Used Capacity definition

Used Capacity means school facility capacity consumed by preexisting development.
Sample 1
Used Capacity means [***].
Sample 1
Used Capacity. The actual traffic volume occurring over the territory. Reflects actual variation in traffic and operations that occur on the line.”
Sample 1

Examples of Used Capacity in a sentence

  • A physical core is considered Used Capacity if its daily average utilization is greater than 3%, as collected by the metering tools.

  • A Compute Unit is considered Used Capacity if it is allocated one or more times per day, as collected by the metering tools.

  • A server is considered Used Capacity if individual physical server device is powered on one or more times per day, as collected by the metering tools.

  • Improved Network Efficiency4G and 5G related: Coverage, Penetration, Used Capacity (monthly average data traffic per subscriber), Speed2.Cost reduction and efficiency gain pass through consumersUnit cost decrease and fair share pass through to retail prices (bucket view)Anticompetitive effects assessment 3.Excessive access or transfer pricing, incentive for foreclosureCost based and open transfer prices, 3rd party partnerships 4.

  • Further, the model estimates that 42% of the Used Capacity at Sports Halls in Lambeth is from non-residents.

  • It is usually lower than the practical capacity.•Available Capacity : It is the difference between the Used Capacity and the Practical Capacity.

  • For more details on calculating the Net Capacity, see Calculating Net Capacity (in terms of acreage) of Regional or Equivalent Facilities in Priority Watersheds below.• Used Capacity in terms of acres of the same land covers noted previously.• Remaining Capacity in terms of acres of the same land covers noted previously.• The flow control standard used to determine the facility’s capacity credit.

  • If you are an inmate of a correctional institution or under the custody of a law enforcement official, Women’s Center for Health may release the protected health information of inmates and others in law enforcement custody to the correctional institution or law enforcement official, where necessary (1) for the institution to provide you with health care; (2) to protect your health and safety or the health and safety of others; or (3) for the safety and security of the correctional institution.

  • Silk or its authorized agents shall connect the Solution to Silk’s Clarity™ software tool, which shall report certain information including, telemetry about usage, Used Capacity and Number of Active C-nodes, of the Solution to Silk.

  • Land cover totals in this summary sheet shall agree with the Used Capacity totals in Table 2.


More Definitions of Used Capacity

Used Capacity means, subject to Section 2.8, the sum of (a) the aggregate Investors Participation Capacity in (i) all Company Commercial Projects in which the Investors participate pursuant to Section 2.1 (other than Company Commercial Projects in which any Investors participate separately from this Agreement, provided that the Company expressly agrees in writing that such Investor participation (A) is not pursuant to this Agreement, and (B) shall not be included when calculating the Used Capacity), and (ii) all Commercial Projects in which the Investors participate pursuant to Section 2.2, plus (b) the aggregate Capacity of all Investors Capped Projects (net of any Company Participation Capacity therein), in each case whether such Commercial Project is in operation or subject to Binding Agreements.
Sample 1
Used Capacity means an InfiniGuard’s total storage capacity that is defined within the InfiniGuard Machine as “data size after reduction” and is the combined sum of the capacity used by all of the de-duplication engines (DDEs).
Sample 1
Used Capacity and “Number of Active C-nodes” has the meaning set forth in Exhibit A.
Sample 1
Used Capacity means the Customer’s actual usage of net physical storage as measured across all instances of the Solution used by Customer, including all instances on private and public cloud Servers.
Sample 1

Related to Used Capacity

  • Bid Capacity meanss capacity offered by the bidder in his Bid under invitation.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • Reserved Capacity means the maximum amount of capacity and energy that the Transmission Provider agrees to transmit for the Transmission Customer over the Transmission Provider’s Transmission System between the Point(s) of Receipt and the Point(s) of Delivery under Tariff, Part II. Reserved Capacity shall be expressed in terms of whole megawatts on a sixty (60) minute interval (commencing on the clock hour) basis.

