means a system situated on any premises and vested in the owner thereof and is used for or intended to be used for or in connection with the reception, storage, treatment or conveyance of sewage on that premises to the connecting point and includes drains, fittings, appliances, septic tanks, conservancy tanks, pit latrines and private pumping installations forming part of or ancillary to such systems;
Planned special exposure means an infrequent exposure to radiation, separate from and in addition to the annual occupational dose limits.
Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.