2008 Election Form Sample Clauses

2008 Election Form. On or before December 31, 2008, Employee may elect to defer the payment of the supplemental retirement benefit payable pursuant to Section 1 until the later of Employee’s Separation from Service or a specified date that qualifies as a specific time or fixed schedule pursuant to Treas. Reg. § 1.409A-3(i)(1). The election must be made on a form provided by Company and must be signed by Employee and delivered to Company on or before December 31, 2008. Employee may change his election regarding the commencement of his payments pursuant to this Section 8(a)(1) by filing a new form with Company prior to December 31, 2008. After December 31, 2008, Employee may change his election regarding the commencement of his payments only in accordance with Section 8(a)(2). If a revised election is not honored because it was not timely filed, distributions shall be made pursuant to the most recent valid election filed by Employee. If Employee makes an election pursuant to this Section 8(a)(1), the election will apply only if Employee’s benefit payments commence in 2009 or later. If, pursuant to the terms of this Agreement as in effect prior to the adoption of this restated Agreement, Employee’s benefit payments are to commence in 2008, any election made by Employee pursuant to this paragraph (1) shall be void and the amounts payable to Employee shall be paid at the time and in the manner described in the Agreement as in effect prior to this restatement.
Sample 1
AutoNDA by SimpleDocs

Related to 2008 Election Form

  • INSTRUCTIONS FOR COMPLETING REPAYMENT ELECTION FORM AND EXERCISING REPAYMENT OPTION Capitalized terms used and not defined herein have the meanings defined in the accompanying Repayment Election Form.

  • Deferral Election A Participant may elect to defer all or a specified percentage of the Compensation earned in a Plan Year by such Participant for serving as a member of the Board of any Participating Fund or as a member of any committee or subcommittee thereof. Reimbursement of expenses of attending meetings of the Board, committees of the Board or subcommittees of such committees may not be deferred. Such election shall be made by executing before the first day of such Plan Year such election notice as the Administrator may prescribe; provided, however, that upon first becoming eligible to participate in the Plan by reason of appointment to a Board, a Participant may file a Deferral Election not later than 30 days after the effective date of such appointment, which election shall apply to Compensation earned in the portion of the Plan Year commencing the day after such election is filed and ending on the last day of such Plan Year.

  • Initial Election The Director shall make an initial deferral election under this Agreement by filing with the Company a signed Election Form within 30 days after the Effective Date of this Agreement. The Election Form shall set forth the amount of Fees to be deferred and shall be effective to defer only Fees earned after the date the Election Form is received by the Company.

  • 83(b) Election You may make and file with the Internal Revenue Service an election under Section 83(b) of the Code with respect to the grant of the Restricted Shares hereunder, electing to include in your gross income as of the Grant Date the Fair Market Value of the Restricted Shares as of the Grant Date. You shall promptly provide a copy of such election to the Company. If you make and file such an election, you shall make such arrangements in accordance with Section 8 as are satisfactory to the Committee to provide for the timely payment of all applicable withholding taxes.

  • Beneficiary Designation The Participant may, from time to time, name any beneficiary or beneficiaries (who may be named contingently or successively) to whom any benefit under this Agreement is to be paid in case of his or her death before he or she receives any or all of such benefit. Each such designation shall revoke all prior designations by the Participant, shall be in a form prescribed by the Company, and will be effective only when filed by the Participant in writing with the Director of Human Resources of the Company during the Participant’s lifetime. In the absence of any such designation, benefits remaining unpaid at the Participant’s death shall be paid to the Participant’s estate.

