Buy American Certificate Sample Clauses

Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American – Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American—Supplies.” (2) Foreign End Products: LINE ITEM NO. COUNTRY OF ORIGIN [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (1) Buy American -- Free Trade Agreements -- Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American -- Free Trade Agreements -- Israeli Trade Act, is included in this solicitation.) (i) The offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (g)(1)(iii) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The terms “Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Israeli end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American--Free Trade Agreements--Israeli Trade Act.” (ii) The offeror certifies that the following supplies are Free Trade Agreement country end products (other than Bahrainian, Moroccan, Omani, Panamanian, or Peruvian end products) or Israeli end products as defined in the clause of this solicitation entitled “Buy American—Free Trade Agreements—Israeli Trade Act”: Free Trade Agreement Country End Products (Other than Bahrainian, M...
Sample 1Sample 2Sample 3See All (19)
AutoNDA by SimpleDocs
Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American-- Supplies, is included in this solicitation.) (1) The offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product and that for other than COTS items, the offeror has considered components of unknown origin to have been mined, produced, or manufactured outside the United States. The offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (2) of the definition of “domestic end product.” The terms “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “end product,” “foreign end product,” and “United States” are defined in the clause of this solicitation entitled “Buy American--Supplies.”
Sample 1Sample 2Sample 3See All (6)
Buy American Certificate. (Applies only if the clause at Federal Acquisition Regulation (FAR) 52.225-1, Buy American--Supplies, is included in this solicitation.) (i) The Offeror certifies that each end product, except those listed in paragraph (f)(2) of this provision, is a domestic end product. (ii) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. (iii) The terms "domestic end product," "end product," "foreign end product," and "United States" are defined in the clause of this solicitation entitled "Buy American-Supplies." (2) Foreign End Products: [List as necessary] (3) The Government will evaluate offers in accordance with the policies and procedures of FAR Part 25. (1) Buy American--Free Trade Agreements--Israeli Trade Act Certificate. (Applies only if the clause at FAR 52.225-3, Buy American--Free Trade Agreements--Israeli Trade Act, is included in this solicitation.) (i) (A) The Offeror certifies that each end product, except those listed in paragraph (g)(1)(ii) or (iii) of this provision, is a domestic end product.
Sample 1Sample 2
Buy American Certificate. By submitting a bid/proposal under this solicitation, except for those items listed by the offeror below or on a separate and clearly identified attachment to this bid/proposal, the offeror certifies that steel and each manufactured product, are produced in the United States, as defined in the clause Buy American – Steel and Manufactured Products for Construction Contracts) and that components of unknown origin are considered to have been produced or manufactured outside the United States. Offerors may obtain from the owner a listing of articles, materials and supplies excepted from this provision. Product Country of Origin
Sample 1

Related to Buy American Certificate

  • Bring-Down Certificate Section 2(A)(15) of the Current HPA is hereby amended by (i) striking “on each anniversary of the Effective Date during the Term (as defined below)” and replacing it with “on each anniversary of the Effective Date through September 30, 2016, and from and after October 1, 2016, no later than one hundred twenty (120) days after the end of each of their respective fiscal years”, and (ii) by adding to the end “A final certification shall be delivered by each of HFA and Eligible Entity on the Final Repayment Date (as defined in the Financial Instrument).”

  • Termination Certificate Upon termination of this Agreement, the Parties hereto shall execute an appropriate certificate of termination in recordable form (a “Termination Certificate”), which shall be recorded in the official records of Los Angeles County.

  • TRUTH IN NEGOTIATION CERTIFICATE Signature of this Contract by the CONTRACTOR shall act as the execution of the truth-in- negotiation certificate certifying that the wage rates and costs used to determine the compensation provided for in this Contract are accurate, complete and current as of the date of the Contract and no higher than those charged the CONTRACTOR’S most favored customer for the same or substantially similar service. The said rates and costs shall be adjusted to exclude any significant sums should the COUNTY determine that the rates and costs were increased due to inaccurate, incomplete or non-current wage rates or due to inaccurate representations of fees paid to outside Contractors. The COUNTY shall exercise its right under this “Certificate” within one (1) year following final payment.

  • Non-Book Entry Certificate to Global Certificate If a holder of a Non-Book Entry Certificate that is a Private Certificate (other than any Risk Retention Certificate during the RR Interest Transfer Restriction Period, a Class S Certificate or a Class R Certificate) wishes at any time to exchange its interest in such Non-Book Entry Certificate for an interest in a Global Certificate of the same Class, or to transfer all or part of such Non-Book Entry Certificate to an institution that is entitled to take delivery thereof in the form of an interest in a Global Certificate, such holder may, subject to the rules and procedures of Euroclear or Clearstream, if applicable, and the Depository, cause the exchange of all or part of such Non-Book Entry Certificate for an equivalent beneficial interest in the appropriate Global Certificate of the same Class. Upon receipt by the Certificate Registrar, as registrar, at its office designated in Section 5.11 of this Agreement, of (1) such Non-Book Entry Certificate, duly endorsed as provided herein, (2) instructions from such holder directing the Certificate Registrar, as registrar, to credit, or cause to be credited, a beneficial interest in the applicable Global Certificate equal to the portion of the Certificate Balance of the Non-Book Entry Certificate to be exchanged, such instructions to contain information regarding the participant account with the Depository to be credited with such increase and (3) a certificate in the form of Exhibit I to this Agreement (in the event that the applicable Global Certificate is the Temporary Regulation S Global Certificate), in the form of Exhibit J to this Agreement (in the event that the applicable Global Certificate is the Regulation S Global Certificate) or in the form of Exhibit K to this Agreement (in the event that the applicable Global Certificate is the Rule 144A Global Certificate), then the Certificate Registrar, as registrar, shall cancel, or cause to be canceled, all or part of such Non-Book Entry Certificate, and shall, if applicable, direct the Certificate Administrator to execute, authenticate and deliver to the transferor a new Non-Book Entry Certificate equal to the aggregate Certificate Balance of the portion retained by such transferor and shall instruct the Depository to increase, or cause to be increased, such Global Certificate by the aggregate Certificate Balance of the portion of the Non-Book Entry Certificate to be exchanged and to credit, or cause to be credited, to the account of the institution specified in such instructions a beneficial interest in the applicable Global Certificate equal to the Certificate Balance of the portion of the Non-Book Entry Certificate so canceled.

  • Business Tax Certificate Unless the City Treasurer determines in writing that a contractor is exempt from the payment of business tax, any contractor doing business with the City of San Diego is required to obtain a Business Tax Certificate (BTC) and to provide a copy of its BTC to the City before a Contract is executed.

  • Certificate Register and Certificate Registrar 9 Class.........................................................................9

  • Depositor as Certificateholder The Depositor in its individual or any other capacity may become the owner or pledgee of Certificates and may otherwise deal with the Owner Trustee or its Affiliates as if it were not the Depositor.

  • Secretary Certificate The Company shall have delivered to the Purchaser a certificate from its secretary certifying as to (A) copies of the Company’s Organizational Documents as in effect as of the Closing Date, (B) the resolutions of the Company’s board of directors and shareholders authorizing the execution, delivery and performance of this Agreement and the consummation of the transactions contemplated hereby, and (C) the incumbency of officers authorized to execute this Agreement.

  • Representation Certificate The Agent shall have received the certificate required to be delivered pursuant to Section 7(l) on or before the date on which delivery of such certificate is required pursuant to Section 7(l).

