Total hydrocarbons (THC) means the sum of all volatile compounds measurable by a flame ionization detector (FID).
Contract Quantity means the quantity of Delivered Energy expected to be delivered by Seller during each Contract Year as set forth in the Cover Sheet.
Total tetrahydrocannabinol means the same as that term is defined in § 3.2-4112.
Normal Minimum Generation means the lowest output level of a generating resource under normal operating conditions.
Paying quantities as used herein shall mean and refer to quantities of oil and gas or of either of them sufficient to pay for the current cost of producing same.
Type B quantity means a quantity of radioactive material greater than a Type A quantity.
Small quantity generator means a generator who generates less than 1000 kg of hazardous waste in a calendar month.
Normal form radioactive material means radioactive material that has not been demonstrated to qualify as special form radioactive material.
Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.
Geothermal fluid means water in any form at temperatures greater than 120
Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.
Quarterly (1/Quarter) sampling frequency means the sampling shall be done in the months of March, June, August, and December, unless specifically identified otherwise in the Effluent Limitations and Monitoring Requirements table.
Type A quantity means a quantity of radioactive material, the aggregate radioactivity of which does not exceed A1 for special form radioactive material or A2 for normal form radio- active material, where A1 and A2 are given in Appendix O or may be determined by procedures described in Appendix O.
Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.
Operating parameter value means a minimum or maximum value established for a control device or process parameter that, if achieved by itself or in combination with one (1) or more other operating parameter values, determines that an owner or operator has complied with an applicable emission limit.
High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).
Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.
tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.
Required Quantity in a unit price Contract shall mean the actual quantity of any item of Work or materials which is required to be performed or furnished in order to comply with the Contract.
Condensate means hydrocarbon liquid separated from natural gas which condenses due to changes in the temperature or pressure and remains liquid at standard conditions.
Modular building manufacturer means a person or corporation who owns or operates a
Metered Quantity means apparent power, reactive power, active power, with associated time tagging and any other quantity that may be measured by a Party’s Metering Equipment and that is reasonably required by either Party for Security reasons or revenue requirements.
noxious liquid substance means any substance designated in Appendix II to this Annex or provisionally assessed under the provisions of Regulation 3(4) as falling into Category A, B, C or D.
Disposal area means 1 or more of the following at a
Indefinite quantity contract means a fixed price contract that:
Fully Burdened Manufacturing Cost means, with respect to any Licensed Product supplied by or on behalf of NVCR to Zai hereunder if such Licensed Product (or any precursor or intermediate thereof) is manufactured by a Third Party manufacturer [***].