Proposed Installation Date definition

Proposed Installation Date means the nominal date stated in your Application for the installation of Purchase Equipment.
Sample 1Sample 2Sample 3
Proposed Installation Date means the nominal date stated in your Application for the installation of Purchase Equipment. This document is commercial in confidence and must not be reproduced, in whole or in part, without the written permission of Ignite Corporation Pty Ltd This document could contain technical inaccuracies or typographical errors. Changes made to the information herein are incorporated in amendments and new issues of the document. Part E - MPLS Services
Sample 1Sample 2
Proposed Installation Date means the date specified as such in the Quote, subject to any variation of that date in accordance with clause 8.4, 8.5, 8.6 and 8.7. Quote means the document titled as such which forms part of this agreement and is attached to the Terms and Conditions. Site-Specific Performance Estimate means our site-specific estimate of the average daily energy yield of the System for each month, in kWh, as set out in the Full System Design.
Sample 1

Examples of Proposed Installation Date in a sentence

  • We may terminate the standard customer agreement by written notice to you if you have not enabled installation of the Equipment within 60 days of the Proposed Installation Date as stated on your Application.

  • Installing Contractor Information Check here if project will be customer installed Proposed Installation Date Contractor Name Mailing Address Street Number Street Name City State Zip Contact Name Contact Title Phone EmailArea Code Phone Number Ext.

  • We may terminate the standard customer agreement by written notice to you if you have not installed or enabled installation of the Internet Services Related Equipment to take place within 30 days of the Proposed Installation Date stated in your Application.

  • Installation Contractor (Company Name): Contractor's License No.: Proposed Installation Date: Mailing Address: City: State: Zip Code: Daytime Phone: Fax: Email: For inverter-controlled system, meets IEEE Standards and UL 1741 Inverters, Converters, and Controllers for use in Independent Power Systems as set forth in the Rule: Yes NoIf Photovoltaic System, System must be installed in compliance with IEEE Standards, Recommended Practice for Utility Interface of Photovoltaic Systems.

  • Installation Contractor (Company Name): Contractor's License No.: Proposed Installation Date: Mailing Address: City: State: Zip Code: Daytime Phone: Fax: Email: For inverter-controlled system, meets IEEE Standards and UL 1741 Inverters, Converters, and Controllers for use in Independent Power Systems: Yes NoIf Photovoltaic System, System must be installed in compliance with IEEE Standards, Recommended Practice for Utility Interface of Photovoltaic Systems.

  • INSTALLATION CONTRACTOR INFORMATION*Installation Contractor Name: *FL License No.: *Address: *City, State & Zip: *Daytime Phone: Fax: *Email: Proposed Installation Date: D.

  • INSTALLATION CONTRACTOR INFORMATION Installation Contractor Name: FL License No.: * Address: City, State & Zip: Daytime Phone: Fax: *Email: Proposed Installation Date: D.

  • Definitions In this Part D, unless the context requires otherwise: Proposed Installation Date means the nominal date stated in your Application for the installation of Purchase Equipment.

  • Installation Contractor InformationInstallation Contractor: , FL License No.: Address: City: , FL Zip Code: Daytime Phone: Fax: Email: Proposed Installation Date: D.

  • Installing Contractor Information Check here if project will be customer installed Proposed Installation Date Contractor Name Mailing Address Street Number Street Name City State Zip Contact Name Phone Contact Title Email Area Code Phone Number Ext.