  • Servicing Certificate Not later than each Determination Date, the Master Servicer shall deliver (a) to the Indenture Trustee, the data necessary to prepare the items below and the statement for Noteholders required to be prepared pursuant to Section 4.04 and (b) to the Indenture Trustee, the Owner Trustee, the Sponsor, the Depositor, the Paying Agent, the Credit Enhancer, and each Rating Agency a Servicing Certificate (in written form or the form of computer readable media or such other form as may be agreed to by the Indenture Trustee and the Master Servicer), together with an Officer's Certificate to the effect that the Servicing Certificate is correct in all material respects, stating the related Collection Period, Payment Date, the series number of the Notes, the date of this Agreement, and: (i) the aggregate amount of collections received on the Mortgage Loans by the Determination Date for the related Collection Period; (ii) the aggregate amount of (a) Interest Collections and (b) Principal Collections for the related Collection Period; (iii) the Investor Floating Allocation Percentage and the Investor Fixed Allocation Percentage for the related Collection Period; (iv) the Investor Interest Collections and Investor Principal Collections for the related Collection Period; (v) the Interest Collections that are not Investor Interest Collections and Transferor Principal Collections for the related Collection Period; (vi) the Note Interest and the applicable Note Rate for the Notes for the related Interest Period; (vii) the amount of the Note Interest that is not payable to the Noteholders because of insufficient Investor Interest Collections; (viii) the Unpaid Investor Interest Shortfall and the amount of interest on the shortfall at the applicable Note Rate applicable from time to time (separately stated) to be distributed on the related Payment Date; (ix) the remaining Unpaid Investor Interest Shortfall after the distribution on the related Payment Date; (x) the amount of any Basis Risk Carryforward in the distribution; (xi) the amount of the remaining Basis Risk Carryforward after giving effect to the related distribution; (xii) the Accelerated Principal Payment Amount and the portion of it that will be distributed pursuant to Section 8.03(a)(vi) of the Indenture; (xiii) the Scheduled Principal Collections Payment Amount, separately stating its components; (xiv) the amount of any Transfer Deposit Amount paid by the Sponsor or the Depositor pursuant to Section 2.02 or 2.04; (xv) any accrued Servicing Fees for the Mortgage Loans for previous Collection Periods and the Servicing Fee for the related Collection Period; (xvi) the Investor Loss Amount for the related Collection Period; (xvii) the aggregate amount of Investor Loss Reduction Amounts for previous Payment Dates that have not been previously reimbursed to the Holders of the Notes pursuant to Section 8.03(a)(iv) of the Indenture; (xviii) the aggregate Asset Balance of the Mortgage Loans as of the end of the preceding Collection Period and as of the end of the second preceding Collection Period; (xix) [Deleted]; (xx) the Note Principal Balance and loan factor after giving effect to the distribution on the related Payment Date and to any reduction because of the Investor Loss Amount; (xxi) the Transferor Principal Balance and the Available Transferor Subordinated Amount after giving effect to the distribution on the Payment Date; (xxii) the aggregate amount of Additional Balances created on the Mortgage Loans during the previous Collection Period; (xxiii) the number and aggregate Asset Balances of Mortgage Loans (x) as to which the Minimum Monthly Payment is delinquent for 30-59 days, 60-89 days, and 90 or more days, respectively and (y) that have become REO, in each case as of the end of the preceding Collection Period; (xxiv) whether a Rapid Amortization Event has occurred since the prior Determination Date, specifying the Rapid Amortization Event if one has occurred; (xxv) whether an Event of Servicing Termination has occurred since the prior Determination Date, specifying the Event of Servicing Termination if one has occurred; (xxvi) the amount to be distributed to the Credit Enhancer pursuant to Section 8.03(a)(v) and Section 8.03(a)(vii) of the Indenture, stated separately; (xxvii) the Guaranteed Principal Payment Amount for the Payment Date; (xxviii) the Credit Enhancement Draw Amount for the related Payment Date; (xxix) the amount to be distributed to the Transferor pursuant to Section 8.03(a)(x) of the Indenture; (xxx) the amount to be paid to the Master Servicer pursuant to Section 8.03(a)(viii) of the Indenture; (xxxi) the Maximum Rate for the related Collection Period and the Weighted Average Net Loan Rate for the Mortgage Loans; (xxxii) the expected amount of any optional advances pursuant to Section 4.03 by the Master Servicer included in the distribution on the related Payment Date and the aggregate expected amount of optional advances pursuant to Section 4.03 by the Master Servicer outstanding as of the close of business on the related Payment Date; (xxxiii) the related Available Subordinated Transferor Amount after giving effect to the distribution to be made on the related Payment Date; (xxxiv) the number and principal balances of any Mortgage Loans transferred to the Transferor pursuant to Section 2.06; (xxxv) the aggregate of all Liquidation Loss Amounts on the Mortgage Loans since the Cut-off Date and whether a Cumulative Loss Test Violation has occurred since the prior Determination Date; (xxxvi) the Rolling Six Month Delinquency Rate, the Spread Rate, the Excess Spread Percentage, and the Rolling Three Month Excess Spread Percentage for the Payment Date; and (xxxvii) in the Servicing Certificates for the first and second Payment Dates, the number and Cut-off Date Asset Balance of Mortgage Loans for which the Mortgage Loan File was not delivered to the Indenture Trustee within 30 days of the Closing Date. The Indenture Trustee and the Owner Trustee shall conclusively rely upon the information contained in a Servicing Certificate for purposes of making distributions pursuant to Section 8.03 of the Indenture or distributions on the Transferor Certificates, shall have no duty to inquire into this information and shall have no liability in so relying. The format and content of the Servicing Certificate may be modified by the mutual agreement of the Master Servicer, the Indenture Trustee and the Credit Enhancer. The Master Servicer shall give notice of any changes to the Rating Agencies.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!