Rotameter definition

Rotameter means a device that measures the flow rates of sampling pumps in the field. NYSDOH‐ELAP mandates that rotameters be calibrated every three (3) months.
Sample 1

Examples of Rotameter in a sentence

  • Rotameter, or equivalent, capable of measuring flow rate to within 2 percent of selected flow rate of 2 liters/min.

  • Rotameter with flow-control valve in the 0 to 1.0 cubic-foot per hour (0 to 500 ml per minute) range.

  • Fluid flow measurement using Pitot tube, Flow nozzle, Rotameter, Notches etc.

  • Rotameter 1 and 2 were operated in both locations for this test to ensure identical readings.

  • Rotameter, or equivalent, capable of measuring flow rate to within 2 percent of the selected flow rate of about 1 liter/min (0.035 cfm).

  • Electronic type Rotameter for permeate and rejection along with companion flanges.

  • Rotameter, or equiva- lent, accurate to within 5 percent at the se- lected flow rate of approximately 2 liters/ min (4.2 ft3/hr).

  • Rotameter, or equivalent, to measure gas flow rate of 0 to 1.0 liter/min (0 to 0.035 cfm) through NDIR.

  • Rotameter, or equivalent, to measure flow rates in the range from 0.5 to 2 liters/min (1 to 4 ft3/hr).

  • The sample probe shall be long enough to go through and extend no less than 1.0 meter below the landfill cover.If the sample probe is to be driven into the landfill, the bottom cap should be designed to facilitate driving the probe into thelandfill.2.2 Sampling Train.2.2.1 Rotameter with Flow Control Valve.

Related to Rotameter

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Scaling as used herein, involves:

  • Scale means the height, width and length of each building proposed within the development in relation to its surroundings;

  • Tare Weight means the weight of an empty shipping container, excluding all materials used for wrapping, cushioning, banding, waterproofing, packaging, blocking and bracing articles within the exterior container.

  • Pitch means a Grass Pitch or Football Turf Pitch.

  • Parameter means a physical, biological, or chemical property of state water when a value of that

  • interval meter means a meter that measures and records electricity use on an hourly or sub-hourly basis;

  • Stack means any point in a source designed to emit solids, liquids, or gases into the air, including a pipe or duct but not including flares.

  • Density means the permitted number of dwelling units per

  • PNode has the meaning set forth in the CAISO Tariff.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Check Meter means the Buyer revenue-quality meter section or meter(s), which Buyer may require at its discretion, as set forth in Section 3.08(b) and will include those devices normally supplied by Buyer or Seller under the applicable utility Electric Service Requirements.

  • Drum means any cylindrical metal shipping container of 13 to 110 gallon capacity.

  • Cart means a plastic Container with a hinged lid and wheels that is serviced by an automated or semi- automated Collection vehicle. A Cart has capacity of 20, 35, 64 or 96 gallons (or similar volumes).

  • PAD means a Preauthorized Debit.

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Feed means feed as defined in point (4) of Article 3 of Regulation (EC) No 178/2002;

  • Rack means a mechanism for delivering motor vehicle fuel or diesel from a refinery or terminal into a truck, trailer, railroad car, or other means of non-bulk transfer.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Outputs means the goods or services that are produced by an entity or other person;