Safety and Security Procedures Contractor shall maintain and enforce, at the Contractor Work Locations, industry-standard safety and physical security policies and procedures. While at each JBE Work Location, Contractor shall comply with the safety and security policies and procedures in effect at such JBE Work Location.
Packaging and Shipping All shipping containers shall be packed and packaged to: (i) ensure safe arrival to final destination; (ii) secure the lowest transportation costs;(iii) comply with requirements of common carriers; (iv) meet Buyer's written instructions; and (v) meet the requirements of all applicable laws, ordinances, rules and regulations.
HEALTH, SAFETY AND ENVIRONMENT In the performance of this Contract, Contractor and Operator shall conduct Petroleum Operations with due regard to health, safety and the protection of the environment (“HSE”) and the conservation of natural resources, and shall in particular:
Health, Safety and Security 14.1 The Employer recognizes a responsibility to provide an environment intended to protect the health, safety and security of Members as they carry out their responsibilities. To that end, the Employer agrees:
(a) to maintain a Joint Health and Safety Committee (the JHSC) with broad representation drawn from all sectors of the University, including at least one (1) person appointed by the Association;
(b) to cooperate with the Association in making every reasonable provision for the safety, health and security of Members;
(c) to take reasonable measures to maintain the security of the buildings and grounds while at the same time maintaining reasonable access for Members who have a need for such access at times other than during regular working hours;
(d) to ensure that the Association has the right to appoint at least one (1) person to any representative committee whose terms of reference specifically include the health, safety or security of Members as they carry out their responsibilities;
(e) to comply with the Occupational Health and Safety Act, R.S.O. 1990, and relevant regulations thereto, as amended from time to time (the “Act”);
(f) that Members may refuse unsafe work pursuant to and in accordance with the relevant provisions of the Act for so doing;
(g) that Members report any known or potential dangers to their Xxxx;
(h) In addition, the Employer agrees:
i) to provide Members with health and safety training, personal protective equipment, and access to health and safety programs, policies and procedures;
ii) to provide resources for the JHSC;
iii) to compensate a CASBU Member who is eligible to be, and serves as, the person appointed by the Association to the JHSC when that service is outside the period of the Member’s contract;
iv) to provide training for the person appointed by the Association to the JHSC directly related to their duties and responsibilities in connection with the JHSC;
v) to recognize a JHSC Member’s right to be present during workplace safety testing and audits and receive written copies of any reports and recommendations from the testing/audits and a copy of a draft report if one is provided to the Employer;
vi) to recognize a JHSC Member’s right to have advance notice when advance notice is given by the Ministry of Labour of any Ministry of Labour inspection and to accompany a Ministry of Labour Inspector during an inspection and receive a copy of any report produced by the inspector.
14.2 The parties agree that all personal communications must adhere to the Personal Harassment and Discrimination Policy and the Nipissing University Acceptable Use Policy. Effective June 10, 2006, universities are subject to the Freedom of Information and Protection of Privacy Act (FIPPA). All records in the custody and control of the University will be subject to FIPPA with exceptions as defined by the Act. Persons may request and have a right to access University information or records. A record is defined under the Act as any record of information however recorded, whether in printed or electronic form, film, or otherwise and includes drafts, post-it notes, margin notes, hard drive files, emails, voice mails, electronic agendas, address books, and recording devices.
14.3 Unless required under FIPPA, and for the purposes of this Article, files are documents under a Member’s control and stored on University property, either in paper or electronic form. Such files do not include the Member’s official file in the Xxxx’x office nor the Personnel File of the Member in the Human Resources office.
14.4 On termination of a Member’s employment for any reason other than cause, the Employer will permit, by appointment only, accompanied access for a period of fifteen (15) working days (or longer with the agreement of the Xxxx) by the former Member or the Member’s executors to the Member’s files, whether in paper or electronic format. The purpose of the allowed access is for transferring required documents to other faculty, the Chair, or the Xxxx. Where files are not required to support continued student academic needs or ongoing operational requirements, the former Member or designate may remove or destroy their personal files. Items that are clearly of a personal nature or are owned by the former Member such as furniture, pictures, books, etc., may be removed at this time.
