GENERAL WORKING CONDITIONS Section 18-1. Employment begins and ends at each project site. Section 18-2. The selection of craft foremen and/or general foremen and the number of foremen required shall be entirely the responsibility of the Employer, it being understood that in the selection of such foremen and/or general foremen the Employer will give primary consideration to the qualified individuals available in the local area. After giving such consideration, the Employer may select such individuals from other areas. All foremen shall take orders from the designated Employer representatives. Craft foremen shall be designated working foremen at the request of the Employer. Section 18-3. There shall be no limit on production by employees nor restrictions on the full use of tools or equipment. Employees using tools shall perform any of the work of the trade and shall work under the direction of the craft foremen. There shall be no restrictions on efficient use of manpower other than as may be required by safety regulations. Section 18-4. Employees shall be at their place of work at the starting time and shall remain at their place of work performing their assigned functions under the supervision of the Employer until quitting time. The parties reaffirm their policy of a fair day’s work for a fair day’s wage. Section 18-5. All equipment assigned to a project shall be under the control of the Employer. The Employer shall have the right to determine how many pieces of equipment an individual employee shall operate. In an emergency, foremen shall operate any equipment assigned by the Employer, and there shall be no restriction on foremen in the use of the tools of his or her craft in such emergency. The foremen shall be from the craft normally operating the equipment. In accordance with currently recognized craft jurisdiction, the Employer shall determine the assignment of employees to start, stop, and maintain small portable construction equipment. Such work may be assigned to craft employees within a reasonable distance of their primary duties or an employee may be assigned full time to start, stop and maintain the Employer’s small, portable equipment on the job site. There shall be no over xxxxxxx of this type of equipment. The number of employees assigned to rigging and scaffolding operations shall be at the sole discretion of the Employer. The ratio of journeyperson to welders shall be determined solely by the Employer. Section 18-6. The Employer may utilize the most efficient methods or techniques of construction, tools or other labor saving devices to accomplish the work. Practices not a part of the terms and conditions of this Agreement, stand by crews and feather bedding practices will not be recognized. Section 18-7. It is recognized that specialized or unusual equipment may be installed and/ or serviced by individuals who have special training, skill, or qualifications and are not covered by this Agreement. Testing, inspection, or service performed on plant equipment under warranty may be performed by the vendor’s personnel. Section 18-8. Neither the Union nor its local unions shall coerce or in any way interfere with the Owner’s personnel, operation or facilities at the plant site. The Owner’s right to contract directly with other companies for work at the plant site shall not be limited, and the Union shall cooperate and not interfere with the Employer’s operations. Section 18-9. It is agreed that overtime is undesirable and not in the best interest of the industry or the employees; therefore, except in unusual circumstances, overtime will not be worked. Where unusual circumstances do exist, however, the Employer will have the right to assign specific employees and/or crews to perform such overtime work as is necessary to accomplish the job. Section 18-10. There will be no rest periods, organized coffee breaks or other non-working time established during working hours. Section 18-11. Individual seniority shall not be recognized or applied to employees working on projects under this Agreement. Section 18-12. The Employer shall establish such reasonable project rules as the Employer deems appropriate. These rules will be reviewed at the pre-job conference and posted at the project site by the Employer, and may be amended thereafter as necessary.
Existing Conditions Tenant accepts the Property in its condition as of the execution of the Lease, subject to all recorded matters, laws, ordinances, and governmental regulations and orders. Except as provided herein, Tenant acknowledges that neither Landlord nor any agent of Landlord has made any representation as to the condition of the Property or the suitability of the Property for Tenant's intended use. Tenant represents and warrants that Tenant has made its own inspection of and inquiry regarding the condition of the Property and is not relying on any representations of Landlord or any Broker with respect thereto. If Landlord or Landlord's Broker has provided a Property Information Sheet or other Disclosure Statement regarding the Property, a copy is attached as an exhibit to the Lease.
