Billing Period and Payment Sample Clauses

Billing Period and Payment. 11.1 On or before the tenth (10th) day of an applicable month, Buyer shall provide the Seller a statement based upon the meter data for the Facility’s output delivered in such previous calendar month and the applicable Contract Price. Seller will review the statement and notify Buyer by the 15th day of the month if it disagrees with the amount to be paid. If Seller does not notify Buyer by the 15th day of the month, Seller shall be deemed to have agreed with the amount specified in Buyer’s statement. Buyer will pay Seller by the 25th day of the month, or within 10 days following notification that Seller is in agreement with Xxxxx’s statement or such agreement is established by Seller’s not having responded otherwise. 11.2 If it is not possible to read the meter for any reason, Seller's production may be estimated by Xxxxx on the basis of Seller's production during the most recent preceding billing period for which readings were obtained, unless some unusual condition is known to exist. A bill or payment rendered on the basis of such estimate shall be as valid as if made from actual meter readings.
AutoNDA by SimpleDocs
Billing Period and Payment. 11.1 On or before the tenth (10th) day of an applicable month, Buyer shall provide the Seller a statement based upon the meter data for the Facility’s output delivered in such previous calendar month and the applicable Contract Price. Seller will review the statement and notify Buyer by the 15th day of the month if it disagrees with the amount to be paid. If Seller does not notify Buyer by the 15th day of the month, Seller shall be deemed to have agreed with the amount specified in Buyer’s statement. Buyer will pay Seller by the 25th day of the month, or within 10 days following notification that Seller is in agreement with Xxxxx’s statement or such agreement is established by Seller’s not having responded otherwise. 11.2 If it is not possible to read the meter for any reason, Seller's production may be estimated by Xxxxx on the basis of Seller's production during the most recent preceding billing period for which readings were obtained, unless some unusual condition is known to exist. A bill or payment rendered on the basis of such estimate shall be as valid as if made from actual meter readings. 11.2.1 If it is not possible to read the meter for any reason, Seller shall have 60 days in which to (a) identify to Buyer the impediment(s) to reading the meter and (b) to the extent any impediment is attributable to Seller’s actions or omissions, remove the impediment so that it is possible for Buyer to read the meter.
Billing Period and Payment 

Related to Billing Period and Payment

  • Measurement and Payment Temporary traffic control work, including, but not limited to installation and removal of portable signs, cones, drums, skinny drums, flaggers, AFAD’s, changeable message boards, truck mounted attenuators, flashing arrow boards, and pilot vehicles will be paid at the contract lump sum price for

  • Billing Period The calendar month shall be the standard period for all charges and payments under this Agreement. On or before the fifteenth (15th) day following the end of each month, Seller shall render to Buyer an invoice for the payment obligations incurred hereunder during the preceding month, based on the Energy Delivered in the preceding month, and any RECs deposited in Buyer’s GIS account or a GIS account designated by Buyer to Seller in writing in the preceding month. Such invoice shall contain supporting detail for all charges reflected on the invoice, and Seller shall provide Buyer with additional supporting documentation and information as Buyer may request.

  • Average Log Length and Payment Reduction If the average log length for all logs delivered under this contract is less than the average log length specified in the table in clause G-024.2, The amount of allowable payment reduction shall be calculated by multiplying the payment rate in P-028.2 by the total volume delivered, and the difference between the average length of logs delivered and the average log length specified in G-024.2, times 1% as follows: Log Length Payment Reduction = (B x V x L) x (.01) Where: B = Bid rate from P-028.2 clause V = total delivered log Volume L = Length in feet below specified average (rounded to nearest Average log length payment reductions calculated by the Purchaser must be approved by the State, prior to payment for the final billing period. Third-party scaling organization information is required to determine Xxxxxxxx mbf and Average log length for payment reduction purposes. Average log length is determined on a piece count basis. Value of log length price reduction will be derived from the applicable sort value as described in this contract. Scale information for determining Average log length for payment reduction eligibility must be obtained from roll-out scale. Truck-ramp, sample scaling, and/or bundle scaling information is not acceptable for determining eligibility. Purchaser’s exclusive remedy for below average log lengths shall be the payment reduction described in this clause, notwithstanding other provisions in the Uniform Commercial Code.

