Mold and Mildew definition

Mold and Mildew. Tenants acknowledge that the rental unit is located in Florida, which has a climate conducive to the growth of mold and mildew, and that it is necessary to provide proper ventilation and dehumidification of the premises to retard and prevent the growth of mold and mildew. Tenants agree to be responsible for properly ventilating and dehumidifying the premises and contents to retard and prevent the growth of mold and mildew and that the Landlord will not be responsible for damage to the premises or the personal property of the tenants for damages caused by mold and mildew.
Sample 1
Mold and Mildew. The General Manager will provide a list of rooms that need attention and identify an authorized "knock-down" contractor. Due to the uncertainty of the extent of the problem, we agreed an allowance of $13,500 ($450 x 30 rooms) was fair. In addition, second floor walkways have been rechalked by the maintenance staff along the building seam to prevent water, if any, from penetrating from that location.
Sample 1
Mold and Mildew. You acknowledge that it is necessary for you to maintain appropriate climate control, keep all doors and windows closed during rain and snow, keep your dwelling unit clean, and take necessary measure to retard and prevent mild from accumulating in the dwelling unit. You agree to clean and dust the dwelling unit on a regular basis and to remove visible moisture accumulation on the windows, window sills, walls, floors, and other surfaces as soon as reasonably possible. You agree not to block or cover any heating, ventilation or air- conditioning ducts. You must also agree to report immediately in writing to us: (a) any evidence of a water leak or excessive moisture in the dwelling unit, storage room, garage, or any other common area; (b) any evidence of mold that cannot be removed with a household cleaner; (c) any failure or malfunction in heating, ventilation or air conditioning, and (d) any inoperable doors and windows. Liability for Damages, Injuries, Personal Property, and Cleaning: You further agree that you shall be responsible for damages to the dwelling unit and your personal property as well as injury to you and all occupants of the dwelling unit resulting from your failure to comply with the terms of this Mold Addendum. Violation of Addendum: Violation of this Addendum shall be deemed a material Non- Compliance under the terms of the Lease, and Owner shall be entitled to excise all rights and remedies it possesses against resident at law or equity. General: This Mold Addendum is considered part of the Lease Contract described above. In the event of any conflict between the terms of this Mold Addendum and the terms of the Lease Contract, the terms of this Mold Addendum shall control. Each tenant who signed the Lease Contract, the terms of this Mild Addendum shall control. Each tenant who signed the Lease Contract must sign this Mold Addendum. Each tenant is jointly and severally liable for damages and all other obligations set forth in this Mold Addendum. This Mold Addendum is a legally binding contract. Read carefully before signing. Date Tenant Date Agent for Owner
Sample 1

Examples of Mold and Mildew in a sentence

  • Mold and Mildew: Materials that have evidence of growth of molds or of mildew are not acceptable, including both stored and installed materials; immediately remove from site.

  • Airborne Mold and Mildew: Measure in relation to outside air, at air intake, but in no case less then 48 inches above finish grade; not more then outside air.

  • But I thought the probability of us achieving the PlanReview of Operations Nozaki When you became the President of Shinsei Bank, I was actually wondering what would happen because all your prede- cessors had had a “western flavor,” while you have a “Japanese flavor.” Since your appointment, though, you have implemented various measures and I think that you have created a solid man- agement base.

  • Mold and Mildew Growth Resistance of Basement Specialty Coatings shall be determined by ASTM D3273-12, “Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber”, and ASTM D3274-09(2013), “Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Microbial (fungal or algal) Growth, or Soil and Dirt Accumulation”.

  • Subgrantees and contractors will be checked at least annually for compliance with certification requirements such as QCI, Lead Safe, OSHA 10 (required within 60 days of hire for crew members), OSHA Confined Space for Construction and Weatherization Related Mold and Mildew training.

  • Mold and Mildew Resistance: Provide firestoppping materials with mold and mildew resistance rating of zero(0) in accordance with ASTM G21.

  • Coating must be resistant to mold and mildew growth and must achieve a microbial growth rating of 8 or more, as determined in accordance with ASTM D3273-00 and ASTM D3274-95, incorporated by reference in Section 215.7E.18 Mold and Mildew Growth for Basement Specialty Coatings.

