ACCEPTANCE AND INSTALLATION Sample Clauses

ACCEPTANCE AND INSTALLATION. 3.1 The Subscriber acknowledges that the basis of this Agreement is that: 3.1.1 The Subscriber shall at its own cost ensure that the Premises is suitable for the installation, use and accommodation of the Equipment; 3.1.2 If the Subscriber is not the owner of the Premises on which the Equipment will be installed, it is the Subscribers responsibility to ensure they have received have received written authorisation from the owner to install the equipment at the premises, prior to installation; 3.1.3 In order to facilitate delivery, the Subscriber shall grant Access to the Premises to allow for installation (and subsequently for repair and maintenance) of the Equipment. Should the Subscriber fail to grant access BBnet shall not be responsible for non-provision of Services consequently. 3.2 All risk of loss and damage in and to the Equipment shall from the date of delivery to the Subscriber vest with the Subscriber, 3.3 BBnet will make every possible endeavor to maintain constant access to the Service and ensure that it is available for use by the Subscriber. However, BBnet cannot be held responsible for accidental non-availability for outages of services, or for unforeseen interruptions to service. 3.4 Some installations may incur an increase in installation price to reflect the man hours and labour in order to bring broadband to an area or location which would normally be difficult or impossible to facilitate.
Sample 1
AutoNDA by SimpleDocs
ACCEPTANCE AND INSTALLATION. Final inspection of goods and services provided under this BOA will be performed at the Contractor's facility and subject to acceptance. Acceptance of goods and services under this BOA occurs at the time of delivery to the Contractor’s facility.
Sample 1
ACCEPTANCE AND INSTALLATION. XXXXXX shall inspect the Equipment upon the receipt thereof and shall thereafter deliver immediately to LESSOR the DELIVERY ACCEPTANCE & INSTALLATION CERTIFICATE attached to this Lease, fully executed by XXXXXX'S authorized representative. LESSEE shall be responsible for all costs of installation. Upon such written acceptance, XXXXXX agrees that it shall be conclusively presumed, as between XXXXXX and XXXXXX, that the LESSEE has fully inspected and acknowledged that the Equipment is in good condition and repair.
Sample 1
ACCEPTANCE AND INSTALLATION. 3.1 This Agreement shall come into force if the Subscriber’s order is accepted by Ripplecom. Taking payment from your credit or debit card does not indicate acceptance. Acceptance of your order takes place at the point where such offer is expressly accepted by us by commencing Services. 3.2 If Ripplecom accepts your order, it will provide the Services to you from the date the Service is activated. Your use of the Service shall be deemed to be an acceptance by you of these terms and conditions. 3.3 You warrant that any information provided by you when placing your order is up-to-date, accurate in all material respects and is sufficient for us to fulfil your order; and that you have the legal capacity to enter into a contract. You are responsible for maintaining and promptly updating your account information as necessary to ensure accuracy and completeness. 3.4 Any prices, quotations and descriptions made or referred to on the Ripplecom website are subject to availability, do not constitute an offer and may be withdrawn or revised at any time prior to our acceptance of your order. 3.5 While Ripplecom will make reasonable efforts to facilitate the efficient processing of your order, your order may be rejected (without liability) if for any reason Ripplecom is unable to process or fulfil your order. 3.6 The Subscriber acknowledges that the basis of this Agreement is that: 3. 6.1 The Subscriber shall, at its own cost, ensure that the Premises are suitable for the installation, use, accommodation and preservation of the Equipment; 3. 6.2 Insofar as the Subscriber is not the owner of the Premises on which the Equipment is and/or will be installed, the Subscriber warrants to Ripplecom that the Subscriber has received unconditional authorisation from such owner to install the Equipment at the Premises. The Subscriber acknowledges and agrees that he shall fully and effectively indemnify, and keep indemnified, Ripplecom against all losses, damages, costs and expenses incurred by Ripplecom as a result of the Subscriber’s breach of this warranty; and;
Sample 1
ACCEPTANCE AND INSTALLATION. 3.1 This Agreement shall come into force if the Subscriber’s order is accepted by Ripplecom. Taking payment from your credit or debit card does not indicate acceptance. Acceptance of your order takes place at the point where such offer is expressly accepted by us by dispatching the Equipment/commencing Services. 3.2 If your credit card is debited before the contract is formed, and if your order is ultimately rejected, we will refund any monies debited from your credit card less an administration fee. If Ripplecom accepts your order, it will provide the Services to you from the date the Service is activated. Your use of the Service shall be deemed to be an acceptance by you of these terms and conditions. 3.3 You warrant that any information provided by you when placing your order is up-to-date, accurate in all material respects and is sufficient for us to fulfil your order; and that you have the legal capacity to enter into a contract. You are responsible for maintaining and promptly
Sample 1

Related to ACCEPTANCE AND INSTALLATION

  • Delivery and Installation Delivery 7.1 Provided the conditions in clause 1.5 have been satisfied, we must, or must procure, the delivery of the System to the Premises. 7.2 The risk of loss or theft of, or damage to, the System passes to you on delivery of the System to the Premises.

