Mixed Pallet definition

Mixed Pallet means multiple SKU’s of more than one Product stored on a pallet
Sample 1Sample 2Sample 3
Mixed Pallet means multiple SKU's of more than one Product stored on a pallet "SKU" or "Stock Keeping Unit" shall mean a single sellable unit of a Product. Space Allocation Ingram shall allocate 20 bin locations at the listed Facility to be determined by Ingram. Product may be stored and picked as a Full Pallet, Casepack, Casepack Multipack, or individual SKU. Conveyable Standards The outside dimensions of all Product packaging shall be within the following maximum sizes: Maximum (inches): Length (34) x Width (34) x Height (34) [*** Confidential Treatment Requested] Fees Set-Up Fee. Vendor shall pay Ingram a one-time charge of $1500 to cover the cost of setting up Product sku's and catalog listings for up to twenty-five Product sku�s. The set-up fee is to be paid via check in advance of setup. Ingram will set up additional Product sku's in excess of ten sku's at a cost of $500 per block of twenty-five sku�s. Monthly Maintenance Fee. Beginning in the first month after the date that the Agreement is executed by Vendor or the date when the Products are first delivered to Ingram (whichever occurs first), Vendor shall pay Ingram $1000 as a monthly maintenance charge for each block of ten sku's (or part thereof). Such maintenance charge shall be paid by check in advance on or before the first day of each month for the continuation of Agreement. For each additional block of twenty-five sku's set up, Vendor shall be entitled to fifty additional bin locations and 125 additional Casepacks receipts per month. An additional charge of $500 per month will be assessed on Product sku's that do not comply with the conveyable Standards (up to a maximum of five sku�s). Additional Bin Location Fee. In the event Vendor uses more than the number of bin locations allocated above, Vendor shall pay $1.75 per additional bin per day for each additional bin location used. Bin sizes may varying according to location and product type. Each bin location may or may not be filled entirely depending on the type, size, weight and number of Products units.
Sample 1
Mixed Pallet means multiple SKUs stored on a pallet.
Sample 1

Examples of Mixed Pallet in a sentence

  • Multiple locations should NEVER be placed on the same skid unless authorized by SCS or buyer. Skids containing more than one part number must be identified as mixed labeled as a “mixed” palled and include a Mixed Pallet Manifest (Doc XXX).

  • Each mixed pallet has to be marked on all four (4) sides with the label: Mixed Pallet.

  • Multiple locations should NEVER be placed on the same skid unless authorized by SCS or buyer.• Skids containing more than one-part number must be identified as mixed labeled as a “mixed” palled and include a Mixed Pallet Manifest (Doc XXX).

  • This will also help place the label on the corresponding pallet or carton. Mixed Pallet – This field should read “MIXED” and not contain a SKU number.

  • Illustration: Mixed Pallet In each case, the packages must be stacked in such a way that each package’s complete labeling (incl.

  • Ein Jahr, das uns alle viel Kraft gekostet/ Master Mixed Pallet: Unites what belongs togetherCONTENT/ Digital replaces face-to-face/ Getting better together/ Austria and UK impress in the areas of quality and shipment development/ Road transport still of fundamental importance during Covid-19/ Ready, steady, go!/ Preparation for export shipments to UK as of 1st January 2021are automatically allocated to all parcels on the Master Mixed Pallet that belong to each other.

  • The re-construction works will be done within the same locations on which the existing buildings stand in the village common lands, and will constitute (a) dismantling some portions of the damaged buildings, and (b) re-construction of the buildings.

  • Illustration 11: Mixed Pallet In each case, the packages must be stacked in such a way that each package’s complete labeling (incl.

  • Multiple locations should NEVER be placed on the same skid unless authorized by SCS or buyer.▪ Skids containing more than one part number must be identified as mixed labeled as a “mixed” palled and include a Mixed Pallet Manifest.▪ Packing List must be clearly visible on the outside of the skid.

  • Under the Description and Justification, select the name of the consultant and enter in the description of consultant’s role (maximum of 500 characters) and justification for use of the consultant (maximum of 500 characters) for each item.

Related to Mixed Pallet

  • embedded generator means a generator who is not a market participant and whose generation facility is connected to a distribution system of a distributor, but does not include a generator who consumes more electricity than it generates;

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Residual Metered Load means all load remaining in an electric distribution company’s fully metered franchise area(s) or service territory(ies) after all nodally priced load of entities serving load in such area(s) or territory(ies) has been carved out.

  • Flex fuel vehicle means a vehicle with one fuel storage system that can run on different mixtures of two or more fuels.

  • Model 4 seller means a seller that is registered under the agreement and is not a model 1 seller, model 2 seller, or model 3 seller.

  • Alternative fuel vehicle means a vehicle designed to be capable of running on at least one type of fuel that is either gaseous at atmospheric temperature and pressure, or substantially non-mineral oil derived.

  • Sub-meter means a metering point for electricity consumption that does not include all electricity consumption for the end-use customer as defined by the electric distribution company account number. PJM shall only accept sub-meter load data from end-use customers for measurement and verification of Regulation service as set forth in the Economic Load Response rules and PJM Manuals.

  • Bi-fuel vehicle means a vehicle with two separate fuel storage systems that can run part-time on two different fuels and is designed to run on only one fuel at a time;

  • Fuel burning equipment means any furnace, boiler, apparatus, stack and all associated equipment, used in the process of burning fuel.

  • Transport vehicle means a motor vehicle or rail car used for the transportation of cargo by any mode. Each cargo-carrying body (trailer, railroad freight car, etc.) is a separate transport vehicle.

  • mixed supply means two or more individual supplies of goods or services, or any combination thereof, made in conjunction with each other by a taxable person for a single price where such supply does not constitute a composite supply.

  • Mixed beverage or "mixed alcoholic beverage" means a drink composed in whole or in part of

  • Transit Passenger means a passenger who arrives at the airport in an aircraft and departs from the airport in the same aircraft, where such an aircraft is operating a through flight transiting the airport, and includes a passenger in transit through the airport who has to depart in a substituted aircraft because the aircraft on which the passenger arrived has been declared unserviceable.

  • SFTR means Regulation (EU) 2015/2365 of the European Parliament and of the Council of 25 November 2015 on transparency of securities financing transactions and of reuse and amending Regulation (EU) No 648/2012;

  • Basket Componenti means the respective share as specified in § 1 of the Product and Underlying Data.

  • Stinger-steered automobile or watercraft transporter means an automobile or watercraft transporter

  • Customer-generator means a user of a net metering system.

  • Model 2 seller means a seller registered under the agreement that:

  • Model 1 seller means a seller registered under the agreement that has selected a certified service provider as the seller's agent to perform all of the seller's sales and use tax functions for agreement sales and use taxes other than the seller's obligation under Section 59-12-124 to remit a tax on the seller's own purchases.

  • Residual disinfectant concentration (“C” in CT cal- culations) means the concentration of disinfectant measured in mg/l in a representative sample of water.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Base Load Generation Resource means a Generation Capacity Resource that operates at least 90 percent of the hours that it is available to operate, as determined by the Office of the Interconnection in accordance with the PJM Manuals.

  • Distribution center means a building or structure used primarily for the storage of goods which are intended for subsequent shipment to retail outlets. Distribution center does not mean a building or structure used primarily to store raw agricultural products, used primarily by a manufacturer to store goods to be used in the manufacturing process, used primarily for the storage of petroleum products, or used for the retail sale of goods.

  • Compression ignition engine means an internal combustion engine with operating characteristics significantly similar to the theoretical diesel combustion cycle. The regulation of power by controlling fuel supply in lieu of a throttle is indicative of a compression ignition engine.

  • Excess Concentration means, without duplication, the sum of the following amounts:

  • Unmanned aerial vehicle ("UAV") (9) means any aircraft capable of initiating flight and sustaining controlled flight and navigation without any human presence on board.