Terminating Device definition

Terminating Device means a router that is used to terminate the Circuit and present connectivity through a single Fast/ Gig Ethernet port to the customers network (normally via a firewall);
Sample 1Sample 2Sample 3
Terminating Device means an optical network termination unit or a network interface device or any device which performs the function of those devices (as the context requires); UNI has the meaning given to that term in the Operations Manuals; and Wholesale Services means any or all of the wholesale telecommunications services (and may include (where the context permits) any other services or equipment associated with the supply of those services) set out in the Service List, but does not include Ancillary Services.
Sample 1Sample 2Sample 3
Terminating Device means either a NID or an ONT.
Sample 1Sample 2Sample 3

Examples of Terminating Device in a sentence

  • If an End User causes any damage to any LFC Equipment or the LFC Network, then subject to the Service Provider having complied at all relevant times with clauses 2.2(d) and 10.2(d), the Service Provider will only be responsible to the LFC for damage to the Terminating Device caused by the End User and not to any other part of the LFC Equipment or the LFC Network.

  • End User access services delivered over the Vision Network may require Network Terminating Unit (NTU) or Network Terminating Device (NTD) to facilitate a connection.

  • The Service Provider will discharge this responsibility by reimbursing the LFC for the reasonable cost of repairing or replacing the relevant Terminating Device.

  • In the event that University disputes the Services Fees invoiced as provided above, the Parties will expeditiously work together in good faith to resolve such dispute.

  • For the avoidance of doubt, the Access router(s) will, by default be configured to act as a Terminating Device only.

  • Each Service consists of a VLAN from the Network Terminating Device (that supports Q-in-Q) to the applicable Aggregation Point, terminating via a single Ethernet port on the CPE side and redundant Ethernet ports at the Aggregation point.

  • FSD contracts include activation and assurance activities: Activation - For premises with an existing fibre connection from the street to the End-User premises, the activation includes cabling a connection from the Premises Connection Device (PCD) outside the premises to the inside of the premises and installing the Network Terminating Device (NTD).

  • Subject to the Trade Practices Act 1974, nbnTM as the owner of the equipment will maintain and repair their equipment including the Network Terminating Device (NTD) which may be installed at the Applicants premises.

  • The NBN Co Equipment at an end user premises connected to NBN Co Fibre Network consists of a Network Terminating Device (NTD) and a Power Supply Unit (PSU).

  • How the transition works For some end user customers, the transition process will require a service technician from Opticomm to attend your premises to make changes to the network equipment either inside your premises, or on the outside of your building (the Network Terminating Device or NTD, otherwise known as an Optical Network Terminal or ONT).


More Definitions of Terminating Device

Terminating Device means a router that is used to terminate the Circuit and present connectivity through a single Fast/ Gig Ethernet port to the customers network (normally via a firewall); [if !supportLists] 23. [endif]"Rydal" / "we" / "us" means Rydal Communications LTD (Company Registration Number 06738960) of 000 Xxxxxxxxx Xxxx, Xxxxxxxxxxxx, XX00XX. [if !supportLists] 2. [endif]2 THE SERVICES [if !supportLists] 1. [endif]2.1 Rydal shall provide the Leased Line Service at the data transfer speed stated on the Customer Order Form, subject to the terms of this Agreement. [if !supportLists] 2. [endif]2.2 As part of the Leased Line Service, Rydal agrees to supply and you agree to purchase (or rent, where the Customer Order Form specifies a Rental Agreement) the Equipment (if any) specified in the Customer Order Form. [if !supportLists] 3. [endif]2.3 You agree to install the Equipment on (or prior to) the Activation Date. The SLA relating to the Leased Line Service shall not come into effect and Rydal shall have no liability for any failure to deliver the Service under these Terms and Conditions or any SLA relating to the Service until the Equipment has been installed and connected to the Telecommunications Circuit by you. Rydal reserves the right to recover from you any charges incurred in providing onsite assistance. [if !supportLists] 4. [endif]2.4 We will configure and deliver to your Site the Equipment to be connected by you to the Telecommunications Circuit at your Site [if !supportLists] 5. [endif]2.5 Whilst we will use reasonable endeavours to provide the Services and/or Equipment to you within any timescales specified by us or agreed with or requested by you, we will not be liable to you for any delay in providing or failure to provide the Services and/or Equipment within such timescales. [if !supportLists] 6. [endif]2.6 Rydal shall not be obliged to provide the Leased Line to you unless and until we have received written confirmation, or (if requested in our discretion) evidence, that all installation work at your premises is complete. [if !supportLists] 7. [endif]2.7 You shall be responsible for the Charges from the Activation Date and any construction charges associated to your install. [if !supportLists] 8. [endif]2.8 We shall allocate a range of Internet Protocol (IP) addresses for your use for machines on your network for the duration of this Agreement. It will be your responsibility to connect the Equipment to, and to configure your machines on, your own netwo...
Sample 1

Related to Terminating Device

  • Terminating Party As defined in Section 7.1(f).

  • Terminating Event means any of the following events:

  • Third Party Terminating Carrier means a Telecommunications Carrier to which traffic is terminated when CLEC originates traffic that is sent through AT&T-TSP’s network, i.e., CLEC is using AT&T-TSP’s Transit Traffic Service.