  • Calculation and Payment Interest on LIBOR Loans and all other Obligations and the amount of any fees set forth in Subsection 1.4 shall be calculated on the basis of a three hundred sixty (360) day year for the actual number of days elapsed. Interest on the Base Rate Loans shall be calculated on the basis of a three hundred sixty-five or -six (365-6) day year for the actual number of days elapsed. The date of funding or conversion to a Base Rate Loan and the first day of an Interest Period with respect to a LIBOR Loan shall be included in the calculation of interest. The date of payment of any Loan and the last day of an Interest Period with respect to a LIBOR Loan shall be excluded from the calculation of interest; provided, if a Loan is repaid on the same day that it is made, one (1) day’s interest shall be charged. Interest accruing on the Base Rate Loan is payable in arrears on each of the following dates or events: (i) the last day of each calendar quarter; (ii) the prepayment of such Loan (or portion thereof); and (iii) the applicable Maturity Date or the Revolving Loan Expiration Date, as the case may be, whether by acceleration or otherwise. Interest accruing on each LIBOR Loan is payable in arrears on each of the following dates or events: (i) the last day of each applicable Interest Period; (ii) if the Interest Period is longer than three (3) months, on each three-month anniversary of the commencement date of such Interest Period; (iii) the prepayment of such Loan (or portion thereof); and (iv) the applicable Maturity Date or the Revolving Loan Expiration Date, as the case may be, whether by acceleration or otherwise.

  • Invoices and Payment 16.1 Transnet shall pay the Supplier/Service Provider the amounts stipulated in each Purchase Order/Work Order, subject to the terms and conditions of this Agreement. 16.2 Transnet shall pay such amounts to the Supplier/Service Provider upon receipt of a valid and undisputed Tax Invoice together with the supporting documentation, as specified in the Schedule of Requirements appended hereto, once the valid and undisputed Tax Invoices or such portions of the Tax Invoices which are valid and undisputed become due and payable to the Supplier/Service Provider for the delivery of the Goods/Services ordered, in terms of clause 16.5 below. 16.3 Transnet may, pending an investigation, withhold any payments to the Supplier/Service Provider, in the case where irregular expenditure has been identified in the particular contract and that there is reasonable suspicion that the Supplier/Service Provider is involved or was aware that the contract transgressed any legislation. 16.4 All Prices set out in this Agreement and the Schedule of Requirements hereto are to be indicated inclusive and exclusive of VAT, which will be payable at the applicable rate in ZAR. 16.5 Unless otherwise provided for in the Schedule of Requirements appended to this Agreement, Tax Invoices shall be submitted together with a month-end statement. Payment against such month-end statement shall be made by Transnet within 30 [thirty] calendar days after date of receipt by Transnet of the Supplier’s/Service Provider’s statement together with the relevant valid and undisputed Tax Invoice(s) and supporting documentation. 16.6 Where the payment of any Tax Invoice, or any part of a Tax Invoice which is not in dispute, is not made in accordance with this clause, the Supplier/Service Provider shall be entitled to charge interest on the outstanding amount, at The Standard Bank of South Africa’s prime rate of interest in force, for the period from the due date of payment until the outstanding amount is paid. 16.7 The Supplier/Service Provider shall remain the owner of all plant, material, machinery, equipment and the like [collectively, the Supplier’s Goods] provided to Transnet until Transnet has paid in full for the Supplier’s Goods, it being specifically agreed that Transnet shall acquire no rights [including liens] of whatsoever nature in such Supplier’s Goods until date of final payment by Transnet. Subject to the aforegoing, all risk and benefit to the Supplier’s Goods shall pass from the Supplier to Transnet on delivery of the Supplier’s Goods by the Supplier to Transnet.