  • Equipment Installation In order to meet its obligations under this Agreement, a Party that owns, rents, or leases equipment (the equipment owner) may require installation of such equipment on property owned by another Party (the property owner), provided that the property is being used for an electric utility purpose and that the property owner shall not be required to do so if it would thereby be prevented from performing its own obligations or exercising its rights under this Agreement.

  • Delivered and Installed Off loaded, and installed. Installation shall include but not limited to; any and all labor, material, and tools necessary to install furniture in accordance with approved plans and specifications and/or the direction of authorized agency personnel. The installation company will be responsible for the removal of any trash, packing material, and cartons associated with their installation. The contractor/installation company will repair/replace (to the satisfaction of the ordering entity) any damage to the building or its’ contents that they (the contractor) caused in the course of their work. This includes but is not limited to: walls, floors, floor coverings, ceilings, elevators, doors, doorways, and any existing fixtures and furniture. The agency may withhold payment until repairs are satisfactorily completed.

  • Maintenance Repairs Utility Installations Trade Fixtures and Alterations (a) Section 8.1(a) is amended in its entirety to read as follows: Subject to the provisions of Sections 8.2, 10, and 15, Tenant shall, at Tenant's sole cost and expense and at all times, keep the Building Complex and every part thereof in good order, condition and repair (whether or not the need for such repairs occurs as a result of Tenant's use, any prior use, the elements or the age of such portion of the Building Complex), including, without limiting the generality of the foregoing, plumbing, electrical lighting facilities, boilers, fired or unfired pressure vessels, fire hose connections, fixtures, interior walls, exterior walls, roof, ceilings, floors, windows, doors, plate glass, and skylights, parking areas and lighting, driveways, sidewalks, landscaping, irrigation systems, and subject to Section 8.1(b) below, heating, air conditioning and ventilating systems, but excluding any items which are the responsibility of Landlord pursuant to Section 8.2 below. Tenant, in keeping the Building Complex in good order, condition and repair, shall exercise and perform good maintenance practices, including, without limitation, providing janitorial services to the Building Complex substantially equivalent to those attached hereto as Exhibit I and, snow, ice and trash removal service. Tenant's obligations shall include restorations, replacements or renewals when necessary to keep the Building Complex and all improvements thereon or a part thereof in good order, condition and state of repair. (b) Section 8.1(b) is amended in its entirety to read as follows: Tenant shall procure and pay the cost of a contract for maintenance of the heating, air conditioning and ventilating systems for the Building Complex with a reputable contractor licensed in the State of Colorado and reasonably satisfactory to Landlord. (c) Section 8.1(c) is amended to replace, in both places where it is used, the word "Premises" with the words "Building Complex" and to add the words "including, without limitation, the Premises," before the words "after twenty". (d) Section 8.2 is amended in its entirety to read as follows:

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the equipment or parts in the required locations at no additional charge, unless otherwise specified in the Price Sheets. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the equipment or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the equipment or parts in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • No Renovation or Installation The alteration or renovation of the Residence facilities, furniture, fixtures, or equipment supplied in the Room is not permitted. The lock(s) provided by the Institution are the only locks to be used to secure the door to the Room. No other locks may be installed by the Resident and the Resident may not change the keying of the lock(s) which are provided. Unauthorized changes to temperature settings or duct or diffuser settings in the Room, and any attempt to make changes to the heating system in the Room are prohibited. The Resident may not install any electrical equipment which will overload the capacity of a circuit. Altering or otherwise tampering with electrical systems is prohibited. The Resident may not install furnishings or equipment of any kind (including and not limited to; shelving, light fixtures, audio or visual equipment, satellite dishes and radio or television antenna(e)), without the prior written consent of the Manager. If any such furnishing or equipment is installed without the Manager’s consent, the Resident will immediately remove it after notice from the Manager, failing which the Manager may remove the furnishing or equipment at the expense of the Resident without further notice and without liability to the Resident for any damage to the furnishing or equipment so removed. The Resident is responsible to pay the costs of repairing all damage to the Room or Residence caused by the installation and removal of any furnishing or equipment installed by the Resident, whether installed with or without the Manager’s consent. The Resident also is liable for any damage to property of others and for any injury to or death of any person caused by the installation, existence or removal of any furnishing or equipment installed by the Resident, whether installed with or without the Manager’s consent.