SHIPPING AND SHIPPING COSTS All delivered Equipment and Products must be properly packaged. Damaged Equipment and Products may be rejected. If the damage is not readily apparent at the time of delivery, Supplier must permit the Equipment and Products to be returned within a reasonable time at no cost to Sourcewell or its Participating Entities. Participating Entities reserve the right to inspect the Equipment and Products at a reasonable time after delivery where circumstances or conditions prevent effective inspection of the Equipment and Products at the time of delivery. In the event of the delivery of nonconforming Equipment and Products, the Participating Entity will notify the Supplier as soon as possible and the Supplier will replace nonconforming Equipment and Products with conforming Equipment and Products that are acceptable to the Participating Entity. Supplier must arrange for and pay for the return shipment on Equipment and Products that arrive in a defective or inoperable condition. Sourcewell may declare the Supplier in breach of this Contract if the Supplier intentionally delivers substandard or inferior Equipment or Products.
DELIVERY, STORAGE, AND HANDLING The Contractor shall be responsible to inspect all components on delivery to ensure that no damage occurred during shipping or handling for furnish and installation projects. For equipment only purchases, the ordering entity shall be responsible to inspect all components on delivery. Materials must be stored in original undamaged packaging in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism, and theft until ready for installation.
Safety and Security Contractor is responsible for maintaining safety in the performance of this Agreement. Contractor shall be responsible to ascertain from the District the rules and regulations pertaining to safety, security, and driving on school grounds, particularly when children are present.
SHIPPING AND AIR TRANSPORT 1. Profits of an enterprise of a Contracting State from the operation of ships or aircraft in international traffic shall be taxable only in that State.
2. The provisions of paragraph 1 shall also apply to profits from the participation in a pool, a joint business or an international operating agency.
New Hampshire Specific Data Security Requirements The Provider agrees to the following privacy and security standards from “the Minimum Standards for Privacy and Security of Student and Employee Data” from the New Hampshire Department of Education. Specifically, the Provider agrees to:
(1) Limit system access to the types of transactions and functions that authorized users, such as students, parents, and LEA are permitted to execute;
(2) Limit unsuccessful logon attempts;
(3) Employ cryptographic mechanisms to protect the confidentiality of remote access sessions;
(4) Authorize wireless access prior to allowing such connections;
(5) Create and retain system audit logs and records to the extent needed to enable the monitoring, analysis, investigation, and reporting of unlawful or unauthorized system activity;
(6) Ensure that the actions of individual system users can be uniquely traced to those users so they can be held accountable for their actions;
(7) Establish and maintain baseline configurations and inventories of organizational systems (including hardware, software, firmware, and documentation) throughout the respective system development life cycles;
(8) Restrict, disable, or prevent the use of nonessential programs, functions, ports, protocols, and services;
(9) Enforce a minimum password complexity and change of characters when new passwords are created;
(10) Perform maintenance on organizational systems;
(11) Provide controls on the tools, techniques, mechanisms, and personnel used to conduct system maintenance;
(12) Ensure equipment removed for off-site maintenance is sanitized of any Student Data in accordance with NIST SP 800-88 Revision 1;
(13) Protect (i.e., physically control and securely store) system media containing Student Data, both paper and digital;
(14) Sanitize or destroy system media containing Student Data in accordance with NIST SP 800-88 Revision 1 before disposal or release for reuse;
(15) Control access to media containing Student Data and maintain accountability for media during transport outside of controlled areas;
(16) Periodically assess the security controls in organizational systems to determine if the controls are effective in their application and develop and implement plans of action designed to correct deficiencies and reduce or eliminate vulnerabilities in organizational systems;
(17) Monitor, control, and protect communications (i.e., information transmitted or received by organizational systems) at the external boundaries and key internal boundaries of organizational systems;
(18) Deny network communications traffic by default and allow network communications traffic by exception (i.e., deny all, permit by exception);
(19) Protect the confidentiality of Student Data at rest;
(20) Identify, report, and correct system flaws in a timely manner;
(21) Provide protection from malicious code (i.e. Antivirus and Antimalware) at designated locations within organizational systems;
(22) Monitor system security alerts and advisories and take action in response; and
(23) Update malicious code protection mechanisms when new releases are available.
Shipping Axon may make partial shipments and ship Axon Devices from multiple locations. All shipments are FOB shipping point via common carrier. Title and risk of loss pass to Agency upon Axon’s delivery to the common carrier. Agency is responsible for any shipping charges in the Quote.