Gross Nameplate Capacity definition

Gross Nameplate Capacity means the total gross generating capacity of a generator or a generating facility (as defined in SCE’s Rule 21) as designated by the manufacturer(s) of the generator or generating facility.
Sample 1Sample 2Sample 3
Gross Nameplate Capacity means the manufacturer’s total installed rated capacity of the generating equipment to generate electricity.
Sample 1Sample 2Sample 3
Gross Nameplate Capacity means the manufacturer’s total installed rated capacity of the Project to generate Energy Output expressed in Direct Current (DC) and as set forth in the Cover Sheet to this Agreement.
Sample 1Sample 2Sample 3

Examples of Gross Nameplate Capacity in a sentence

  • Annual Supply Guarantee: ASG = MEQ x [(AH - EH) / AH] Where: ASG = Annual Supply Guarantee MEQ = Minimum Energy Quantity Where: MEQ = 0.1 x GNC x AH GNC = Gross Nameplate Capacity (in kW Direct Current or DC) AH = total number of Hours in each Delivery Period EH = total number of Excused Hours, as defined under Section 10.2 of the Agreement to which this Exhibit B is attached.

  • If the Generator’s Gross Nameplate Capacity is 10 MW or greater, SCE may request additional data to better model the nature and behavior of the Generator with relation to its Distribution System.Short Circuit Current Produced by GeneratorPlease indicate the current each Generator can supply to a three- phase fault across its output terminals.

  • If the Generator’s Gross Nameplate Capacity is 10 MW or greater, SVP may request additional data to better model the nature and behavior of the Generator with relation toits Distribution and subtransmission system.QShort Circuit Current Produced by GeneratorPlease indicate the current each Generator can supply to a three-phase fault across its output terminals.

  • Gross Nameplate Rating; Gross Nameplate Capacity: The total gross generating capacity of a Generator or Generating Facility as designated by the manufacturer(s) of the Generator(s).

  • SCE shall have the right to verify that the customer’s designated Standby Demand does not exceed the Gross Nameplate Capacity of the customer’s generating facility.

  • The level of Standby Demand shall be designated by the customer and shall be less than or equal to the Gross Nameplate Capacity of the customer’s generating facility.

  • If the Generator’s Gross Nameplate Capacity is 10 MW or greater, SCE may request additional data to better model the nature and behavior of the Generator with relation to its Distribution System.For Induction Generators Only:If the Generator is of an “induction” design, please provide the “locked rotor current” value supplied by the manufacturer.

  • An Applicant must provide, with its Application, a certified check, bank draft, or money order, payable to the Tennessee Valley Authority, in an amount that includes an application fee of $1,000 plus $1.00 per kW DC of the proposed Gross Nameplate Capacity (the “Application Fee”).

  • If the Generator’s Gross Nameplate Capacity is 10 MW or greater, SVP may request additional data to better model the nature and behavior of the Generator with relation to its Distributionand subtransmission system.PFor Induction Generators Only:If the Generator is of an “induction” design, please provide the “locked rotor current” value supplied by the manufacturer.

  • The longest time since visiting a dentist was reported by one participant to be over 20 years.


More Definitions of Gross Nameplate Capacity

Gross Nameplate Capacity means the manufacturer’s total installed rated capacity of the Facility to generate Energy Output expressed in Direct Current (DC).
Sample 1Sample 2Sample 3
Gross Nameplate Capacity means the manufacturer’s total installed rated capacity of the generating equipment to generate electricity. “HHV” means Higher Heating Value or the amount of heat produced by the complete combustion of a unit quantity of fuel.
Sample 1Sample 2Sample 3
Gross Nameplate Capacity means the manufacturer’s total installed rated
Sample 1

Related to Gross Nameplate Capacity

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Nameplate Capacity Rating means the maximum capacity of the Facility as stated by the manufacturer, expressed in kW, which shall not exceed 10,000 kW.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;