WORKING CONDITIONS 9.01 Lunch periods shall be at mid-shift. 9.02 The Employer shall allow each employee two (2) breaks of ten (10) minutes each, but not more in a work shift. Time of breaks shall be mutually agreed upon. 9.03 Essential protective clothing including welder’s gloves, protective vests or leather jackets, noise abatement devices, and rainwear shall be supplied at no charge to the employee. In the event that an employee does not return the foregoing items supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any money owing to the employee. 9.04 Chemical or flush toilets shall be provided from the commencement of work on all jobs. Where the sewer or chemical toilets are not available, sanitary toilet facilities shall be provided as called for in local sanitary regulations. Toilet houses shall be painted, at least on the inside, and cleaned out daily. Toilet paper will be provided. 9.05 Where there is no running tap water available, drinking water in approved sanitary containers shall be provided. Paper cups will be supplied. Salt tablets shall be supplied during the summer months. 9.06 If requested by the Union or employee, the Employer will provide within three (3) calendar days, a termination slip which shall state the reason for the employee’s termination and whether or not he is eligible for rehire. 9.07 Adequate time will be allowed prior to quitting time for picking up tools. 9.08 A lock-up shall be provided for employees for drying clothes, and dressing room, as well as lunch room. The lock-up shall have tables, and benches with provision for drying clothes. Such lock-up shall have windows and venting with adequate lighting and provision for continuous heat twenty-four (24) hours a day. The Employer shall be responsible for having the lock-up cleaned out daily and kept cleared of building material and other construction paraphernalia. Additional shelters shall be provided for employees to eat their lunch as may be required. 9.09 In case of fire or burglary on property or premises provided by the Employer, the Employer shall protect the value of an employee’s work clothes up to a total of three hundred and fifty dollars ($350.00). The Employer shall also provide fire and burglary insurance for the employees required tools to a total value of the tools, tool for tool, make for make, provided an inventory of tools and clothing is filed with the Employer. The Employer shall supply the required forms and obtain the inventory from each employee. The employee shall receive a signed copy of the inventory from the Employer. Coverage will commence at the date of the filing of the inventory with the Employer. Where an employee fails to file an inventory his rights to submit a claim shall be waived. (a) All mechanics, welders, servicemen, tire servicemen, drill doctors, steel sharpeners, bodymen painters, and mechanics and welder apprentices who request coveralls shall have these supplied and cleaned by the Employer. There shall be one change a week available in the employee’s proper size. Employees are expected to take reasonable care of coveralls supplied. In the event that an employee does not return the coveralls supplied to him by the Employer, the Employer shall charge the cost of same to the employee and deduct this cost from any monies owing to the employee. When requested, coveralls shall be supplied on a temporary basis to employees who assist on work as described above, or where the Employer and the Union mutually agree that coveralls are required. (b) Employees entitled to receive coveralls as provided herein may obtain an additional change of coveralls in any one week providing the condition of the coveralls requires a change. The shop xxxxxxx shall use discretion in authorizing the additional change. (c) All shops shall provide adequate clean-up facilities. 9.11 The Employer shall pay the cost of obtaining operators’ licences other than those required under the Motor Vehicles Act for employees covered by this Agreement. 9.12 No employee will be permitted to use his own motor vehicle in a manner which is unfair to other members or against the best interest of the Union. 9.13 Each employee being terminated will be given one (1) hour’s notice of termination by the Employer or one (1) hour’s pay allowed in lieu thereof. Heavy duty mechanics and apprentice mechanics may utilize this hour to gather together their tools and put them in shape for their next job. 9.14 When a mechanic leaves the employ of the Employer, the Employer shall be required to pay cost of shipping mechanic’s tools. Tools shall be shipped within forty-eight (48) hours of his leaving his employment, subject to the same conditions as govern transportation. When an Operating Engineer elects to transport his own tools to and from the jobsite, the employee shall be paid the rate of two dollars and seventy-five cents ($2.75) per one hundred (100) pounds per one hundred (100) miles. (e.g. $2.75 x 528 pounds x 273 miles = $39.64). Where the Employer fails to comply with the above, the employee shall be deemed to be still on the payroll of the Employer and shall receive his usual wages and all other conditions of this Agreement until there is compliance with these provisions. 9.15 Where an employee is involved in an accident while on the job and as a result is unable to perform his work, he shall receive a full day’s pay for the day of the accident.
