Additional Procedures Once initiated by an Auction Notice, the Borrowers may withdraw a Dutch Auction by written notice to the Auction Manager no later than 24 hours before the original Expiration Time so long as no Qualifying Bids have been received by the Auction Manager at or prior to the time the Auction Manager receives such written notice from the Borrower Representative. Any Return Bid (including any component bid thereof) delivered to the Auction Manager may not be modified, revoked, terminated or cancelled; provided that a Term Loan Lender may modify a Return Bid at any time prior to the Expiration Time solely to reduce the Reply Price included in such Return Bid. However, a Dutch Auction shall become void if the Borrowers fail to satisfy one or more of the conditions to the purchase of Term Loans set forth in, or to otherwise comply with the provisions of Section 10.6(c) of the Second Lien Credit and Guaranty Agreement. The purchase price for all Term Loans purchased in a Dutch Auction shall be paid in cash by the Borrowers directly to the respective assigning Term Loan Lender on a settlement date as determined by the Auction Manager in consultation with the Borrowers (which shall be no later than ten (10) Business Days after the date Return Bids are due), along with accrued and unpaid interest (if any) on the applicable Term Loans up to the settlement date. The Borrowers shall execute each applicable Auction Assignment and Acceptance received in connection with a Qualifying Bid. All questions as to the form of documents and validity and eligibility of Term Loans that are the subject of a Dutch Auction will be determined by the Auction Manager, in consultation with the Borrowers, and the Auction Manager’s determination will be conclusive, absent manifest error. The Auction Manager’s interpretation of the terms and conditions of the Offer Document, in consultation with the Borrowers, will be final and binding. None of the Administrative Agent, the Auction Manager, any other Agent or any of their respective Affiliates assumes any responsibility for the accuracy or completeness of the information concerning the Borrowers, the Restricted Subsidiaries or any of their Affiliates contained in the Offer Documents or otherwise or for any failure to disclose events that may have occurred and may affect the significance or accuracy of such information. The Auction Manager acting in its capacity as such under a Dutch Auction shall be entitled to the benefits of the provisions of Sections 9, 10.2 and 10.3 of the Second Lien Credit and Guaranty Agreement to the same extent as if each reference therein to the “Administrative Agent” were a reference to the Auction Manager, each reference therein to the “Credit Documents” were a reference to the Offer Documents, the Auction Notice and Auction Assignment and Acceptance and each reference therein to the “Transactions” were a reference to the transactions contemplated hereby and the Administrative Agent shall cooperate with the Auction Manager as reasonably requested by the Auction Manager in order to enable it to perform its responsibilities and duties in connection with each Dutch Auction. This Appendix C shall not require any Borrower or any Restricted Subsidiary to initiate any Dutch Auction, nor shall any Term Loan Lender be obligated to participate in any Dutch Auction.
1. Not later than the date that is three Business Days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), Corsair Memory (Cayman) Ltd. shall have transferred to Corsair Components, Inc., all of the Equity Interests of Corsair Components, Inc. owned by Corsair Memory (Cayman) Ltd. and such Equity Interests shall have been converted into treasury shares, or such Equity Interests shall have been cancelled.
2. Not later than the date that is 20 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), the Administrative Agent shall have received evidence, in form and substance reasonably satisfactory to it, that (i) the HK Process Agent has accepted the appointment by the Borrower Representative and/or Holdings for a period ending one year after the Term Loan Maturity Date and (ii) all fees in connection with such appointment, if any, have been paid for the entire term of such appointment.
3. Not later than the date that is 30 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), the Administrative Agent shall have received, all Delayed Approvals, Guarantees and Security that were not delivered by the Credit Parties on or prior to the Closing Date pursuant to Section 3.1(r) of the Agreement.
4. Not later than the date that is 30 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), the Administrative Agent shall have received all lender’s loss payable and additional insured endorsements as described in and required by Section 5.5, in form and substance reasonably satisfactory to the Administrative Agent.
5. Not later than the date that is 45 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), the Administrative Agent shall have received, an amendment to the Organizational Documents of Corsair Components Limited removing any restrictions with respect to any pledge of its Equity Interests owned by Corsair (Hong Kong) Limited or any other Person as collateral security for the Obligations, in form and substance reasonably satisfactory to the Administrative Agent.
6. Not later than the date that is 30 days after the Closing Date (or such later date as the Administrative Agent may agree in its sole discretion), (a) Corsair Components B.V. shall have been wound up or dissolved, (b) all of Corsair Components B.V.’s business, property and assets shall have been conveyed, sold, leased, transferred or otherwise disposed of, in one transaction or a series of transactions, to another Credit Party and (c) the Administrative Agent shall have received one or more Foreign Collateral Documents duly executed and delivered by each applicable Credit Party as may be required by the Administrative Agent in order to create, perfect and establish a first priority Lien on all of the Equity Interests of Corsair (Hong Kong) Limited as Collateral for the Obligations, unless prior to such date, the Administrative Agent shall have received (i)(A) a Counterpart Agreement duly executed and delivered by Corsair Components B.V., (B) one or more applicable Collateral Documents, agreements, instruments, approvals or other documents required under Section 5.11 with respect to new Subsidiaries of Holdings to create, perfect and establish a first priority Lien on all of the Equity Interests of Corsair Components B.V. and all property and assets of Corsair Components B.V. as Collateral for the Obligations.
Claim Procedures Claim forms or claim information as to the subject policy can be obtained by contacting Benmark, Inc. (800-544-6079). When the Named Fiduciary has a claim which may be covered under the provisions described in the insurance policy, they should contact the office named above, and they will either complete a claim form and forward it to an authorized representative of the Insurer or advise the named Fiduciary what further requirements are necessary. The Insurer will evaluate and make a decision as to payment. If the claim is payable, a benefit check will be issued in accordance with the terms of this Agreement. In the event that a claim is not eligible under the policy, the Insurer will notify the Named Fiduciary of the denial pursuant to the requirements under the terms of the policy. If the Named Fiduciary is dissatisfied with the denial of the claim and wishes to contest such claim denial, they should contact the office named above and they will assist in making an inquiry to the Insurer. All objections to the Insurer's actions should be in writing and submitted to the office named above for transmittal to the Insurer.
Grievance Procedures The AGENCY agrees to establish a formal written grievance process with procedures through which clients and recipients of services may present grievances to the governing authority of the AGENCY regarding services being provided under this Contract. Additionally, the AGENCY agrees to establish fair hearing procedures that ensure all persons will be advised of their rights to a fair hearing to appeal a denial or exclusion from services and/or the failure of staff to take into account the individual’s choice of service. The AGENCY’S internal grievance procedure must document and include, at a minimum, the following: date of grievance, a written response to the applicant sent within thirty (30) days, and the opportunity for the applicant to meet with the AGENCY Executive Director or designee. Upon request by the COUNTY, the AGENCY shall provide a written report as to the grievance outcome within five (5) normal COUNTY working days. The AGENCY will maintain these documents on file for review by the COUNTY.
