Time/temperature means the relationship between the length of time and the specific temperatures to which potentially hazardous foods are subjected during storage, transportation, preparation, cooking, reheating, dispensing, service, or sale.
High-temperature coating means a high performance coating labeled and formulated for application to substrates exposed continuously or intermittently to temperatures above 204oC (400oF).
Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.
Meters shall have the meaning set forth in Section 4.6(a) hereof.
Density means the permitted number of dwelling units per
Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.
Pressure means the total load or force per unit area acting on a surface.
medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV to 44 kV;
Meter means, unless otherwise qualified, a device that measures and registers the integral of an electrical quantity with respect to time.
Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.
Tolerance means a state of adaptation in which exposure to a drug induces changes that result in a diminution of one or more of the drug’s effects over time.
Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).
Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.
Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.
Calibration gas means a gas mixture used to calibrate gas analysers.
Design pressure means the hydrostatic pressure for which each structure or appliance assumed watertight in the intact and damage stability calculations is designed to withstand.
Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.
Outputs means the goods or services that are produced by an entity or other person;
Altitude means the vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL);
Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.
Ventilation means the supply of outside air into a building through window or other openings due to wind outside and convection effects arising from temperature, or vapour pressure differences (or both) between inside and outside of the building;
True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.
Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.
Output means the exposure rate, dose rate, or a quantity related in a known manner to these rates from a brachytherapy source or a teletherapy, remote afterloader, or gamma stereotactic radiosurgery unit for a specified set of exposure conditions.
Load means energy consumed by Customers together with allocated losses and unaccounted for energy;
Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.
Storage area means any location, facility, or vehicle which is used to store, to transport, or to secure a radiographic exposure device, a storage container, or a sealed source when it is not in use and which is locked or has a physical barrier to prevent accidental exposure, tampering with, or unauthorized removal of the device, container, or source.