  • Mold and Mildew PreventionThere are several measures that you can take to reduce moisture build up in your Apartment and to discourage the growth of mold and mildew.

  • Since the asset mapping is a dynamic process with frequent changes it is not published in this plan.Appendix I: How to Best Deal with Mold and Mildew after a Hurricane / FloodHomeowner and Volunteer GuidanceAfter many years of dealing with the aftermath of storms we have learned some valuable lessons about mold removal and prevention.

  • Airborne Mold and Mildew: Measure in relation to outside air; not higher than outside air.

Related to Mold and Mildew

  • Mold means mold, fungus, microbial contamination or pathogenic organisms.

  • Wild animals means those species of the class Mammalia whose

  • Contaminated soil means soil that meets all of the following criteria:

  • Inert ingredient means an ingredient which is not an active ingredient.

  • Wild animal means any mammal, bird, fish, or other creature of a wild nature endowed with sensation and the power of voluntary motion.

  • Microorganisms (1 2) means bacteria, viruses, mycoplasms, rickettsiae, chlamydiae or fungi, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material including living material which has been deliberately inoculated or contaminated with such cultures.

  • Dangerous dog means a dog that:

  • Radioactive Products or Waste means any radioactive material produced in, or any material made radioactive by exposure to the radiation incidental to the production or utilization of nuclear fuel, but does not include radioisotopes which have reached the final stage of fabrication so as to be usable for any scientific, medical, agricultural, commercial or industrial purpose.

  • Riprap means small, broken stones or boulders placed compactly or irregularly on dykes or similar embankments for protection of earth surfaces against wave action or current;

  • Universal waste transporter means a person engaged in the off-site transportation of universal waste by air, rail, highway, or water.

  • Dangerous Substances means a substance or article described in regulation 3 of the Dangerous Substances Regulations;

  • Contamination means the presence of, or Release on, under, from or to the environment of any Hazardous Substance, except the routine storage and use of Hazardous Substances from time to time in the ordinary course of business, in compliance with Environmental Laws and with good commercial practice.

  • Cannabinoid edible means food or potable liquid into which a cannabinoid concentrate, cannabinoid extract or dried marijuana leaves or flowers have been incorporated.

  • Topsoil means a varying depth (up to 300 mm) of the soil profile irrespective of the fertility, appearance, structure, agricultural potential, fertility and composition of the soil;

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Counterfeit substance means a controlled substance which, or the container or labeling of which, without authorization, bears the trademark, trade name, or other identifying mark, imprint, number or device, or any likeness thereof, of a manufacturer, distributor, or dispenser other than the person who in fact manufactured, distributed, or dispensed the substance.

  • Bioassay means the determination of kinds, quantities or concentrations and, in some cases, the locations of radioactive material in the human body, whether by direct measurement, in vivo counting, or by analysis and evaluation of materials excreted or removed from the human body. For purposes of these rules, “radiobioassay” is an equivalent term.

  • Biological agent shall mean any pathogenic (disease producing) micro-organism(s) and/or biologically produced toxin(s) (including genetically modified organisms and chemically synthesized toxins) which cause illness and/or death in humans, animals or plants.

  • Precursor means any chemical reactant which takes part at any stage in the production by whatever method of a toxic chemical. This includes any key component of a binary or multicomponent chemical system.

  • Contaminated site means a site where there is a confirmed presence, caused by man, of hazardous substances of such a level that they pose a significant risk to human health or the environment taking into account current and approved future use of the land;

  • Contaminated means the actual existence on or under any real property of Hazardous Substances, if the existence of such Hazardous Substances triggers a requirement to perform any investigatory, remedial, removal or other response action under any Environmental Laws or if such response action legally could be required by any governmental authority; "Facility" means any property currently owned, leased or occupied by the Company.

  • Impulsive sound means either a single pressure peak or a single burst (multiple pressure peaks) that has a duration of less than one second.

  • Dangerous drug means any of the following:

  • Biological Samples means any physical samples obtained from Study Participants in accordance with the Protocol for the purposes of the Study.

  • ISMS The Information Security Management System as defined by ISO/IEC 27001. The scope of the ISMS will be as agreed by the parties and will directly reflect the scope of the Services;

  • Friable asbestos material means any material that contains more than 1% asbestos by weight and that can be crumbled, pulverized, or reduced to powder when dry, by hand pressure.