  • Installation Waiver Company will waive the one-time installation charges associated with the implementation of Services within the 48 contiguous States of the U.S. provided under this Agreement except for the following services: (i) eDSL, (ii) VPN, (iii) Internet Dedicated OC3, OC12, OC48, Gig-E, (iv) PTT / third party services (including International Access and Company International), (v) Data Center, (vi) Paging, (vii) Managed Services, (viii) CPE, (ix) Enhanced Call Routing, (x) Local Disaster Recovery, (xi) Audio, Video and Net Conferencing, (xii) Voice over IP Services, (xiii) Security Services, (xiv) Non-Listing/Non-Published Service, (xv) Telecommunications Service Priority, and (xvi) Services provided by Company incumbent local exchange carriers (“ILECs”) or by Cellco Partnership and its affiliates d/b/a Company Wireless. Usage charges, monthly recurring charges, expedite charges, change charges, surcharges, charges for an unlisted or non-published number, any charges imposed by third parties (including access, egress, jack, or wiring charges), taxes or tax-like surcharges, or other Governmental Charges will not be waived.

  • Installation of Equipment You represent that there are no legal, contractual or similar restrictions on the installation of the Equipment in the location(s) you have authorized. It is your responsibility to ensure compliance with all applicable building codes, zoning ordinances, homeowners’ association rules, covenants, conditions, and restrictions related to the Service, to pay any fees or other charges, and to obtain any permits or authorizations necessary for the installation or use of the Service (collectively "Legal Requirements"). You are solely responsible for any fines or similar charges for violation of any applicable Legal Requirements. You acknowledge and agree that Viasat or its designated service provider will be required to access your premises and computer to install and maintain the Equipment, including, without limitation, the antenna and its components. Standard Equipment installations performed by Viasat-authorized installers include: (i) installation of the antenna to an outside wall or sloped roof; (ii) travel to and from your Service location within 50 miles of the installer’s office; (iii) cable routed through one exterior wall and one interior wall or floor; (iv) connection of the antenna to the modem using up to 150 feet of cable; (v) connection of the modem to one computer using up to 7 feet of cable; and (vi) required mounting and cabling hardware. Any different or additional installation services or hardware are non-standard and may result in additional charges to be agreed upon between you and the installer. All installations include attaching the Equipment to your computer, installing software on your computer and configuring your computer to optimize the performance of the Internet Service. You confirm that you have reviewed the installation plan and agreed to any associated charges. If you approved a roof mount, you acknowledge the potential risks associated with this type of installation (including, without limitation, with respect to any warranty that applies to your roof or roof membrane). By signing this Agreement, scheduling one or more service or installation visits, and permitting us or our service provider to enter your home, you are authorizing Viasat and its service provider to perform all of the above actions. You are responsible for backing up the data on your computer and we highly recommend that you do so prior to permitting access to us or one of our designated service providers. NEITHER VIASAT NOR ITS SERVICE PROVIDER SHALL HAVE ANY LIABILITY WHATSOEVER FOR ANY LOSSES RESULTING FROM THE EQUIPMENT OR ANY INSTALLATION, REPAIR OR OTHER SERVICES ASSOCIATED WITH THE EQUIPMENT, INCLUDING WITHOUT LIMITATION, DAMAGE TO YOUR PREMISES OR LOSS OF SOFTWARE, DATA OR OTHER INFORMATION FROM YOUR COMPUTER. This limitation does not apply to any damages arising from the gross negligence or willful misconduct of us or one of our designated service providers. Time frames for installation, if any, are not guaranteed and may vary depending on the types of services requested and other factors.

  • Installations Any special carpentry, wiring, electrical or other work, gas, steam, water and drainage connection shall be installed at Exhibitor’s expense, and in accordance with the building and Management’s direction.

  • Licenses for Permanent Installation The contractor must comply with all State mandatory licensing requirements prior to installation. Questions on licensing requirements should be directed to the State Licensing Board. Contractor must furnish and install all furniture and materials in compliance with all applicable codes, whether local, state, or federal; and that all permits or licenses required for installation will be obtained without cost to the State.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!