Delivery and Payment Delivery of and payment for the Underwritten Securities and the Option Securities (if the option provided for in Section 2(b) hereof shall have been exercised on or before the third Business Day immediately preceding the Closing Date) shall be made on the date and at the time specified in Schedule I hereto or at such time on such later date not more than three Business Days after the foregoing date as the Representatives shall designate, which date and time may be postponed by agreement between the Representatives and the Company or as provided in Section 9 hereof (such date and time of delivery and payment for the Securities being herein called the “Closing Date”). Delivery of the Securities shall be made to the Representatives for the respective accounts of the several Underwriters against payment by the several Underwriters through the Representatives of the purchase price thereof to or upon the order of the Company by wire transfer payable in same-day funds to an account specified by the Company. Delivery of the Underwritten Securities and the Option Securities shall be made through the facilities of The Depository Trust Company unless the Representatives shall otherwise instruct. If the option provided for in Section 2(b) hereof is exercised after the third Business Day immediately preceding the Closing Date, the Company will deliver the Option Securities (at the expense of the Company) to the Representatives, at 000 Xxxxxxxxx Xxxxxx, Xxx Xxxx, Xxx Xxxx, xx the date specified by the Representatives (which shall be within three Business Days after exercise of said option) for the respective accounts of the several Underwriters, against payment by the several Underwriters through the Representatives of the purchase price thereof to or upon the order of the Company by wire transfer payable in same-day funds to an account specified by the Company. If settlement for the Option Securities occurs after the Closing Date, the Company will deliver to the Representatives on the settlement date for the Option Securities, and the obligation of the Underwriters to purchase the Option Securities shall be conditioned upon receipt of, supplemental opinions, certificates and letters confirming as of such date the opinions, certificates and letters delivered on the Closing Date pursuant to Section 6 hereof.
Xxxx Delivery and Presentment This feature is for the presentment of electronic bills only and it is your sole responsibility to contact your Billers directly if you do not receive your statements. In addition, if you elect to activate one of the Xxxx Payment Service’s electronic xxxx options, you also agree to the following:
BILLING PROCEDURES AND PAYMENT COMMERCE shall reimburse the Contractor for eligible Project expenditures, up to the maximum payable under this Contract. When requesting reimbursement for expenditures made, Contractor shall submit all Invoice Vouchers and any required documentation electronically through COMMERCE’s Contracts Management System (CMS), which is available through the Secure Access Washington (SAW) portal. If the Contractor has constraints preventing access to COMMERCE’s online A-19 portal, a hard copy A-19 form may be provided by the COMMERCE Project Manager upon request. The voucher must be certified by an official of the Contractor with authority to bind the Contractor. The final voucher shall be submitted to COMMERCE no later than November 15, 2020. COMMERCE will pay Contractor upon acceptance of services provided and receipt of properly completed invoices, which shall be submitted to the Representative for COMMERCE not more often than monthly. The invoices shall describe and document, to COMMERCE's satisfaction, reimbursable expenditures as set forth under the Scope of Work (Attachment A) and Budget & Invoicing (Attachment B). The invoice shall include the Contract Number as stated on the Face Sheet. Each voucher must be accompanied by an A-19 Certification (Attachment C) and A-19 Activity Report (Attachment D). The A-19 Certification must be certified by an authorized party of the Contractor to certify and attest all expenditures submitted on the voucher are in compliance with the United States Treasury Coronavirus Relief Fund (“Fund”) Guidance for State, Territorial, Local, and Tribal Governments: xxxxx://xxxx.xxxxxxxx.xxx/system/files/136/Coronavirus-Relief-Fund-Guidance-for-State-Territorial-Local- and-Tribal-Governments.pdf The A-19 Activity Report must be submitted which describes, in Excel spreadsheet and narrative form, a detailed breakdown of the expenditures within each applicable budget sub-category identified in the voucher, as well as a report of expenditures to date. COMMERCE will not release payment for any reimbursement request received unless and until the A-19 Certification and A-19 Activity Report is received. After approving the Invoice Voucher, A-19 Certification and Activity Report, COMMERCE shall promptly remit a warrant to the Contractor. Payment shall be considered timely if made by COMMERCE within thirty (30) calendar days after receipt of properly completed invoices. Payment shall be sent to the address designated by the Contractor. COMMERCE may, in its sole discretion, terminate the Contract or withhold payments claimed by the Contractor for services rendered if the Contractor fails to satisfactorily comply with any term or condition of this Contract. No payments in advance or in anticipation of services or supplies to be provided under this Agreement shall be made by COMMERCE.
Fees and Payment for Purchased Services Fees, Invoicing and Payment. Customer will pay all fees specified in the BOM. Unless otherwise quoted, only Alepo cloud licenses & SAAS services are include and priced in $USD. On-premise hardware, OS & third- party software is the responsibility of the SI/Reseller if relevant or the end customer, unless otherwise purchased from Alepo. All invoices are due upon its receipt.
CONTRACT AMOUNT AND PAYMENT FOR SERVICES 5.1 Fiscal Year 2020 Contract Amount. The total amount of HHSC's share of this Contract for fiscal year 2020 shall not exceed $3,615,665.86. LIDDA's share of this Contract for fiscal year 2020, the local match, is $289,027.35. The total value of this Contract for fiscal year 2020 shall not exceed $3,904,693.21.