  • Termination, Moving You may cancel your acceptance of the Agreement with XOOM at any time prior to midnight of the thirtieth (30th) calendar day after the date of the first bill from your utility that includes XOOM charges for gas supply service without penalty or cancellation fee by calling XOOM at 0-000-000-0000 or by sending an email to xxxxxxxxxxxx@xxxxxxxxxx.xxx. When moving to an address within your local utility’s service territory, XOOM will make every effort to transfer your service to your new service address, provided that you notify XOOM within fifteen (15) days of your move. If a transfer of service is not successful or you move to a location outside your local utility’s service territory, you may cancel this Agreement at no cost to you. Failure to notify XOOM of your move will be considered a cancellation of this Agreement in accordance with its terms.

  • Potential Termination Event means an event which, with the passage of time or the giving of notice, or both, would constitute a Termination Event.

  • Network Termination Point (NTP) means the physical point at which a subscriber is provided with access to a public communications network; in the case of networks involving switching or routing, the NTP is identified by means of a specific network address, which may be linked to a subscriber number or name;

  • Company Termination Event has the meaning set forth in Section 10 hereof.

  • Terminating Company Breach has the meaning specified in Section 10.01(b).

  • Constructive Termination means:

  • Termination Warning Notice means a notice sent by the Secretary of State to the Academy Trust, stating his intention to terminate this Agreement.

  • Anticipatory Termination means a termination of employment where PNC terminates your employment with PNC (other than for Misconduct or Disability) prior to the date on which a Change of Control occurs, and you reasonably demonstrated that such termination of employment (i) was at the request of a third party that has taken steps reasonably calculated to effect a Change of Control or (ii) otherwise arose in connection with or in anticipation of a Change of Control.

  • Termination Period means the period of time beginning with a Change in Control and ending on the earlier to occur of (1) two years following such Change in Control or (2) the Executive’s death.

  • Termination Without Cause means a Separation as a result of a termination of the Executive’s employment by the Company without Cause and other than as a result of Disability.

  • Termination Option means the option of either party to terminate a transaction in the event that the other party fails to perform a Firm obligation to deliver Gas in the case of Seller or to receive Gas in the case of Buyer for a designated number of days during a period as specified on the applicable Transaction Confirmation.

  • Constructive Termination Without Cause means a termination of the Executive's employment at his initiative as provided in this Section 10(c) following the occurrence, without the Executive's written consent, of one or more of the following events (except as a result of a prior termination):

  • Complete Termination means a termination of the Fund's Rule 12b-1 plan for B-2 Shares involving the cessation of payments of the Distribution Fees, and the cessation of payments of distribution fees pursuant to every other Rule 12b-1 plan of the Fund for every existing or future B-Class-of-Shares (as hereinafter defined) and the Fund's discontinuance of the offering of every existing or future B-Class-of-Shares, which conditions shall be deemed satisfied when they are first complied with hereafter and so long thereafter as they are complied with prior to the earlier of (i) the date upon which all of the B-2 Shares which are Distributor Shares pursuant to Schedule I hereto shall have been redeemed or converted or (ii) May 31, 2005. For purposes of this Section 14.5, the term B-Class-of-Shares means each of the B-1 Class of Shares of the Fund, the B-2 Class of Shares of the Fund and each other class of shares of the Fund hereafter issued which would be treated as Shares under Schedule I hereto or which has substantially similar economic characteristics to the B-1 or B-2 Classes of Shares taking into account the total sales charge, CDSC or other similar charges borne directly or indirectly by the holder of the shares of such class. The parties agree that the existing C Class of Shares of the Fund does not have substantially similar economic characteristics to the B-1 or B-2 Classes of Shares taking into account the total sales charge, CDSC or other similar charges borne directly or indirectly by the holder of such shares. For purposes of clarity the parties to this agreement hereby state that they intend that a new installment load class of shares which may be authorized by amendments to Rule 6(c)-10 under the 1940 Act will be considered to be a B-Class-of-Shares if it has economic characteristics substantially similar to the economic characteristics of the existing B-1 or B-2 Classes of Shares taking into account the total sale charge, CDSC or other similar charges borne directly or indirectly by the holder of such shares and will not be considered to be a B-Class-of-Shares if it has economic characteristics substantially similar to the economic characteristics of the existing C Class of shares of the Fund taking into account the total sales charge, CDSC or other similar charges borne directly or indirectly by the holder of such shares.

  • Normal Termination means termination of employment or service with the Company and Affiliates: (i) by the Optionee; (ii) upon retirement; (iii) on account of death or Disability; or (iv) by the Company, a Subsidiary or Affiliate without Cause.

  • Termination for Good Reason means a Termination of Employment by Executive for a Good Reason.

  • Termination Option Event means an event of a kind defined as such in Section 4.1, 4.2 or 4.8.

  • Termination for Convenience means the termination of the Trade Contract Agreement or the Trade Contractor Work by the Authority without cause and for the convenience of the Authority as decided in its sole discretion.

  • Optional Termination The termination of the trust created hereunder in connection with the purchase of the Mortgage Loans pursuant to Section 9.01(a) hereof.

  • Termination for Just Cause means termination because of Executive’s personal dishonesty, incompetence, willful misconduct, breach of fiduciary duty involving personal profit, intentional failure to perform stated duties, willful violation of any law, rule or regulation (other than traffic violations or similar offenses) or final cease-and-desist order, or material breach of any provision of this Agreement.

  • Terminator As defined in Section 9.01.

  • Customer channel termination point means the location where the customer either inputs or receives the communications.

  • Termination Right have the respective meanings given in the PRA Contractual Stay Rules.

  • Partial Termination has the meaning set forth in the Section 6.3(a).