Settling time definition

Settling time. (3) means the time required for the output to come within one-half bit of the final value when switching between any two levels of the converter.
Sample 1Sample 2Sample 3
Settling time means in relation to Reactive Current response from a Providing Unit, the length of time from Voltage Dip inception for Reactive Current to settle within +/-10% of its steady-state value;
Sample 1Sample 2Sample 3
Settling time means in relation to a step response test or simulation of a control system, the time measured from initiation of a step change in an input quantity to the time when the magnitude of error between the output quantity and its final settling value remains less than 10% of:
Sample 1Sample 2

Examples of Settling time in a sentence

  • Settling time after the completion of drilling may be necessary to accomplish this.

  • Settling time refers to the time required for the system to reach the stable equilibrium.

  • The analysis was carried out for 20 experimental runs to accommodate more interactions of the experimental factors; dosage (A) g/L, pH (B), and C (Settling time) in Minutes.

  • Settling time is the time required for the process variable to get within a certain percentage (usually 5%) of the final value [90].

  • Settling time : Measure a signal related to the measurement of settling time as a trigger of position command passing completion.

  • Settling time of fine fraction of suspended sediments within the AP is much lower than residence time of AP in the Black Sea, i.e., AP mixes with ambient saline water and dissipates more quickly than fine suspended sediments settle from surface layer to subjacent sea.

  • Settling time and overshoot for non- ideal case are referred to steady-state values from ideal case, since fatigue prevents non-ideal case from reaching steady-state.

  • Settling time is defined as the time following the application of a step voltage input for the amplifier output voltage to settle within a specified percentage of its final value.

  • Weighing capacity 200 gm Settling time 2 second Suitable internal and external adjustment weights.

  • The points in the shaded lower envelope area of the point cloud in Figure 4 represent the Pareto front, as they give the best tradeoffs between high final accuracy and low settling time.Surprisingly, the Pareto front of the recursive implementa- tions (i.e., without repredictions of previous labels) seems to achieve very similar performances in terms of final accuracy and settling time as the sliding window implementations (i.e.,Figure 4: Settling time vs.

Related to Settling time

  • Settling Parties means, collectively, Defendant and Plaintiffs, individually and on behalf of the Class and all Released Persons.

  • Billing Period means (subject to Article 6.1 of the Agreement) the calendar month ending with the Metering Date. The first Billing Period shall commence from the Commercial Operation Date and end with the Metering Date corresponding to the month in which the Commercial Operation Date occurs.

  • Settlement Cycle means the period of Clearance System Business Days following a transaction on the Relevant Exchange in the Underlying, during which period settlement will customarily take place according to the rules of such Relevant Exchange.

  • Representative Plaintiffs means Plaintiffs Xxxxx Xxxxxxx, Xxxxxxx Xxxxxxx, and Xxxxxx X. Xxxxx.

  • Settlement Period has the meaning specified therefor in Section 2.02(d)(i) hereof.

  • Settling Defendant s Property” shall mean all portions of the Site owned by Settling Defendant as of the date of signature of the Consent Decree by Settling Defendant.

  • Trading Period has the meaning set out in the TSC;

  • Rolling Period means, as of any date, the four Fiscal Quarters ending on or immediately preceding such date.

  • Waiting Period shall have the meaning set forth in Section 2.2.

Most Referenced Clauses

Most Referenced Definitions