More Definitions of Proposed Installation Date

Proposed Installation Date means the nominal date stated in your Application for the installation of Purchase Equipment. Part E - MPLS Services‌ 72. Application of thispart‌ 72.1. This Part E applies if you have requested in your Application that we supply you with the MPLS Service and sets out the terms and conditions on which we will supply you with MPLS Services. 72.2. To the extent relevant, the General Terms apply to the MPLS Service as though specified in full in this Part E and such terms of part of such terms will be relevant except to the extent they relate to any services or product other than MPLS Services or where they conflict with this Part, in which case this Part E will take precedence.
Sample 1
Proposed Installation Date. Mailing Address: City: State: Zip Code: Daytime Phone: Fax: Email: For inverter-controlled system, meets IEEE Standards and UL 1741 Inverters, Converters, and Controllers for use in Independent Power Systems as specified in the Rule? (Yes/No) For induction or synchronous device, meets IEEE Standard 1547 and IEEE/ANSI Standard C37.90 requirements as specified in the Rule? (Yes/No) If Photovoltaic System, the proposed System hardware is in compliance with Underwriters Laboratories (UL) 1741, Standard for Static Inverters and Charge Controllers for Use in Photovoltaic Systems; UL 1703, Standard for Safety: Flat-Plate Photovoltaic Modules and Panels; and XXXX 0000-0000, IEEE Recommended Practice for Qualification of Photovoltaic (PV) Modules. If Photovoltaic System, System must be installed in compliance with IEEE Standards specified in the Rule. All System types must be installed in compliance with applicable requirements of local electrical codes, Pacific Power and the National Electrical Code® (NEC) and must use a non-islanding inverter. The System must include a manual, lockable, load-break (disconnect) switch, accessible at all times to Pacific Power personnel and located within 10 feet of Pacific Power’s meter. The disconnect switch may be located more than 10 feet from Pacific Power’s meter if permanent instructions are posted at the meter indicating the precise location of the disconnect switch. Pacific Power must approve the location of the disconnect switch prior to the installation of the net metering facility. If the Net Metering Facility is designed to provide uninterruptible power to critical loads, either through energy storage, back-up generator, or the generation source, the Net Metering Facility will include a parallel blocking scheme for this backup source. This function may be integral to the inverter manufacturer’s packaged system. Does the Net Metering Facility include a parallel blocking scheme? (Yes/No) (Circle one). Signed (Contractor): Date: Name (Print):
Sample 1

Related to Proposed Installation Date

  • Permitted Installation means the activities and the limits to those activities described in Table 1.1.1 of this Permit.

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • Existing installation means an installation, construction of which began prior to the effective date of any regulation having application to it.

  • New installation means an installation, construction of which began after the effective date of any regulation having application to it.

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • Replacement Date has the meaning set forth in Section 2.08(b).

  • Auction Date means the first Business Day preceding the first day of a Dividend Period.

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • offshore installation means any installation which is intended for underwater exploitation of mineral resources or exploration with a view to such exploitation;

  • Incremental Auction means any of several auctions conducted for a Delivery Year after the Base Residual Auction for such Delivery Year and before the first day of such Delivery Year, including the First Incremental Auction, Second Incremental Auction, Third Incremental Auction or Conditional Incremental Auction. Incremental Auctions (other than the Conditional Incremental Auction), shall be held for the purposes of:

  • Term SOFR Replacement Date has the meaning specified in Section 3.03(b).

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Reduction Date has the meaning set forth in Section 20.1B.

  • Utility Installation means carpeting, window coverings, air lines, power panels, electrical distribution systems, lighting fixtures, space heaters, air conditioning, plumbing, and fencing. Lessor may require that Lessee remove any or all of said alterations, improvements, additions or Utility Installations at the expiration of the term, and restore the Premises to their prior condition. Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, Lessor may require that Lessee remove any or all of the same.

  • drainage installation means a system situated on any premises and vested in the owner thereof and is used for or intended to be used for or in connection with the reception, storage, treatment or conveyance of sewage on that premises to the connecting point and includes drains, fittings, appliances, septic tanks, conservancy tanks, pit latrines and private pumping installations forming part of or ancillary to such systems;

  • Installation Site means the site at which the Product is originally installed.

  • Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.

  • Second Incremental Auction means an Incremental Auction conducted ten months before the Delivery Year to which it relates.

  • SOFR Benchmark Replacement Date means the Benchmark Replacement Date with respect to the then-current Benchmark;

  • Conditional Incremental Auction means an Incremental Auction conducted for a Delivery Year if and when necessary to secure commitments of additional capacity to address reliability criteria violations arising from the delay in a Backbone Transmission upgrade that was modeled in the Base Residual Auction for such Delivery Year.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Applicable Anniversary of the Commencement Date means the fifth (5th) anniversary of the Commencement Date.

  • Military installation means: a base, camp, post, station, yard, center, homeport facility for any ship, or other activity under the jurisdiction of the Department of Defense, including any leased facility, which is located within any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, the Northern Marianas Islands and any other U.S. Territory. Such term does not include any facility used primarily for civil works, rivers and harbors projects, or flood control projects.

  • electrical installation means an electrical installation as defined in the Regulations;