Access and Use 1. Each Party shall ensure that any service supplier of the other Party is accorded access to and use of public telecommunications transport networks and services in a timely fashion, on transparent, reasonable and nondiscriminatory terms and conditions. This obligation shall be applied, inter alia, through paragraphs 2 through 6. 2. Each Party shall ensure that service suppliers of the other Party have access to and use of any public telecommunications transport network or service offered within or across the border of that Party, including private leased circuits, and to this end shall ensure, subject to the provisions of paragraphs 5 and 6, that such suppliers are permitted: (a) to purchase or lease and attach terminal or other equipment which interfaces with the network and which is necessary to supply their services; (b) to interconnect private leased or owned circuits with public telecommunications transport networks and services or with circuits leased or owned by other service suppliers; (c) to use operating protocols of their choice in the supply of any service, other than as necessary to ensure the availability of telecommunications transport networks and services to the public generally; and (d) to perform switching, signaling and processing functions.
3. Each Party shall ensure that service suppliers of the other Party may use public telecommunications transport networks and services for the movement of information
4. Notwithstanding the provisions of paragraph 3, a Party may take such measures as are necessary: (a) to ensure the security and confidentiality of messages; or (b) to protect the personal data of users of public telecommunications transport networks or services, subject to the requirement that such measures are not applied in a manner which would constitute a means of arbitrary or unjustifiable discrimination or a disguised restriction on trade in services. 5. Each Party shall ensure that no condition is imposed on access to and use of public telecommunications transport networks and services other than as necessary: (a) to safeguard the public service responsibilities of suppliers of public telecommunications transport networks and services, in particular their ability to make their networks or services available to the public generally; or (b) to protect the technical integrity of public telecommunications transport networks or services.
Business Use Coverage is provided if the BUSINESS USE surcharge has been paid as specified on YOUR DECLARATION PAGE. Eligibility is limited to the following: cars, trucks and vans used for route sales, inspections, maintenance, repair, landscaping, carrying tools to a job site and eligible vehicles owned by religious / charitable organizations.
Data Use Each party may use Connected Account Data in accordance with this Agreement and the consent (if any) each obtains from each Connected Account. This consent includes, as to Stripe, consent it receives via the Connected Account Agreement.
Additional Access Rights For the avoidance of doubt any grant of Access Rights not covered by the Grant Agreement or this Consortium Agreement shall be at the absolute discretion of the owning Party and subject to such terms and conditions as may be agreed between the owning and receiving Parties.
Access to Work Locations Reasonable access to employee work locations shall be granted officers of the Association and their officially designated representatives for the purpose of processing grievances or contacting members of the Association concerning business within the scope of representation. Such officers or representatives shall not enter any work location without the consent of the City Manager. Access shall be restricted so as not to interfere with the normal operations of the department or with established safety or security requirements. Solicitation of membership and activities concerned with the internal management of the Association, such as collecting dues, holding membership meetings, campaigning for office, conducting elections and distributing literature, shall not be conducted during working hours.
Access to NID 2.7.3.1 NewPhone may access the customer’s premises wiring by any of the following means and NewPhone shall not disturb the existing form of electrical protection and shall maintain the physical integrity of the NID:
2.7.3.1.1 BellSouth shall allow NewPhone to connect its Loops directly to BellSouth’s multi-line residential NID enclosures that have additional space and are not used by BellSouth or any other telecommunications carriers to provide service to the premises;
2.7.3.1.2 Where an adequate length of the customer’s premises wiring is present and environmental conditions permit, either Party may remove the customer premises wiring from the other Party’s NID and connect such wiring to that Party’s own NID;
2.7.3.1.3 Either Party may enter the subscriber access chamber or dual chamber NID enclosures for the purpose of extending a cross-connect or spliced jumper wire from the customer premises wiring through a suitable “punch-out” hole of such NID enclosures; or
2.7.3.1.4 NewPhone may request BellSouth to make other rearrangements to the customer premises wiring terminations or terminal enclosure on a time and materials cost basis.
2.7.3.2 In no case shall either Party remove or disconnect the other Party’s loop facilities from either Party’s NIDs, enclosures, or protectors unless the applicable Commission has expressly permitted the same and the disconnecting Party provides prior notice to the other Party. In such cases, it shall be the responsibility of the Party disconnecting loop facilities to leave undisturbed the existing form of electrical protection and to maintain the physical integrity of the NID. It will be NewPhone’s responsibility to ensure there is no safety hazard, and NewPhone will hold BellSouth harmless for any liability associated with the removal of the BellSouth Loop from the BellSouth NID. Furthermore, it shall be the responsibility of the disconnecting Party, once the other Party’s loop has been disconnected from the NID, to reconnect the disconnected loop to a nationally recognized testing laboratory listed station protector, which has been grounded as per Article 800 of the National Electrical Code. If no spare station protector exists in the NID, the disconnected loop must be appropriately cleared, capped and stored.
2.7.3.3 NewPhone shall not remove or disconnect ground wires from BellSouth’s NIDs, enclosures, or protectors.
2.7.3.4 NewPhone shall not remove or disconnect NID modules, protectors, or terminals from BellSouth’s NID enclosures.
2.7.3.5 Due to the wide variety of NID enclosures and outside plant environments, BellSouth will work with NewPhone to develop specific procedures to establish the most effective means of implementing this section if the procedures set forth herein do not apply to the NID in question.
Permitted Uses BA shall use Protected Information only for the purpose of performing BA’s obligations under the Contract and as permitted or required under the Contract and Addendum, or as required by law. Further, BA shall not use Protected Information in any manner that would constitute a violation of the Privacy Rule or the HITECH Act if so used by CE. However, BA may use Protected Information as necessary (i) for the proper management and administration of BA;
Access Control Supplier will maintain an appropriate access control policy that is designed to restrict access to Accenture Data and Supplier assets to authorized Personnel. Supplier will require that all accounts have complex passwords that contain letters, numbers, and special characters, be changed at least every 90 days, and have a minimum length of 8 characters.
Access to Work District representatives shall at all times have access to the Work, wherever it is, in preparation or in progress. Contractor shall provide safe and proper facilities for such access.
Other Uses Even if Customer opts out of PEP, the Software monitors, records, and reports to Sage information about the installation and use of the Software, including, but not limited to, information about Customer’s devices and the frequency, type, and manner of use to which the Software is put. Customer acknowledges that Sage may collect, use, and disclose the information as described in the Sage Privacy Notice posted at xxxxx://xxx.xxxx.xxx/en-us/legal/privacy-and-cookies/ (if you are contracting with Sage Software, Inc.) or xxxxx://xxx.xxxx.xxx/en-ca/legal/privacy-and-cookies/ (if you are contracting with Sage Software Canada Ltd.), or such other URL as Sage may notify Customer of, and as may be described in the user interface associated with the applicable features.
