Minor Revisions definition

Minor Revisions means the proposed minor revisions suggested by the Purchaser to the Plant Design and / or, as the case may be, to the Premises Modification Statement, if any, as submitted by the Seller and which do not materially affect the nature, scope, schedule and / or cost of the Plant Installation as contemplated under this Agreement.
Sample 1Sample 2Sample 3
Minor Revisions. The following shall be considered Minor Revisions, subject to Type II Review: a. Access points of any LUA provided the resulting site plan or subdivision proposal is consistent with the Full Site Utilization Plan; b. New buildings, so long as the additional development can be accommodated with only minor changes to the transportation, water, sewer, storm drainage systems, or the Full Site Utilization Plan, in the approved Master Plan; c. Significant changes to street locations or capacity, as determined by the Planning Director; d. Approval of development and design standard variations in excess of the variations allowed by applicable VMC; and e. Any other changes that are not Major Revisions, that the Planning Director or Parks and Recreation Director, regarding changes to the Forested Tract, determines are not de minimis.
Sample 1Sample 2
Minor Revisions are updates to the Data Set provided by Iron Mountain as part of the Subscription that do not qualify as Major Revisions.
Sample 1Sample 2

Examples of Minor Revisions in a sentence

  • The Joint Board’s review of, comments on and approval, conditional approval or disapproval of System Documentation submitted by TSP shall be based only on (i) the Configuration Work requirements set forth in the Technical Requirements and approved Plans, (ii) statutory and regulatory non-discretionary standards relating to public health, safety and welfare, or (iii) Minor Revisions.

  • Upon completion of a review (see Section 2-3.3), the applicable approval procedure below shall be followed.a. Minor Revisions.

  • Minor Revisions: The proposal is passed pending minor revisions, which must be approved by the Faculty Advisor and any committee member wishing to review such changes.

  • Miscellaneous Minor Revisions: The proposed amendments also include several more minor changes.

  • Note: Minor Revisions are defined by the UCC as course name changes, course number changes, or updating or rewording a course’s catalog description in a way that does not significantly alter the nature of a course’s content.

  • At least one face-to-face meeting is recommended.First day of 5th semesterSubmit written prelim proposal to committee.Meet with committee to receive feedback and make revisions.During 5th semesterFollowing committee approval of revised proposal, work on prelim paper through fall and into winter break.Jan 31Prelim paper due to committee.Last day of FebCommittee grade due: Pass, Minor Revisions, Major Revisions, Fail.Mar 31Revisions (if required) due to committee.April 31Committee’s final grade due.

  • The following decisions are open to the Examining Committee: - MRP Project (Screening or Exhibition) and Oral Examination: Satisfactory, Unsatisfactory - Project Paper: Accept, Minor Revisions, Major Revisions, Fail.

  • Recent renovation, which included building improvements sufficient for obtaining a Certificate of Occupancy, were estimated to be $20-$30 million.

  • The revision attribute consists of Major and Minor Revisions and they are typically displayed as major.minor.bMajorRevUINT81-127(default 1)Second part of the revision.

  • Minor Revisions The FHWA [State name] Division Office and the [State name DOT/STA abbreviation] may make minor revisions to this Agreement without an amendment.


More Definitions of Minor Revisions

Minor Revisions means an update or upgrade to the Comtrac System which Comtrac considers to do any of the following;• Improve or add to the functionality of the Comtrac System in a minor way; or • Add a new module to the Comtrac System which adds only a minor function to the Comtrac System.
Sample 1
Minor Revisions. The client reviews the polished schema and requests minor revisions (placement, color, etc.).
Sample 1

Related to Minor Revisions

  • Permit revision means any permit modification or administrative permit amendment.

  • Implementation Schedule means the Implementation Schedule in Section VII of the tendering documents.

  • Procedures Manual means the standards and procedures manual described in Section 11.3.

  • Tool means the tool developed in accordance with Section 35A-15-303.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • MERS Procedures Manual The MERS Procedures Manual, as it may be amended, supplemented or otherwise modified from time to time.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Construction Change Directive means a written order prepared by Owner Parties and signed by Owner directing Contractor to perform a change in the Work prior to agreeing to a change, if any, to the Contract Time, schedule of performance of the Work, Contract Sum, or Contractor’s compensation.

  • Progress Schedule means a schedule of the Work, in a form satisfactory to Owner, as further set forth in Section 3.02.

  • Contract Schedule The list (as such list may be amended from time to time) identifying each Contract constituting part of the corpus of the Trust Fund as of the Cut-off Date, and which (a) identifies each Contract as either a Fixed Rate Contract or Adjustable Rate Contract and by contract number and name and address of the Obligor and (b) sets forth as to each Contract (i) the unpaid principal balance as of the related Transfer Date determined by giving effect to payments received prior to the related Transfer Date, (ii) the amount of each scheduled payment due from the Obligor, and (iii) the APR.

  • Major Decision Reporting Package With respect to any Major Decision, (a) a written report prepared by the Special Servicer describing in reasonable detail (i) the background and circumstances requiring action of the Special Servicer, (ii) the proposed course of action recommended, and (iii) information regarding any direct or indirect conflict of interest in the subject action, and (b) all information in the Special Servicer’s possession that is reasonably requested by the party receiving such Major Decision Reporting Package in order for such party to exercise any consultation or consent rights available to such party under this Agreement.

  • Multiregional Modeling Working Group or “MMWG” shall mean the NERC working group that is charged with multi-regional modeling.

  • Architectural Review Committee or “ARC” shall mean the architectural review committee established by the Organization to review plans submitted to the Organization for architectural review.

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Application Programming Interface or “API” means the application programming interface materials and related documentation containing all data and information to allow skilled Software developers to create Software interfaces that interface or interact with other specified Software.

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time. The Contract Specifications appear on the Website.

  • Review Package A package of documents consisting of a memorandum outlining the analysis and recommendation (in accordance with the Servicing Standard) of the Master Servicer or the Special Servicer, as the case may be, with respect to the matters that are the subject thereof, and copies of all relevant documentation.

  • Construction Schedule means a construction schedule indicating the planned start and completion dates of the major activities of the Work as set out in Appendix [ ], a future Appendix;

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • Work package means a major sub-division of the proposed project.

  • Unilateral Change Order (ULCO means a Change Order issued by Owner without the complete agreement of Contractor, as to cost and/or time.

  • Development Schedule shall have the meaning set forth in Section 1.1.

  • Interfaces means, collectively, the CAD Interface and the Channel Access Interface.

  • Customizations means those features, functions, interfaces or other aspects of the Contractor Customized Software that have been specifically developed or customized for District. Contractor Customized Software will include any and all bug fixes and other nonmaterial revisions to Contractor Customized Software, regardless of whether District has funded such bug fixes or other revisions.

  • Training Plan means the plan that outlines what training and assessment will be conducted off-the-job and what will be conducted on-the-job and how the Registered Training Organisation will assist in ensuring the integrity of both aspects of the training and assessment process.

  • Design-build team means an entity that consists of: