Governing Provisions This Agreement is made under and subject to the provisions of the Plan, and all of the provisions of the Plan are also provisions of this Agreement. If there is a difference or conflict between the provisions of this Agreement and the provisions of the Plan, the provisions of the Plan will govern. By signing this Agreement, the Grantee confirms that he or she has received a copy of the Plan.
Overriding Provisions (a) Any Transfer or attempted Transfer of any Units in violation of this Agreement (including any prohibited indirect Transfers) shall be, to the fullest extent permitted by applicable law, null and void ab initio, and the provisions of Sections 10.05 and 10.06 shall not apply to any such Transfers. For the avoidance of doubt, any Person to whom a Transfer is made or attempted in violation of this Agreement shall not become a Member and shall not have any other rights in or with respect to any rights of a Member of the Company with respect to the applicable Units. The approval of any Transfer in any one or more instances shall not limit or waive the requirement for such approval in any other or future instance. The Manager shall promptly amend the Schedule of Members to reflect any Permitted Transfer pursuant to this Article X.
(b) Notwithstanding anything contained herein to the contrary (including, for the avoidance of doubt, the provisions of Section 10.01 and Article XI and Article XII), in no event shall any Member Transfer any Units to the extent such Transfer would:
(i) result in the violation of the Securities Act, or any other applicable federal, state or foreign Laws;
(ii) cause an assignment under the Investment Company Act;
(iii) in the reasonable determination of the Manager, be a violation of or a default (or an event that, with notice or the lapse of time or both, would constitute a default) under, or result in an acceleration of any obligation under any Credit Agreement to which the Company or the Manager is a party; provided that the payee or creditor to whom the Company or the Manager owes such obligation is not an Affiliate of the Company or the Manager;
(iv) be a Transfer to a Person who is not legally competent or who has not achieved his or her majority of age under applicable Law (excluding trusts for the benefit of minors);
(v) reasonably be expected to create a material risk that the Company could be treated as a “publicly traded partnership” or could be taxed as a corporation pursuant to Section 7704 of the Code or any successor provision thereto under the Code (as determined in the sole discretion of the Manager); or
(vi) reasonably be expected to create a material risk that the Company would have more than one hundred (100) partners, within the meaning of Treasury Regulations Section 1.7704-1(h)(1) (determined pursuant to the rules of Treasury Regulations Section 1.7704-1(h)(3)) (as determined in the sole discretion of the Manager); provided, for the avoidance of doubt, that in determining whether a Transfer creates a material risk that the Company would have more than one hundred (100) partners, the Manager may assume in its sole discretion the admission of any number of future additional Members.
(c) Notwithstanding anything contained herein to the contrary, in no event shall any Member that is not a “United States person” within the meaning of Section 7701(a)(30) of the Code Transfer any Units, unless such Member and the transferee have delivered to the Company, in respect of the relevant Transfer, written evidence that all required withholding under Section 1446(f) of the Code will have been done and duly remitted to the applicable taxing authority or duly executed certifications (prepared in accordance with the applicable Treasury Regulations or other authorities) of an exemption from such withholding.
(d) Without limiting any of the foregoing, and notwithstanding any other provision of this Agreement to the contrary, no Member shall Transfer any Units during the 2021 taxable year of the Company unless such Transfer either (x) qualifies as a “block transfer” under Treasury Regulations Section 1.7704-1(e)(2), or (y) is disregarded pursuant to Treasury Regulations Sections 1.7704-1(e)(1)(ii).
(e) For the avoidance of doubt, in the event that a Member (or such Member’s estate) attempts to Transfer any Units in connection with the death, disability, incapacity, dissolution, bankruptcy, insolvency or termination of such Member, such Transfer shall, to the extent it is in violation of this Agreement (unless otherwise waived by the Manager), be void ab initio and the provisions of Sections 10.05 and 10.06 shall not apply to any such Transfers, such that such Member (or such Member’s estate) remains the owner of the applicable Units.
(f) In the event that, notwithstanding this Section 10.07 or any other provision in this Agreement, a Transfer is required pursuant to applicable Law, immediately prior to such Transfer, the Units subject to such Transfer shall be redeemed in accordance with the provisions of Section 11.01 and Section 11.05, as applicable, such that in no event shall the transferee in respect of such Transfer become a Member of the Company at any time.
Remaining Provisions Except as expressly modified by this Amendment, the Employment Agreement shall remain in full force and effect. This Amendment embodies the entire agreement and understanding of the parties hereto with respect to the subject matter hereof, and supersedes all prior and contemporaneous agreements and understandings, oral or written, relative thereto.
Transitional Provisions 24.1. As from the official date of entry into force of the 01 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 01 series of amendments.
24.2. As from 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 01 series of amendments to this Regulation.
24.3. Type approvals of components other than fuel rail, as defined in paragraph 4.72., granted according to the original version of this Regulation or of components granted according to the 01 series of amendments, shall remain valid and shall be accepted for the purpose of their installation on vehicles as long as the requirements for the specific component have not changed by any series of amendments.
24.4. As from 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 01 series of amendments to this Regulation.
24.5. Until 12 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the type of components to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.6. Until 18 months after the date of entry into force of the 01 series of amendments to this Regulation, Contracting Parties applying this Regulation can continue to grant type approvals for the vehicle type to the original version of this Regulation without taking into account the provisions of the 01 series of amendments.
24.7. Notwithstanding the provisions of paragraphs 24.5. and 24.6., Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 01 series of amendments to this Regulation.
24.8. As from the official date of entry into force of the 02 series of amendments to this Regulation, no Contracting Party applying this Regulation shall refuse to grant or refuse to accept type approval under this Regulation as amended by the 02 series of amendments.
24.9. As from 1 September 2017 Contracting Parties applying this Regulation shall grant approvals only if the type of components to be approved meets the requirements of Part I of this Regulation as amended by the 02 series of amendments to this Regulation.
24.10. As from 1 September 2018 Contracting Parties applying this Regulation shall grant approvals only if the vehicle type to be approved meets the requirements of Part II of this Regulation as amended by the 02 series of amendments to this Regulation.
24.11. As from 1 September 2019 Contracting Parties applying this Regulation may refuse to recognize approvals of a type of vehicle which have not been granted in accordance with Part II of this Regulation as amended by the 02 series of amendments to this Regulation.
24.12. Contracting Parties applying this Regulation shall not refuse to grant extensions of type approvals for existing types of component or vehicle types which have been issued according to this Regulation without taking into account the provisions of the 02 series of amendments to this Regulation. 24.13. Notwithstanding paragraphs 24.11. and 24.12., Contracting Parties applying this Regulation shall continue to accept type approvals granted to the preceding series of amendments, which are not affected by the 02 series of amendments.
Concluding provisions Section 7.1 - Entire Agreement. All prior understandings, letters of intent, and agreements between the parties are merged in and superseded by this Agreement (including all Exhibits hereto).
CLOSING PROVISIONS (a) Subscriber agrees to be identified as a customer of JetBrains and agrees that JetBrains may refer to Subscriber by name, trade name and trademark, if applicable, and may briefly describe Subscriber’s business in JetBrains marketing materials, on JetBrains Site, and in public or legal documents. Subscriber hereby grants JetBrains a worldwide, non- exclusive, royalty-free license to use Subscriber’s name and any of Subscriber’s trade names and trademarks solely pursuant to this marketing section.
(b) This Agreement is governed by the laws of the Czech Republic. All disputes arising from the present Agreement and/or in connection with it shall be finally brought to and decided by any relevant competent common court in the Czech Republic. The parties agree that the United Nations Convention on Contracts for the International Sale of Goods does not apply to this Agreement.
(c) JetBrains may modify this Agreement at any time by posting a revised version of the Agreement on JetBrains Site. The modified terms will become effective upon posting of a revised version of the Agreement on JetBrains Site. By continuing to use Service after the effective date of any modification to this Agreement, Subscriber agrees to be bound by the modified terms. It is Subscriber’s responsibility to check JetBrains Site regularly for modifications to this Agreement.
(d) The parties are independent contractors. This Agreement does not create a partnership, franchise, joint venture, agency, or a fiduciary or employment relationship between the parties.
(e) Sections 7, 8, 9, 10, 12 (c), 12(d), 14(a), 14(b), and 14(c) shall survive any termination or expiration of this Agree- ment.
(f) There are no third-party beneficiaries to this Agreement.
(g) If any provision of this Agreement is held by a court of competent jurisdiction to be contrary to law, the provision shall be modified by the court and interpreted so as best to accomplish the objectives of the original provision to the fullest extent permitted by law, and the remaining provisions of this Agreement shall remain in effect.
Transition Provisions Any person engaged as an apprentice at the date this award commenced operation shall be deemed to be an apprentice for all purposes of this award until the completion or cancellation of their apprenticeship contract.
Plan Provisions In addition to the terms and conditions set forth herein, the Award is subject to and governed by the terms and conditions set forth in the Plan, as may be amended from time to time, which are hereby incorporated by reference. Any terms used herein with an initial capital letter shall have the same meaning as provided in the Plan, unless otherwise specified herein. In the event of any conflict between the provisions of the Agreement and the Plan, the Plan shall control.
Transitional Provision Schedule 3.2 contains a schedule of certain letters of credit issued for the account of the Borrower prior to the Closing Date. Subject to the satisfaction of the conditions contained in Sections 5.1 and 5.2, from and after the Closing Date such letters of credit shall be deemed to be Letters of Credit issued pursuant to this Article III.
Insurance Terms and Conditions Company must maintain the following limits and coverages uninterrupted or amended through the term of this Agreement. In the event Company becomes in default of the following requirements, Authority reserves the right to take whatever actions it deems necessary to protect its interests. Required liability policies other than Workers’ Compensation / Employer’s Liability will provide that Authority, members of Authority’s governing body, and Authority’s officers, volunteers and employees are included as additional insureds.
