Reference Drawings definition

Reference Drawings means the drawings prepared by the Employer and included in the bidding document.
Sample 1Sample 2Sample 3
Reference Drawings or “Reference Plans” means drawings provided with the RFP that are not designated as Prescriptive or Guidance. Reference Drawings and any CAD files associated therewith are intended only to reduce the Contractor's effort in preparing its Construction Documents, and only to the extent that the Reference Drawings are consistent with the Contractor's design. Offerors shall not rely upon Reference Drawings as a basis for their Proposal. HART makes no representation that Reference
Sample 1Sample 2
Reference Drawings means drawings which represent the City’s preference. The Offeror is allowed to make changes to these drawings provided the changes meet the Contract requirements.
Sample 1

Examples of Reference Drawings in a sentence

  • They shall be endorsed by the Contractor as being in accordance with the Construction Reference Drawings.

  • The Design Phase will be complete upon the issue of a Notice by the Engineer in respect of the comprehensive and complete Construction Reference Drawings Submission for the whole of the Permanent Works like foundation, super structures, water tank, plumbing & sewerage works.

  • Submission / Construction Reference Drawings Submission No /Technical Submission No ] in respect of: The contents of this submission are scheduled in Section A below.

  • The Construction Reference Drawings shall form part of the Working Drawings to be used for construction purposes.

  • The first phase involved conducting a pretest of the survey instrument and conducting focus groups.

  • Excavation to the profile grades shown on the Reference Drawings, and possible alternative profile grades proposed by the Contractor, will expose transitions in Subgrade Materials.

  • The Design Phase will be completed upon the issue of Notice by the Engineer in respect of the comprehensive and complete Construction Reference Drawings Submission on the last set of the Permanent Works.

  • Working drawings/ Shop drawings prepared by the contractor shall be endorsed/ approved by the Consultant as being in accordance with the Construction Reference Drawings/ Good for construction drawings.12.2 Construction Methods and Temporary WorksThe DDC shall review; update and issue the revised drawings based on material samples, mock-ups of civil, architectural finishes items of the construction contractor without any cost implications.

  • For additional information on Reference Drawings, see spec section 00 3119 EXISTING CONDITION INFORMATION.

  • A flow diagram of the system is shown in Figure 4.2-1 and Reference Drawings 1 and 2.


More Definitions of Reference Drawings

Reference Drawings means drawings which represent HART’s preference. The Offeror is allowed tomake changes to these drawings provided the changes meet the Contract requirements.
Sample 1

Related to Reference Drawings

  • Contract Drawings means only those drawings specifically entitled as such and listed in the Specifications or in any Addendum, or any drawings furnished by the Commissioner, pertaining or supplemental thereto.

  • Construction Drawings means those drawings containing the technical details associated with the design, construction and installation of the Infrastructure;

  • As-built drawings, as used in this clause, means drawings submitted by the Contractor or subcontractor at any tier to show the construction of a particular structure or work as actually completed under the contract. “As-built drawings” shall be synonymous with “Record

  • Shop Drawings means drawings, submitted to the PHA by the Contractor, subcontractor, or any lower tier subcontractor, showing in detail (1) the proposed fabrication and assembly of structural elements and (2) the installation (i.e., form, fit, and attachment details) of materials of equipment. It includes drawings, diagrams, layouts, schematics, descriptive literature, illustrations, schedules, performance and test data, and similar materials furnished by the Contractor to explain in detail specific portions of the work required by the contract. The PHA may duplicate, use, and disclose in any manner and for any purpose shop drawings delivered under this contract.

  • Reference Day means each Business Day in the relevant Interest Period, other than any Business Day in the Lock-out Period;

  • The DRAWINGS / MAPS means the drawing/map or drawings/maps mentioned in NIT and any modifications of them approved by the Employer or any further Working drawings/maps or sketches by the Employer or any further working drawings/maps or sketches which may be furnished or approved in writing by the Employer.

