General Arrangement Drawings definition

General Arrangement Drawings shall have the meaning set forth in Clause 3.1 (iii) (b);
Sample 1Sample 2Sample 3
General Arrangement Drawings shall have the meaning set forth in Clause 3.1 (iii) (b); “GOI” or “Government” means the Government of India; “Good Industry Practice” means the practices, methods, techniques, designs, standards,skills,diligence,efficiency,reliabilityandprudencewhicharegenerallyand reasonably expected from a reasonably skilled and experienced contractor engaged in the same type of undertaking as envisaged under this Agreement and which would be expected to result in the performance of its obligations by the Contractor in accordance with this Agreement, Applicable Laws and Applicable Permits in reliable, safe, economical and efficientmanner; Contract AgreementPage 21 of 153 “Widening / Improvement to 4 (Four) Lane with Paved Shoulder configuration of existing single lane road from Kachukhana Harichara Paglagaunj to Dhubri - Phulbari Bridge approach (Package-II) of Srirampur - Dhubri Section of NH-127B from existing Km 28.050 to Km 55.060 (Design Km 27.650 to Km 54.154), (Design Length=26.504 Km) on EPC Mode in the State of Assam under JICA - ODA loan assistance.” Mar 2022 “Government Instrumentality” means any department, division or sub- division of the Government or the State Government and includes any commission, board, authority, agency or municipal and other local authority or statutory body including panchayat under the control of the Government or the State Government, as the case may be, and having jurisdiction over all or any part of the Project Highway or the performance of all or any of the services or obligations of the Contractor under or pursuant to this Agreement; “Handover Memorandum” shall have the meaning set forth in Clause 8.2; “IRC” means the Indian Roads Congress; “Indemnified Party” means the Party entitled to the benefit of an indemnity pursuant to Article 25; “Indemnifying Party” means the Party obligated to indemnify the other Party pursuant to Article 25; “Indirect Political Event” shall have the meaning set forth in Clause 21.3; “Insurance Cover” means the aggregate of the maximum sums insured under the insurance taken out by the Contractor pursuant to Article 20, and includes all insurances required to be taken out by the Contractor under Clauses 20.1 and 20.9 but not actually taken, and when used in the context of any act or event, it shall mean the aggregate of the maximum sums insured and payable or deemed to be insured and payable in relation to such act orevent; “Intellectual Property” means all patents, trademarks, service marks, logos,...
Sample 1Sample 2
General Arrangement Drawings means the documents of that description certified as the general arrangement drawings by the Secretary of State for the purposes of this Order;
Sample 1Sample 2

Examples of General Arrangement Drawings in a sentence

  • General Arrangement Drawings Plot Plan Single-Line Diagrams with metering and Point of Interconnection clearly shown EXAMPLE SINGLE-LINE DIAGRAM Heat Balance DiagramFor those resources that burn fuel, then provide a heat balance diagram for each fuel type used.

  • The final location will be decided during the installation stage as per the site conditions and the General Arrangement Drawings & Site Layout Plan submitted during the design stage.

  • Six (6) sets of complete descriptive catalogue, Dimensional General Arrangement Drawings, detailed parts list of each and every item are to be furnished by the successful tenderer to enable us to verify the items at the time of receipt & installation.

  • Six (6) sets of complete descriptive catalogue, Dimensional General Arrangement Drawings with Electrical /Instrumentation Schemes, detailed parts list of each and every equipment are to be furnished by the successful tenderer to enable us to verify the items at the time of receipt and installation.

  • The Tenant Improvement Allowance shall be equal to Twenty-Three and 00/100 DOLLARS ($23.00) per square foot of Usable Area of the Premises, which equates to the total amount of Two Hundred Seventy-Four Thousand Five Hundred Ninety-Seven and 00/100 DOLLARS ($274,597.00), subject to adjustment based on verification of the Usable Area of the Premises pursuant to the Lease.

  • The Purchaser shall provide project specific drawing / documents like General Arrangement Drawings, Layouts etc.

  • The General Arrangement Drawings shall be used as the background for the firing arc drawings.

  • General Arrangement Drawings of all plant, control boards, fittings and apparatus or any part thereof and of installation layout arrangement of such plant and apparatus.

  • Testing/sampling locations will be noted on General Arrangement Drawings and are provided in accordance with the Agreement.

  • On completion of the assessment, the assessor will hold a closing meeting with the Manager of the company undertaking the assessment.