  • Application Form To apply for a pole attachment or conduit occupancy license under this Agreement, Applicant shall submit to SWBT two signed copies of the appropriate application forms. SWBT represents that the forms specified in subsections (a)-(b) are forms in use prior to the effective date of this Agreement and that SWBT is in the process of revising such forms to conform to the provisions of this Agreement and to streamline the application process. The parties therefore agree that the forms specified in subsections (a) and (b) will be interim forms only. SWBT reserves the right to change the format and content of these forms upon 60 days written notice to Applicant. (a) To apply for a pole attachment license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make- Ready Authorization”) together with completed Form SW-9433 (“Pole Attachments”). An application for a pole attachment license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9433 and SW-9434 are attached to this Agreement as parts of APPENDIX III. (b) To apply for a conduit occupancy license, Applicant shall submit to SWBT two signed copies of SWBT’s Form SW-9434 (“Access Application and Make-Ready Authorization”) together with completed Form SW-9435 (“Conduit Occupancy”). An application for a conduit occupancy license will not be complete or subject to processing by SWBT until these forms have been submitted to SWBT; provided, however, that such forms will be deemed to be substantially complete if they contain the information specified in subsections (c)-(h) below, as applicable. Copies of Forms SW-9434 and SW-9435 are attached to this Agreement as parts of APPENDIX III. (c) Each application for a license under this Agreement shall include, at a minimum, the following information: (1) the poles, ducts, and conduits (including all manholes) along Applicant’s proposed route to or within which Applicant desires to attach or place its facilities; (2) a description of the facilities to be attached to SWBT’s poles and a description of the facilities to be placed within each component of SWBT’s conduit system (including but not limited to ducts, conduits, manholes, and handholes) along the proposed route; (3) for poles, the proposed points of attachment; (4) for building entrance or building distribution ducts or conduits or other space within a building, a conspicuous statement, as required by Section 5.06 of this Agreement, that the application pertains to a building entrance or building distribution duct or conduit or other space within a building; (5) if applicable, a conspicuous notation that the space requested is not to be assigned (or billed) to Applicant until SWBT has received Applicant’s written instruction to make such assignment or issued a license authorizing Applicant to occupy the space requested; and (6) if applicable, a conspicuous statement that Applicant intends to occupy the space before the issuance of a license, as provided in Section 8.03 of this Agreement. (d) Facilities descriptions which apply to multiple pole attachments or conduit occupancies need only be described once on any form. Facilities descriptions shall include, at a minimum, the following information: (1) the number and types of cables, including the physical size (diameter) and weight (weight per foot); (2) the number and types of strands, if any, which will be used to support the cables, including the rated holding capacity expressed in thousand pound increments (e.g., 2.2M) of such strands; and (3) sufficient information to identify and describe the physical characteristics (size, dimensions, and weight) of apparatus enclosures and other facilities to be attached to SWBT’s poles or placed in SWBT’s conduit system. (e) When it appears to Applicant that facilities modification, capacity expansion, or make-ready work may be required to accommodate Applicant’s access requests, Applicant shall describe the facilities modification, capacity expansion, or make-ready work which Applicant proposes. Applicant shall also describe its plans, if any, to use any infrequent construction technique or connectivity solution authorized under Section 6.03 to avoid high or unusual expenditures and state its reasons for the use of such technique or solution. (f) Applicant acknowledges that the poles along a particular pole line or route may include poles owned by firms (such as electric utilities) other than SWBT, that it may be necessary for SWBT to rearrange its facilities or perform other make-ready work on poles other than poles it owns or controls in order to accommodate Applicant’s request for access to SWBT’s poles and that, at the time an application is submitted, it may be difficult for Applicant to determine with certainty whether a particular pole is owned or controlled by SWBT or by another entity. Accordingly, the application shall, to the extent feasible, identify all poles utilized by SWBT (without regard to ownership) along Applicant’s proposed route. (g) Each application for a license under this Agreement shall be accompanied by a construction schedule showing Applicant’s projected dates for beginning and completing construction at the sites specified in the application. Information on this schedule may be used by SWBT’s engineering and outside plant construction personnel in scheduling work required to process Applicant’s applications and scheduling such capacity expansions, make- ready work, and facilities modifications, if any, as may be necessary to accommodate Applicant’s facilities. (h) Applicant may include multiple cables in a single license application and may provide multiple services (e.g., CATV and non-CATV services) under the same cable sheath or jacket. When both CATV and non-CATV services are provided under the same cable sheath or jacket, or CATV and non-CATV services are provided using different cables attached or lashed to the same strand or otherwise occupying the same space on a pole or the same duct or inner duct within a conduit, Applicant will so advise SWBT and SWBT shall, if permitted by law, adjust its charges to enable SWBT to charge Applicant the rate applicable to telecommunications carriers rather than the rate applicable to cable television systems solely to provide cable service.