Operational Procedures In order to minimize operational problems, it will be necessary for trade information to be supplied in a secure manner by the Subadviser to the Fund’s Service Providers, including: JPMorgan Chase Bank, National Association (the “Custodian”), Virtus Fund Services (the “Fund Administrator”) BNY Mellon Investment Servicing (US) Inc., (the “Sub-Accounting Agent”), any Prime Broker to the Series, and all other Counterparties/Brokers as required. The Subadviser must furnish the Fund’s service providers with required daily information as to executed trades in a format and time-frame agreed to by the Subadviser, Custodian, Fund Administrator, Sub-Accounting Agent and Prime Broker/Counterparties and designated persons of the Fund. Trade information sent to the Custodian, Fund Administrator, Sub-Accounting Agent and Prime Broker/Counterparties must include all necessary data within the required timeframes to allow such parties to perform their obligations to the Series. The Sub-Accounting Agent specifically requires a daily trade blotter with a summary of all trades, in addition to trade feeds, including, if no trades are executed, a report to that effect. Daily information as to executed trades for same-day settlement and future trades must be sent to the Sub-Accounting Agent no later than 4:30 p.m. (Eastern Time) on the day of the trade each day the Fund is open for business. All other executed trades must be delivered to the Sub-Accounting Agent on Trade Date plus 1 by Noon (Eastern Time) to ensure that they are part of the Series’ NAV calculation. (The Subadviser will be responsible for reimbursement to the Fund for any loss caused by the Subadviser’s failure to comply with the requirements of this Schedule A.) On fiscal quarter ends and calendar quarter ends, all trades must be delivered to the Sub-Accounting Agent by 4:30 p.m. (Eastern Time) for inclusion in the financial statements of the Series. The data to be sent to the Sub-Accounting Agent and/or Fund Administrator will be as agreed by the Subadviser, Fund Administrator, Sub-Accounting Agent and designated persons of the Fund and shall include (without limitation) the following:
Safety Procedures The Contractor shall:
(a) comply with all applicable safety regulations according to Attachment H;
(b) take care for the safety of all persons entitled to be on the Site;
(c) use reasonable efforts to keep the Site and Works clear of unnecessary obstruction so as to avoid danger to these persons;
(d) provide fencing, lighting, guarding and watching of the Works until completion and taking over under clause 10 [Employer's Taking Over]; and
(e) provide any Temporary Works (including roadways, footways, guards and fences) which may be necessary, because of the execution of the Works, for the use and protection of the public and of owners and occupiers of adjacent land.
Referral Procedures Section 1. For Local Unions now having a job referral system as contained in their Collective Bargaining Agreement, the Contractor agrees to utilize such system and it shall be used exclusively by such Contractor, except as it may be modified by this Article. Referrals shall not be affected by obligations of Union membership or the lack thereof. Where airport security clearance requirements apply to work to be performed, the Contractor shall inform the Union’s hiring hall dispatcher of those requirements when requesting workers.
Section 2. In the event that Local Unions are unable to fill any request for employees within the time specified by the local CBAs the Contractor may employ applicants from any other available source. The Contractor shall inform the Union of the name and social security number of any applicants hired from other sources and shall refer the applicant to the Local Union for dispatch to the projects prior to the commencement of work.
Section 3. There shall be no discrimination against any employee or applicant for employment because of his/her membership or non-membership in the union or based upon race, creed, color, sex, age or national origin, or any other legally protected class of such employee or applicant.
Section 4. No employee covered by this Agreement shall be required to join any Union as a condition of being employed on the project; provided, however, that an employee who is a member of the referring union at the time of the referral shall maintain that membership while employed under the Agreement. All employees shall, however, be required to comply with the union security provision of the applicable Collective Bargaining Agreement, for the period during which they are performing on-site work, except as modified by this Agreement. The Contractor agrees to deduct union dues or representation fees, whichever is applicable, from the pay of any employee who executes a voluntary authorization for such deductions and to remit the dues to the Union or Council.
Section 5. The parties agree that where a Contractor is not party to a current Collective Bargaining Agreement with the Union having jurisdiction over the affected work, the Contractor may request by name, and the Local will honor, referral of up to a maximum of five (5) persons per each contractor (“core” employees), provided that the Contractor first demonstrate that those persons possess the following qualifications:
(1) Any license required by state or federal law for the project work to be performed;
(2) Have worked a total of at least one thousand (1,000) hours in the construction craft during the prior three (3) years;
(3) Were on the Contractor’s active payroll for at least sixty (60) out of the one hundred eighty (180) calendar days prior to the contract award;
(4) Have the ability to perform the work safely. The Contractor may elect to hire its first “core” employee to be a xxxxxxx. After the contractor hires his first core employee, the Union will refer to such contractor one journeyman employee from the hiring hall out-of–work list for the affected trade or craft, then refer one of such Contractor’s “core” employees as a journeyman, and shall, alternate, one core employee and one employee from the out-of-work list, until such Contractor’s crew requirements are met or until such Contractor has hired five (5) “core” employees, whichever occurs first. Thereafter, all additional employees in the affected trade or craft shall be hired exclusively from the hiring hall out-of-work list(s). For the duration of the Contractor’s work the ratio of “core” employees to hiring hall referrals shall be maintained and when the Contractor’s workforce is reduced, employees shall be reduced in the same ratio as was applied in the initial hiring. All employees, core and union, shall be dispatched from the appropriate union. Trust benefits shall be paid on all employees, core and union.
