We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Site Tests definition

Site Tests means the site tests identified in the Test Plan;
Site Tests has the meaning ascribed thereto in Section 2.5(a).
Site Tests means the on-site tests of the Customized MBGPS to be carried out at the Landfill Site by the Contractor, as described in Schedule C.

Examples of Site Tests in a sentence

  • Sewer contractor shall pay all charges associated with the connection by the local Authority of the drainage to the main sewer, including necessary reinstatements 3.0 Testing and Inspection 3.1 Site Tests – Pipework Systems a) Above Ground Internal Water Services Installation All water service pipe system installed above ground shall be tested hydraulically for a period of one hour to not less than one and half times to design working pressure.

  • The System Test shall be performed as soon as the iDEN Switch and Site Tests are completed.

  • Appendix A Site Tests Tests shall be carried out in the positions detailed below or in the case of a dispute in the area of concern.

  • Execution Site Tests: An installation check, start-up and four (4) hour load bank test shall be performed by the manufacturers’ local representative as arranged by the successful bidder.

  • The System Test shall be performed as soon as the Switch and Site Tests are completed.

  • Strategic Planning and Business Performance: A Study of SMEs in Malaysia.

  • FIELD QUALITY CONTROL .1 Site Tests: conduct following tests in accordance with Section 01 45 00- Quality Control and submit report as described in PART 1 -ACTION AND INFORMATIONAL SUBMITTALS.

  • Following the Site Tests and prior to handover, mechanical ventilation or air conditioning systems shall be balanced by means of grilles, dampers and other special controls installed, so as to give the required air flow rates and where applicable the desired temperatures, pressures and humidity conditions in all areas served by the said systems.

  • Site Tests and checks for LT Bus Ducts 001 GeneralAll the equipment will be tested at site to know their condition and to prove suitability for required performance.The test indicated in following pages will be conducted after installation.

  • Discriminatory Outcomes Due to SOI Status‌ Prohibited ActsSoft RefusalsNon-DisclosureNoneGrand TotalPhone111462960Site*111121236Grand Total222584196* Site Tests consist of two individual test parts Table 4 disaggregates results by community area.


More Definitions of Site Tests

Site Tests means tests carried out on site.

Related to Site Tests

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Acceptance Tests means those tests performed during the Performance Period which are intended to determine compliance of Equipment and Software with the specifications and all other Attachments incorporated herein by reference and to determine the reliability of the Equipment.

  • Performance Tests means all tests meant to ensure that the Plant(s)/Unit(s) is/are in all respects in accordance with the requirements of the Contract and that the Plant functions properly and smoothly, in all respects as per the approved design parameters, within the permissible tolerances, and satisfies all the stipulated operating parameters, and will include the Guarantee Tests.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • Operational Acceptance Tests means the tests specified in the Technical Requirements and Agreed Project Plan to be carried out to ascertain whether the System, or a specified Sub system, is able to attain the functional and performance requirements specified in the Technical Requirements and Agreed Project Plan, in accordance with the provisions of GCC Clause 27.2 (Operational Acceptance Test).

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Coverage Tests The Overcollateralization Ratio Test and the Interest Coverage Test, each as applied to each specified Class or Classes of Secured Debt.

  • Drug use test means a scientifically substantiated method to test for the presence of illegal or performance-enhancing drugs or the metabolites thereof in a person’s urine.

  • Acceptance Test is a test of the Features executed by the Customer to prepare the acceptance.

  • Penetration Testing means security testing in which assessors mimic real-world attacks to identify methods for circumventing the security features of an application, system, or network. (NIST SP 800-115)

  • Performance Test means all operational checks and tests required to determine the performance parameters including inter-alia capacity, efficiency and operating characteristics of the Stores as specified in the Contract.

  • Screening Test means a drug or alcohol test which uses a method of analysis allowed by the Minnesota Drug and Alcohol Testing in the Workplace Act to be used for such purposes.

  • Site Engineer means an Engineer appointed by the SBIIMS at site as their representative for day-to-day supervision of work and to give instructions to the contractors.

  • Subsurface Borings and Testing means borings, probings and subsurface explorations, laboratory tests and inspections of samples, materials and equipment; appropriate professional interpretations of all the foregoing.

  • Percolation test means a subsurface soil test at the depth of a proposed absorption system or similar component of an OWTS to determine the water absorption capability of the soil, the results of which are normally expressed as the rate at which one inch of water is absorbed. The rate is expressed in minutes per inch.

  • Cannabis testing facility means an entity registered by

  • Site Visit means a visit to the Site; and

  • Site/s means any location where the Client Concerned have equipment or infrastructure installed.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Project Completion means the date, as determined by the Division after consultation with the Recipient, that operation of the Project is initiated or is capable of being initiated, whichever comes first.

  • Test means such test as is prescribed by the particulars or considered necessary by the Inspecting Officer whether performed or made by the Inspecting Officer or any agency acting under the direction of the Inspecting Officer;

  • Excavation work means the making of any man-made cavity, trench, pit or depression formed by cutting, digging or scooping;

  • Project Engineer means the surveyor or engineer employed by or private

  • Phase 1 means the phase of the ATP comprised of: (1) improvements to the State Street Substation; (2) construction of the Proposed Line; (3) the rebuilding of NYSEG’s existing Lines 971 and 000 xxxxx xx Xxxxxxxx Xxxx xx the NYSEG ROW to allow for construction of the Proposed Line as intended; (4) improvements to the Elbridge Substation to accept the Proposed Line; and (5) National Grid’s conveyance to NYSEG of the NYSEG Acquired ROW and such other land interests as contemplated by the Purchase and Sale Agreement.