  • Resume Self-Certification Form When submitting a response to an RFQ the Contractor shall submit with its response a completed and signed Resume Self-Certification Form (Contract Exhibit F) to the Customer for each proposed Staff member identified in the RFQ response.

  • Section 83(b) Election Purchaser understands that Section 83(a) of the Code, taxes as ordinary income the difference between the amount paid for the Stock and the fair market value of the Stock as of the date any restrictions on the Stock lapse. In this context, "restriction" includes the right of the Company to buy back the Stock pursuant to the Repurchase Option set forth in Section 2(a) above. Purchaser understands that Purchaser may elect to be taxed at the time the Stock is purchased, rather than when and as the Repurchase Option expires, by filing an election under Section 83(b) of the Code (an "83(b) Election") with the Internal Revenue Service in the form attached hereto as Exhibit C within thirty (30) days from the date the Stock is purchased. Even if the fair market value of the Stock at the time of the execution of this Agreement equals the amount paid for the Stock, the 83(b) Election must be made to avoid income under Section 83(a) of the Code in the future. Purchaser understands that failure to file such an 83(b) Election in a timely manner may result in adverse tax consequences for Purchaser. Purchaser further understands that an additional copy of such 83(b) Election is required to be filed with his or her federal income tax return for the calendar year in which the date of this Agreement falls. Purchaser acknowledges and understands that it is solely Purchaser's obligation and responsibility to timely file such 83(b) Election, and neither the Company nor the Company's legal or financial advisors shall have any obligation or responsibility with respect to such filing. Purchaser acknowledges that the foregoing is only a summary of the effect of United States federal income taxation with respect to purchase of the Stock hereunder and does not purport to be complete. Purchaser further acknowledges that the Company has directed Purchaser to seek independent advice regarding the applicable provisions of the Code, the income tax laws of any municipality, state or foreign country in which Purchaser may reside, and the tax consequences of Purchaser's death. Purchaser assumes all responsibility for filing an 83(b) Election and paying all taxes resulting from such election or the lapse of the restrictions on the Stock.

  • Beneficiary Designation: Change The Executive shall designate a Beneficiary by completing and signing the Beneficiary Designation Form and delivering it to the Plan Administrator or its designated agent. The Executive’s Beneficiary designation shall be deemed automatically revoked if the Beneficiary predeceases the Executive or if the Executive names a spouse as Beneficiary and the marriage is subsequently dissolved. The Executive shall have the right to change a Beneficiary by completing, signing, and otherwise complying with the terms of the Beneficiary Designation Form and the Plan Administrator’s rules and procedures, as in effect from time to time. Upon the acceptance by the Plan Administrator of a new Beneficiary Designation Form, all Beneficiary designations previously filed shall be cancelled. The Plan Administrator shall be entitled to rely on the last Beneficiary Designation Form filed by the Executive and accepted by the Plan Administrator before the Executive’s death.

  • Beneficiary Designations The Executive shall designate a beneficiary by filing a written designation with the Company. The Executive may revoke or modify the designation at any time by filing a new designation. However, designations will only be effective if signed by the Executive and accepted by the Company during the Executive's lifetime. The Executive's beneficiary designation shall be deemed automatically revoked if the beneficiary predeceases the Executive, or if the Executive names a spouse as beneficiary and the marriage is subsequently dissolved. If the Executive dies without a valid beneficiary designation, all payments shall be made to the Executive's estate.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!