Ordering of Other UNE Services 2.9.4.1 All LSRs issued for reserved facilities shall reference the facility reservation number as provided by BellSouth. Choice Telephone Company will not be billed any additional LMU charges for the loop ordered on such LSR. If, however, Choice Telephone Company does not reserve facilities upon an initial LMUSI, Choice Telephone Company’s placement of an order for an advanced data service type facility will incur the appropriate billing charges to include service inquiry and reservation per Exhibit B of this Attachment.
Billing and Payment Procedure for Forest Products Delivered The State will compute and forward to Purchaser a billing statement of charges for forest products delivered during the billing period at the delivered rate shown in P- 028.2 clause. After receipt of the billing statement, Purchaser’s payment must be received by the Department of Natural Resources on or before the due date shown on the billing statement. Purchaser agrees to make payment, payable to the Department of Natural Resources. Failure to pay on time for forest products delivered is considered a breach of contract. Included with the billing statement will be a summary report for the billing period compiled by the State or their log and load reporting service. The State will adjust final xxxxxxxx to account for any State approved payment reductions. P-080 Payment Account Refund Advance payments made under P-045 or P-045.2 remaining on account above the value for the charges shall be returned to Purchaser within 30 days following the final report of charges. Refunds not made within the 30 day period will accrue interest at the interest rate, as established by WAC 000-000-000, computed on a daily basis until paid.
PAYMENT FOR GOODS AND SERVICES a. DIR Customer shall comply with Chapter 2251, Texas Government Code, or applicable local law, in making payments to the Vendor. Payment under a DIR Contract shall not foreclose the right to recover wrongful payments.
Payment for Forest Products Delivered Purchaser agrees to pay the State for delivered forest products at the following rate: $0.00/MBF $250.00/MBF for incorrect species delivery* $20/mbf for Utility logs (Adjusted Gross). Purchaser agrees to increase the above delivered payment rate as approved by the State in the event the location of delivery is changed per the G-026.2 clause. Purchaser will not be billed for any delivered logs that are scaled as containing metal. *When two or more log sorts from this project are delivered to the same destination, the species contained in them are not eligible for the species price reduction. P-036.2 Missorts and Payment Reduction for Delivered Forest Products Forest Products delivered that do not meet the sorting specifications in G-022.2 are considered mis-sorts. Purchaser receiving mis-sort Forest Products is required to pay the State at the bid price under this contract. However, when mis-sorted Forest Products amount to more than 5% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-sort threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-sort payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-sort price reduction are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-sorted will be calculated as follows: Payment Reduction = (B x M) x R Where: B = Bid rate from P-028.2 clause M = Mis-sorted volume exceeding threshold excluding utility R = Reduction factor* 0.2 for diameter mis-sort 0.3 for high quality mis-sort *Logs eligible for payment reduction based on multiple reduction factors will be calculated at the higher payment reduction factor. Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-sort payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-sorts shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code P-037.2 Mismanufacture and Payment Reduction for Delivered Forest Products Forest Products delivered that do not meet preferred log length specifications or multiples or combinations of preferred lengths and Forest Products delivered not meeting manufacturing standards as described in clause G-024.2 are considered mis- manufactured. Purchaser receiving mis-manufactured Forest Products is required to pay the State at the bid price under this contract. However, when mis-manufactured Forest Products amount to more than 8% of the total delivered sort volume, Purchaser may request approval for payment reduction for delivered volume exceeding the mis-manufacture threshold. Requests for payment reduction must be submitted to the State in writing prior to contract expiration. Eligibility for mis-manufacture payment reduction is subject to State approval and shall be determined by the State’s delivered product analysis. Forest Products determined by the State eligible for mis-manufacture price reductions are not eligible for any other price adjustments. Payment reduction for Forest Products deemed mis-manufactured will be calculated as follows: Payment Reduction = (B x M) x (0.2) Where: B = Bid rate from P-028.2 clause M = Mis-manufactured volume exceeding threshold excluding utility Third-party scaling organization information is required to determine Xxxxxxxx mbf for payment reduction purposes. Value will be derived from the applicable sort value as described in this contract. Scale information for determining mis-manufacture payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for mis-manufacture shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.
Certification Regarding Entire TIPS Agreement for Part 1 and Part 2 Contracts 5 This is a two part solicitation. Part 1 is solicited for TIPS sales that are not considered a "public work" construction project. Part 1 permits the sale of goods and non-construction/non-"public work" services such as maintenance and minor repairs. Part 2 Job Order Contract (JOC) is solicited for projects considered by your TIPS Member Customers to be a "public work" construction project. The determination of whether or not a TIPS sale amounts to a "public work" construction project requiring a Part 2 JOC contract is made by the TIPS Member Customer at the time of each TIPS sale. Thus, Vendors are encouraged to respond to both Parts 1 and 2 in case your TIPS Member Customers require that a sale be made under one Part or the other. However, responding to both Parts is not required. If Vendor responds and is awarded to both Parts, Vendor will have one contract for Part 1 and a separate contract for Part 2.
