Ambient temperature. For the measurement of electrical and photometric characteristics, the headlamp shall be operated in dry and still atmosphere at an ambient temperature of 23 °C ± 5 °C.
Ambient temperature. For the measurement of electrical and photometric characteristics, the front fog lamp shall be operated in dry and still atmosphere at an ambient temperature of 23 °C ± 5 °C.
Ambient temperature. For the measurement of electrical and photometric characteristics, the device shall be operated in a dry and still atmosphere at an ambient temperature of 23 °C ± 5 °C.
Ambient temperature. For the measurement of electrical and photometric characteristics, the AFS shall be operated in a dry and still atmosphere at an ambient temperature of 23 °C ± 5 °C.
Ambient temperature. The ambient temperature shall be between 0 °C and 40 °C.
Ambient temperature. For tests requested by Xxxxx (and not for any CAISO‑initiated test, which shall occur when directed by XXXXX), the average ambient temperature, based on an aggregate of 1-minute resolution data collected throughout the SCT, must be within the range of 8 – 33 degrees Celsius.
Ambient temperature. Ratings should be based on the ambient conditions as defined in Appendix A to this procedure.
Ambient temperature. 4.2.1 System Normal Extreme DMS-MTX/NT Cell Site 50 to 86 deg. F 41 to 120 deg. F Conditions above or below the normal tolerance for more than 72 consecutive hours and 15 days maximum per year are considered extreme. The rate of change shall not exceed 15 degrees F per hour. Ambient Temperature is measured at a point 5 feet above floor level and either mid-aisle or 15" in front of the equipment, whichever is less.
4.2.2 Storage Ambient Temperature: -40 to 160 deg. F.
Ambient temperature. The EEAAD shall function installed in a parachute system exposed to temperatures from –30 to 140 degrees Fahrenheit [T]. The EEAAD shall function installed in a parachute system exposed to temperatures from –65 to 145 degrees Fahrenheit [O]. C-3.2.17 APA 9 – Self Test. The EEAAD shall have self-test and fault identification capability [T]. The EEAAD shall display error messages for identified faults [O]. C-3.2.18 APA 10 – System Turn-Off. The EEAAD shall have manual turn-off and automatic turn-off capability when not in use [T]. System shall possess a visual alert 15 minutes prior to automatic shut-off [O].
Ambient temperature. The temperature of the surrounding air. For testing purposes, ambient temperature must be between 16 °C (50 °F) and 38 °C (100 °F).