  • Reference mass means the mass of the vehicle in running order less the uniform mass of the driver of 75 kg and increased by a uniform mass of 100 kg.

  • Working Drawings means the final working drawings approved by Landlord, as amended from time to time by any approved changes thereto, and “Work” means all improvements to be constructed in accordance with and as indicated on the Working Drawings, together with any work required by governmental authorities to be made to other areas of the Building as a result of the improvements indicated by the Working Drawings. Landlord’s approval of the Working Drawings shall not be a representation or warranty of Landlord that such drawings are adequate for any use or comply with any Law, but shall merely be the consent of Landlord thereto. Tenant shall, at Landlord’s request, sign the Working Drawings to evidence its review and approval thereof. After the Working Drawings have been approved, Tenant shall cause the Work to be performed in accordance with the Working Drawings.

  • Special Drawing Rights and the symbol “SDR” mean special drawing rights as valued by the International Monetary Fund in accordance with its Articles of Agreement”;

  • Maximum Drawing Amount means at the time in question the sum of the maximum amounts which LC Issuer might then or thereafter be called upon to advance under all Letters of Credit which are then outstanding.

  • Final Drawing has the meaning specified in Section 3.05(i).

  • Drawings means the drawings prepared by the Architects and issued by the Engineer and referred to in the specifications and any modifications of such drawings as may be issued by the Engineer from time to time ‘Contract value shall mean value of the entire work as stipulated in the letter of acceptance of tender subject such additions there to or deductions there from as may be made under the provide herein after contained.

  • Interest Drawing has the meaning assigned to such term in Section 3.6(a).

  • Non-Availability Charges has the meaning set forth in the CAISO Tariff.

  • Shop Drawing means any and all drawings, diagrams, layouts, explanations, illustrations, manufacturer's drawings or other written or graphic materials which illustrate any portion of the construction work.

  • General Arrangement Drawings shall have the meaning set forth in Clause 3.1 (iii) (b);

  • Record Drawings means a reproducible set of Construction Documents into which the Architect has incorporated: (a) clarifications, sketches and other Modifications made by the Architect during the Construction Phase; and (b) significant changes in the Work made during construction as shown on the Trade Contractor’s As-Built Drawings.

  • Downgrade Drawing has the meaning assigned to such term in Section 3.6(c).

  • Reference Documents means the documents provided with and so designated in the RFP. The Reference Documents, including Plans contained therein and/or so designated, are not Contract Documents and were provided to the Design-Builder for informational purposes only and are relied upon at the Design-Builder’s own risk.

  • Reference Exchange Rate means the exchange rate which is used as the basis to calculate any currency exchange and which is made available by the payment service provider or comes from a publicly available source;

  • Reference Month means the calendar month for which the level of the Inflation Index is reported as specified in the applicable Final Terms, regardless of when this information is published or announced, except that if the period for which the Relevant Level was reported is a period other than a month, the Reference Month shall be the period for which the Relevant Level is reported.

  • AMPS Basic Maintenance Amount, as of any Valuation Date, means the dollar amount equal to (i) the sum of (A) the product of the number of shares of AMPS and Other AMPS Outstanding on such Valuation Date multiplied by the sum of (a) $25,000 and (b) any applicable redemption premium attributable to the designation of a Premium Call Period; (B) the aggregate amount of cash dividends (whether or not earned or declared) that will have accumulated for each share of AMPS and Other AMPS Outstanding, in each case, to (but not including) the end of the current Dividend Period that follows such Valuation Date in the event the then current Dividend Period will end within 49 calendar days of such Valuation Date or

  • Drawing means the drawing or drawings specified in or annexed to the Specifications;

  • Available Commitment means a Lender’s Commitment minus:

  • Non-Extension Drawing has the meaning specified in Section 3.5(d).

  • Available Commitments shall refer to the aggregate of the Lenders’ Available Commitments hereunder.