OEL for asbestos definition

OEL for asbestos means an occupational exposure limit of 0,1 regulated asbestos fibres per millilitre of air measured in accordance with HSG 248;

Examples of OEL for asbestos in a sentence

  • Personal Protective Equipment and Facilities: The Principal Contractor will ensure that personal protective equipment is provided, capable of keeping the exposure level below the OEL for asbestos.

  • The fiber exposure levels in this study (AM 0.3-0.6 fibres/cm3 in the furnace hall – Paper III) were higher than the current OEL for asbestos (0.1 fibres/cm3 in Norway and many other countries).

  • The first phase of the social partners’ consultation ended on 11 February 2021 and confirmed the social partners’ overall support for revising the current OEL for asbestos.

  • Impact on Member States / national authoritiesAs regards the impact on Member States / national authorities, Member States that have in place an OEL for asbestos at the level of the limit value set in this initiative or lower will be less affected than Member States that have in place a higher OEL.

  • RAC Opinion on an updated risk assessment for asbestos to inform derivation of an OELRECOMMENDATIONThe opinion of RAC on the assessment of the scientific relevance of the current Occupational Exposure Limit (OEL) for asbestos is set out in the table below (Table 1) and in the following summary of the evaluation and supported by Annex 1.SUMMARY TABLEAsbestos is a non-threshold carcinogen and consequently, no health-based OEL can be identified.

  • A respirator zone is an area where the concentration of regulated asbestos fibres in the air is, or is likely to be greater than the OEL for asbestos.

  • Work areas in which the OEL for asbestos (0.1 f/cc) is exceeded are defined as “restricted areas”.For this reason, abatement projects involving the removal of vermiculite from concrete block walls are considered “high risk” projects.If the insulation is removed by gravity, the following work procedures should be used:• Employers must ensure that requirements that apply to asbestos are complied with.• Containment should be set up around the work area.

  • It is found that; SDS assisted P3 type SWNT dispersions provide the most stable and homogeneous solutions when compared to different surfactant - SWNT combinations.

  • Work areas in which the OEL for asbestos (0.1 f/cc) is exceeded are defined as “restricted areas”.For this reason, abatement projects involving the removal of vermiculite from concrete block walls are considered “high risk” projects.If the insulation is removed by gravity, the following work procedures should be used: Employers must ensure that requirements that apply to asbestos are complied with. Containment should be set up around the work area.

  • Amendment 4Recital 9 Text proposed by the European Commission ReasonIn the Netherlands, the national OEL for asbestos in place since 2016 has been 0,002 fibres/cm3 (measured with Scanning Electron Microscopy-SEM/EDXA).

Related to OEL for asbestos

  • Asbestos means the asbestiform varieties of serpentinite (chrysotile), riebeckite (crocidolite), cummingtonite-grunerite, anthophyllite, and actinolite-tremolite.

  • Friable asbestos material means any material that contains more than 1% asbestos by weight and that can be crumbled, pulverized, or reduced to powder when dry, by hand pressure.

  • Processes with Significant Environmental Aspects means the Equipment which, during regular operation or if not properly operated or maintained, may cause or are likely to cause an adverse effect.

  • Polychlorinated biphenyls means aromatic compounds formed in such a manner that the hydrogen atoms on the biphenyl molecule (two benzene rings bonded together by a single carbon-carbon bond) may be replaced by up to ten chlorine atoms; and

  • Radioactive substance means a substance that emits ionizing

  • Polystyrene foam means blown polystyrene and expanded and

  • Friable means a soil condition that is easily crumbled or loosely compacted down to a minimum depth per planting material requirements, whereby the root structure of newly planted material will be allowed to spread unimpeded.

  • Expansion to an existing manufactured home park or subdivision means the preparation of additional sites by the construction of facilities for servicing the lots on which the manufactured homes are to be affixed (including the installation of utilities, the construction of streets, and either final site grading or the pouring of concrete pads).

  • Petroleum means the crude oil removed from the earth and the oils derived from tar sands, shale, and coal.

  • Explosives (1) means solid, liquid or gaseous substances or mixtures of substances which, in their application as primary, booster, or main charges in warheads, demolition and other applications, are required to detonate.

  • Flammable means a chemical that falls into one of the following categories:

  • Underground source of drinking water means an aquifer or its portion:

  • PCBs means polychlorinated biphenyls.

  • Chemical agent shall mean any compound which, when suitably disseminated, produces incapacitating, damaging or lethal effects on people, animals, plants or material property.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Natural uranium means uranium with the naturally occurring distribution of uranium isotopes, which is approximately 0.711 weight percent uranium-235, and the remainder by weight essentially uranium-238.

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Wood waste means untreated wood and untreated wood products, including tree stumps (whole or chipped), trees, tree limbs (whole or chipped), bark, sawdust, chips, scraps, slabs, millings, and shavings.

  • Contaminant means any material, substance or waste that is classified, regulated or otherwise characterized under any Environmental Law as hazardous, toxic, a contaminant or a pollutant or by other words of similar meaning or regulatory effect, including any petroleum or petroleum-derived substance or waste, asbestos and polychlorinated biphenyls.

  • Hazardous waste constituent means a constituent that caused the hazardous waste to be listed in Subpart D of 35 Ill. Adm. Code 721, or a constituent listed in 35 Ill. Adm. Code 721.124.

  • toxic a “pollutant”, a “contaminant”, or words of similar meaning and regulatory effect pursuant to any Environmental Law and also including any petroleum product or by-product, asbestos-containing material, lead-containing paint, mold, polychlorinated biphenyls or radioactive materials.

  • Industrial solid waste means solid waste generated by manufacturing or industrial processes that is not a hazardous waste. Such waste may include, but is not limited to, waste resulting from the following manufacturing processes: electric power generation; fertilizer/agricultural chemicals; food and related products or byproducts; inorganic chemicals; iron and steel manufacturing; leather and leather products; nonferrous metals manufacturing or foundries; organic chemicals; plastics and resins manufacturing; pulp and paper industry; rubber and miscellaneous plastic products; stone, glass, clay, and concrete products; textile manufacturing; transportation equipment; and water treatment. This term does not include mining waste or oil and gas waste.

  • Solid insulator means the insulating coating of wiring harnesses, provided in order to cover and prevent the high voltage live parts from any direct contact.

  • Expanded polystyrene means blown polystyrene and expanded

  • Putrescible waste means a solid waste that contains organic matter capable of being decomposed by microorganisms so as to cause a malodor, gases, or other offensive conditions, or which is capable of providing food for birds and other vectors. Putrescible wastes may form a contaminated leachate from microbiological degradation, chemical processes, and physical processes. Putrescible waste includes, but is not limited to, garbage, offal, dead animals, general household waste, and commercial waste. All solid wastes which do not meet the definitions of inert or chemical wastes shall be considered putrescible wastes.

  • Pollutant means any dredged spoil, solid waste, incinerator residue, filter backwash, sewage, garbage, refuse, oil, grease, sewage sludge, munitions, chemical wastes, biological materials, medical wastes, radioactive substance (except those regulated under the Atomic Energy Act of 1954, as amended (42 U.S.C. §§ 2011 et seq.)), thermal waste, wrecked or discarded equipment, rock, sand, cellar dirt, industrial, municipal, agricultural, and construction waste or runoff, or other residue discharged directly or indirectly to the land, ground waters or surface waters of the State, or to a domestic treatment works. “Pollutant” includes both hazardous and nonhazardous pollutants.