  • INVOICE AND PAYMENT A. Grantee will request payment using the State of Texas Purchase Voucher (Form B-13) on a monthly basis and acceptable supporting documentation for reimbursement of the required services/deliverables. Additionally, the Grantee will submit the Financial Status Report (FSR-269A) and the Match Certification Form (B-13A). Vouchers, supporting documentation, Financial Status Reports, and Match Certification Forms should be mailed or emailed to the addresses below. Department of State Health Services Claims Processing Unit, MC 1940 0000 Xxxx 00xx Xxxxxx P.O. Box 149347 Austin, TX 00000-0000 FAX: (000) 000-0000 EMAIL: xxxxxxxx@xxxx.xxxxx.xxx, Xxx.xxxxxxxxxxxxxx@xxxx.xxxxx.xxx & XXXXxxxxxxx@xxxx.xxxxx.xxx B-13, B-13A, and supporting documentation should be sent to: xxxxxxxx@xxxx.xxxxx.xxx, Xxx.xxxxxxxxxxxxxx@xxxx.xxxxx.xxx & XXXXxxxxxxx@xxxx.xxxxx.xxx FSRs should be sent to: xxxxxxxx@xxxx.xxxxx.xxx, Xxx.xxxxxxxxxxxxxx@xxxx.xxxxx.xxx, XXXXxxxxx@xxxx.xxxxx.xxx & XXXXxxxxxxx@xxxx.xxxxx.xxx B. Grantee will be paid on a monthly basis and in accordance with Attachment B, Budget. C. System Agency reserves the right, where allowed by legal authority, to redirect funds in the event of financial shortfalls. System Agency will monitor Xxxxxxx’s expenditures on a quarterly basis. If expenditures are below that projected in Grantee’s total Contract amount, Xxxxxxx’s budget may be subject to a decrease for the remainder of the Term of the Contract. Vacant positions existing after ninety days may result in a decrease in funds. X. Xxxxxxx may request a one-time working capital advance not to exceed 12% of the total amount of the Contract funded by System Agency. All advances must be expended by the end of the Contract term. Advances not expended by the end of the Contract term must be refunded to System Agency. X. Xxxxxxx will repay all or part of advance funds at any time during the Contract’s term. However, if the advance has not been repaid prior to the last three months of the Contract term, the Grantee must deduct at least one-third of the remaining advance from each of the last three months’ reimbursement requests. If the advance is not repaid prior to the last three months of the Contract term, System Agency will reduce the reimbursement request by one- third of the remaining balance of the advance.

  • Calculation and Payment of Interest (a) Interest on the outstanding principal amount from time to time of each Prime Rate Loan and Base Rate Canada Loan shall accrue from day to day from and including the date on which credit is obtained by way of such Loan to but excluding the date on which such Loan is repaid in full (both before and after maturity and as well after as before judgment) and shall be calculated on the basis of the actual number of days elapsed divided by 365 or 366, as the case may be. (b) Interest on the outstanding principal amount from time to time of each LIBOR Loan shall accrue from day to day from and including the date on which credit is obtained by way of such Loan to but excluding the date on which such Loan is repaid in full (both before and after maturity and as well after as before judgment) and shall be calculated on the basis of the actual number of days elapsed divided by 360. (c) Accrued interest shall be paid, (i) in the case of interest on Prime Rate Loans and Base Rate Canada Loans, in arrears monthly on the 22nd day of each calendar month; and (ii) in the case of interest on LIBOR Loans, on the last day of the applicable Interest Period; provided that, in the case of Interest Periods of a duration longer than three months, accrued interest shall be paid no less frequently than every three months from the first day of such Interest Period during the term of such Interest Period and on the date on which such LIBOR Loans are otherwise required to be repaid.

  • Settlement Amount If the Non-Defaulting Party has declared an Early Termination Date pursuant to Section 7.2(b), the Non-Defaulting Party shall have the right to (i) accelerate all amounts owing between the Defaulting Party and the Non-Defaulting Party and to liquidate and terminate the undertakings set forth in this Agreement as between the Defaulting Party and the Non-Defaulting Party; and (ii) withhold any payments due to the Defaulting Party under this Agreement pending payment of the Termination Payment. The Non-Defaulting Party will calculate, in a commercially reasonable manner, the Settlement Amount with respect to the Defaulting Party’s obligations under the Agreement and shall net the Settlement Amount in the manner provided for in Section 7.3(c).

  • Xxxxxxxx and Payments Xxxxxxxx and payments shall be sent to the addresses set out in Appendix F hereto.

  • Expense Accrual and Payment Services (1) For each valuation date, calculate the expense accrual amounts as directed by the Trust as to methodology, rate or dollar amount. (2) Process and record payments for Fund expenses upon receipt of written authorization from the Trust. (3) Account for Fund expenditures and maintain expense accrual balances at the level of accounting detail, as agreed upon by USBFS and the Trust. (4) Provide expense accrual and payment reporting.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!