Section 6. Upon referral or dispatch from a Union, “turnaround” or refusal of any worker by the Contractors, requires written explanation from the Contractor that shall be communicated from the Prime Contractor to the Port and affected Union within 48 hours.
Section 7. Individual seniority will not be recognized or applied to employees working on the project. This provision will not interfere with or supersede the use by individual Contractors of “call lists” maintained by such Contractor pursuant to addenda to the local Collective Bargaining Agreement between such Contractor and a Union signatory to this Agreement.
Section 8. The selection of craft foremen and/or general foremen and the number of such foremen and/or general foremen required shall be entirely the responsibility of the Contractor. Craft foremen shall be designated working foremen at the request of the Contractor. Craft workers covered by this Agreement will, in the normal day- to-day operations, take their direction and supervision from their xxxxxxx.
Quality Control Procedures The Seller shall have an internal quality control program that verifies, on a regular basis, the existence and accuracy of the legal documents, credit documents, property appraisals, and underwriting decisions. The program shall include evaluating and monitoring the overall quality of the Seller's loan production and the servicing activities of the Seller. The program is to ensure that the Mortgage Loans are originated and serviced in accordance with Accepted Servicing Standards and the Underwriting Guidelines; guard against dishonest, fraudulent, or negligent acts; and guard against errors and omissions by officers, employees, or other authorized persons.
Direct Claim Procedures In the event an Indemnified Party has a claim for indemnity under Section 7.02 against the Indemnifying Party that does not involve a Third Party Claim, the Indemnified Party agrees to give notice in writing of such claim to the Indemnifying Party. Such notice shall set forth in reasonable detail such claim and the basis for indemnification (taking into account the information then available to the Indemnified Party). The failure to so notify the Indemnifying Party shall not relieve the Indemnifying Party of its obligations hereunder, except to the extent such failure shall have actually materially and adversely prejudiced the Indemnifying Party. If the Indemnifying Party does not notify the Indemnified Party within thirty (30) days following the receipt of a notice with respect to any such claim that the Indemnifying Party disputes its indemnity obligation to the Indemnified Party for any Losses with respect to such claim, such Losses shall be conclusively deemed a liability of the Indemnifying Party and the Indemnifying Party shall promptly pay to the Indemnified Party any and all Losses arising out of such claim. If the Indemnifying Party has timely disputed its indemnity obligation for any Losses with respect to such claim, the parties shall proceed in good faith to negotiate a resolution of such dispute and, if not resolved through such negotiations, such dispute shall be resolved by arbitration determined pursuant to Section 9.06.
WARRANTY PROCEDURES You need proof of purchase for warranty service.
DISCIPLINARY AND GRIEVANCE PROCEDURES 16.1 The Employee is subject to the Company's disciplinary and grievance procedures, copies of which are available from the Group HR Manager. These procedures do not form part of the Employee's contract of employment.
16.2 If the Employee wants to raise a grievance, he may apply in writing to the CEO in accordance with the Company's grievance procedure.
16.3 If the Employee wishes to appeal against a disciplinary decision, he may apply in writing to the CEO in accordance with the Company's disciplinary procedure.
16.4 The Company may suspend the Employee from any or all of his duties for no longer than is necessary to investigate any disciplinary matter involving the Employee or so long as is otherwise reasonable while any disciplinary procedure against the Employee is outstanding.
16.5 During any period of suspension:
a) the Employee shall continue to receive his basic salary and all contractual benefits in the usual way and subject to the terms of any benefit arrangement;
b) the Employee shall remain an employee of the Company and bound by the terms of this agreement;
c) the Employee shall ensure that the CEO knows where he will be and how he can be contacted during each working day (except during any periods taken as holiday in the usual way);
d) the Company may exclude the Employee from his place of work or any other premises of the Company; and
e) the Company may require the Employee not to contact or deal with (or attempt to contact or deal with) any officer, employee, consultant, client, customer, supplier, agent, distributor, shareholder, adviser or other business contact of the Company.