More Definitions of General Arrangement Drawings

General Arrangement Drawings shall have the meaning set forth in Clause 3.1 (iii) (b); “GOI” or “Government” means the Government of India;
Sample 1Sample 2
General Arrangement Drawings fieneral arrangement drawings for major treatment units shall be developed.
Sample 1
General Arrangement Drawings shall have the meaning set forth in Clause 3.1 (iii) (b); “GOI” or “Government” means the Government of India; “Good Industry Practice” means the practices, methods, techniques, designs, standards,skills,diligence,efficiency,reliabilityandprudencewhicharegenerallyand reasonably expected from a reasonably skilled and experienced contractor engaged in the same type of undertaking as envisaged under this Agreement and which would be expected to result in the performance of its obligations by the Contractor in Contract AgreementPage 20 of 159 Widening & Upgradation to 4-lane with paved shoulder from km 16.700 (end of Seer Hamdan Bypass) to km 39.450 (start of Pahalgam Bypass), Package-II of Khanabal - Pahalgam - Chandanwadi - Baltal section of NH-501 in the UT of Jammu & Kashmir on EPC Mode January’ 2024
Sample 1
General Arrangement Drawings shall have the meaning set forth in Clause 3.1 (iii) (b); “GOI” or “Government” means the Government of India; “Good Industry Practice” means the practices, methods, techniques, designs, standards,skills,diligence,efficiency,reliabilityandprudencewhicharegenerallyand reasonably expected from a reasonably skilled and experienced contractor engaged in the same type of undertaking as envisaged under this Agreement and which would be expected to result in the performance of its obligations by the Contractor in accordance with this Agreement, Applicable Laws and Applicable Permits in reliable, safe, economical and efficientmanner; Contract AgreementPage 20 of 151 “Construction of Four Lane Badarpur Bypass from Design Chainage km 27+300 at crossing with NH-6 (Old NH-44) Near Siddeswar Pt.-I Village to Design Chainage km 38+600 on NH-37 (Old NH-44) at Kandigram Chaita Village in the State of Assam on EPC Mode under Bharatmala Pariyojana in Economic Corridors (Project Length – 11.3
Sample 1
General Arrangement Drawings shall have the meaning set forth in Clause 3.1 (iii) (b); “GOI” or “Government” means the Government of India; “Good Industry Practice” means the practices, methods, techniques, designs, standards,skills,diligence,efficiency,reliabilityandprudencewhicharegenerallyand reasonably expected from a reasonably skilled and experienced contractor engaged in the same type of undertaking as envisaged under this Agreement and which would be expected to result in the performance of its obligations by the Contractor in accordance with this Agreement, Applicable Laws and Applicable Permits in reliable, safe, economical and efficientmanner; Contract AgreementPage 20 of 160 “Widening / Improvement to 4 (Four) Lane with Paved Shoulder configuration of existing single lane road from Srirampur (near Bhairiguri Village) to Kachukhana Harichara Paglagaunj (Package-I)
Sample 1
General Arrangement Drawings shall have the meaning set forth in Clause 3.1 (iii) (b); “GOI” or “Government” means the Government of India; “Good Industry Practice” means the practices, methods, techniques, designs, standards,skills,diligence,efficiency,reliabilityandprudencewhicharegenerallyand reasonably expected from a reasonably skilled and experienced contractor engaged in the same type of undertaking as envisaged under this Agreement and which would be expected to result in the performance of its obligations by the Contractor in accordance with this Agreement, Applicable Laws and Applicable Permits in reliable, safe, economical and efficientmanner; “Government Instrumentality” means any department, division or sub- division of the Government or the State Government and includes any commission, board, Contract AgreementPage 20 of 251 Construction of Service Road and RCC Drain on both sides of NH 37A from Kaliabor –Tiniali- (Km 0.000) to Kolong Bridge (Km 0.600) in Nagaon district in the state of Assam under EPC Mode Nov 2023
Sample 1

Related to General Arrangement Drawings

  • Contract Drawings means only those drawings specifically entitled as such and listed in the Specifications or in any Addendum, or any drawings furnished by the Commissioner, pertaining or supplemental thereto.

  • Working Drawings means the final working drawings approved by Landlord, as amended from time to time by any approved changes thereto, and “Work” means all improvements to be constructed in accordance with and as indicated on the Working Drawings, together with any work required by governmental authorities to be made to other areas of the Building as a result of the improvements indicated by the Working Drawings. Landlord’s approval of the Working Drawings shall not be a representation or warranty of Landlord that such drawings are adequate for any use or comply with any Law, but shall merely be the consent of Landlord thereto. Tenant shall, at Landlord’s request, sign the Working Drawings to evidence its review and approval thereof. After the Working Drawings have been approved, Tenant shall cause the Work to be performed in accordance with the Working Drawings.

  • Shop Drawings means drawings, submitted to the PHA by the Contractor, subcontractor, or any lower tier subcontractor, showing in detail (1) the proposed fabrication and assembly of structural elements and (2) the installation (i.e., form, fit, and attachment details) of materials of equipment. It includes drawings, diagrams, layouts, schematics, descriptive literature, illustrations, schedules, performance and test data, and similar materials furnished by the Contractor to explain in detail specific portions of the work required by the contract. The PHA may duplicate, use, and disclose in any manner and for any purpose shop drawings delivered under this contract.

  • Expiry Date (Data di Scadenza) means the Expiry Date as specified in § 1 of the Product and Underlying Data.

  • Project Implementation Manual or “PIM” means the manual setting out the measures required for the implementation of the Project, as the same may be amended from time to time, subject to prior approval of the Association;

  • Project Implementation Plan means the detail plan submitted by the Developer with regard to development of Project Facilities and its operation and management thereof in accordance with this Agreement and to be appended as Schedule 9 to this Agreement.

  • main phase employment and support allowance means an employment and support allowance where the calculation of the amount payable in respect of the applicant includes a component under section 2(1)(b) or 4(2)(b) of the Welfare Reform Act 2007 except in Part 1 of Schedule 1;

  • Project Implementation Unit or “PIU” means a Project Implementation Unit referred to in paragraph 2 (a) of Schedule 1 to the Project Agreement;