  • Committed Capacity means that portion of the Capacity that is required to meet the Capacity Entitlements of Access Holders;

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Installed Capacity or 'IC’ means the summation of the name plate capacities of all the units of the generating station or the capacity of the generating station (reckoned at the generator terminals), approved by the Commission from time to time;

  • Unforced Capacity shall have the meaning specified in the Reliability Assurance Agreement.

  • indemnified capacity means any and all past, present and future service by an indemnified representative in one or more capacities as a director, officer, employee or agent of the corporation, or, at the request of the corporation, as a director, officer, employee, agent, fiduciary or trustee of another corporation, partnership, joint venture, trust, employee benefit plan or other entity or enterprise;

  • System Capacity means the operational capacity of the System at any applicable point in time.

  • Excess capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • New Capacity means a new Generator, a substantial addition to the capacity of an existing Generator, or the reactivation of all or a portion of a Generator that has been out of service for five years or more that commences commercial service after the effective date of this definition. For purposes of Section 23.4.5 of this Attachment H, “Offer Floor” for a Mitigated Capacity Zone Installed Capacity Supplier that is not a Special Case Resource shall mean the lesser of (i) a numerical value equal to 75% of the Mitigation Net CONE translated into a seasonally adjusted monthly UCAP value (“Mitigation Net CONE Offer Floor”), or (ii) the numerical value that is the first year value of the Unit Net CONE determined as specified in Section 23.4.5.7, translated into a seasonally adjusted monthly UCAP value using an appropriate class outage rate, (“Unit Net CONE Offer Floor”). The Offer Floor for a Mitigated Capacity Zone Installed Capacity Supplier that is a Special Case Resource shall mean a numerical value determined as specified in Section 23.4.5.7.5. The Offer Floor for Additional CRIS MW shall mean a numerical value determined as specified in Section 23.4.5.7.6. For the purposes of Section 23.4.5 of this Attachment H, “Non-Qualifying Entry Sponsors” shall mean a Transmission Owner, Public Power Entity, or any other entity with a Transmission District in the NYCA, or an agency or instrumentality of New York State or a political subdivision thereof.

  • Idle capacity means the unused capacity of partially used facilities. It is the difference between: (a) that which a facility could achieve under 100 percent operating time on a one-shift basis less operating interruptions resulting from time lost for repairs, setups, unsatisfactory materials, and other normal delays; and (b) the extent to which the facility was actually used to meet demands during the accounting period. A multi-shift basis should be used if it can be shown that this amount of usage would normally be expected for the type of facility involved.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Available Capacity means the capacity from the Project, expressed in whole megawatts, that is available to generate Product. [For As-Available Product facilities only]

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Maximum Capacity or ‘Pmax’ means the maximum continuous active power which a power-generating module can produce, less any demand associated solely with facilitating the operation of that power-generating module and not fed into the network as specified in the connection agreement or as agreed between the relevant system operator and the power-generating facility owner;

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Storage Capacity means any combination of space, injectability and deliverability.

  • Daily Unforced Capacity Obligation means the capacity obligation of a Load Serving Entity during the Delivery Year, determined in accordance with Reliability Assurance Agreement, Schedule 8, or, as to an FRR entity, in Reliability Assurance Agreement, Schedule 8.1. “Day-ahead Congestion Price” shall mean the Congestion Price resulting from the Day-ahead Energy Market.

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Nominal Capacity means the volume indicated by the manufacturer that represents the maximum recommended filling level.

  • Nameplate Capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Interruptible Capacity means capacity that may be interrupted by the Operator at any time in order to fulfil shippers’ nominations under a firm capacity reservation.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Nominal Rated Capability means the nominal maximum rated capability in megawatts of a Transmission Interconnection Customer’s Customer Facility or the nominal increase in transmission capability in megawatts of the Transmission System resulting from the interconnection or addition of a Transmission Interconnection Customer’s Customer Facility, as determined in accordance with pertinent Applicable Standards and specified in the Interconnection Service Agreement.