Existing Condition Except as otherwise set forth in the SPAR Disclosure Letter, since the Interim SPAR Marketing Balance Sheet Date, no SPAR Marketing Company has: (a) incurred any liabilities, other than liabilities incurred in the ordinary course of business consistent with past practice (including, without limitation, advances under its commitments and lines of credit), the liabilities contemplated under the SPAR Premerger Agreements; (b) discharged or satisfied any lien or encumbrance or paid any liabilities, other than in the ordinary course of business consistent with past practice (including, without limitation, repayments under its commitments and lines of credit), or failed to pay or discharge when due any liabilities, other than in the ordinary course of business consistent with past practice, or where the obligation is being contested in good faith, and the failure to pay or discharge has not caused and would not be reasonably likely to cause any SPAR Material Adverse Effect; (c) sold, encumbered, assigned or transferred any assets, properties or rights or any interest therein, or made any agreement or commitment or granted any option or right with, of or to any person to acquire any assets, properties or rights of any SPAR Marketing Company or any interest therein, except for sales and dispositions in the ordinary course of business consistent with past practice, and except for the transactions contemplated under the SPAR Premerger Agreements and this Agreement; (d) created, incurred, assumed or guaranteed any indebtedness for money borrowed, or mortgaged, pledged or subjected any of its assets to any mortgage, lien, pledge, security interest, conditional sales contract or other encumbrance of any nature whatsoever, other than (i) in the ordinary course of business (including, without limitation, future advances and floating liens under existing, increased or replacement credit facilities), or (ii) in connection with the financing of the MCI Acquisition; (e) made or suffered any early cancellation or termination of any Material SPAR Document (other than in the ordinary course of business with a vendor to a SPAR Marketing Company); or amended, modified or waived any substantial debts or claims held by it under any Material SPAR Document other than in the ordinary course of business; (f) declared, set aside or paid any dividend or made or agreed to make any other distribution or payment in respect of its capital shares or redeemed, purchased or otherwise acquired or agreed to redeem, purchase or acquire any of shares of its capital stock or its other ownership interests; (g) suffered any damage, destruction or loss that has had or will have (i) a SPAR Material Adverse Effect, or (ii) a replacement cost individually or in the aggregate at more than $100,000; (h) suffered any repeated, recurring or prolonged shortage, cessation or interruption of supplies or utility or other services required to conduct its business and operations; (i) suffered any material adverse change in the business, operations, properties, assets or financial condition of the SPAR Marketing Companies taken as a whole; (j) received notice or had knowledge of any actual or overtly threatened organized or coordinated labor trouble, strike or other similar occurrence, event or condition of any similar character that has had or would be reasonably likely to have a SPAR Material Adverse Effect; (k) increased the salaries or other compensation of, or made any advance (excluding advances for ordinary and necessary business expenses) or loan to, any of its employees or made any increase in, or any addition to, other benefits to which any of its employees are entitled (in each case other than increases in salaries or other compensation in the ordinary course of business consistent with past practice and that in the aggregate have not resulted in a SPAR Material Adverse Effect); (l) changed any of the accounting principles followed by it or the methods of applying such principles, other than the contemplated change for certain of the SPAR Marketing Companies from "subchapter s" status to "subchapter c" status for federal income tax purposes (to be effected shortly before the Effective Time) and other changes in implementing the SPAR Premerger Transactions; (m) except as contemplated by the SPAR Premerger Agreements or this Agreement, entered into any transaction other than in the ordinary course of business consistent with past practice; (n) except as contemplated by the SPAR Premerger Agreements or this Agreement, changed its authorized capital or its securities outstanding or otherwise changed its ownership interests, or granted any options, warrants, calls, conversion rights or commitments with respect to any of its capital stock or other ownership interests; or (o) agreed to take any of the actions referred to above.
Adverse Weather Conditions Except in emergency conditions, the Employer shall not require an employee to work outside under extreme weather conditions.
Vendor’s Conditions The Vendor shall not be obligated to complete the Transaction unless, at or before the Closing Time, each of the conditions listed below in this section has been satisfied, it being understood that the said conditions are included for the exclusive benefit of the Vendor: (a) The representations and warranties of YC in this Agreement shall be true and correct on the Closing Date. (b) YC shall have performed and complied with all of the terms and conditions in this Agreement and the Payment Undertaking on its part to be performed or complied with on or before the Closing Date. (c) As evidence of the satisfaction of the conditions in sections 7.1 (a) and (b), YC shall deliver to the Vendor at the Closing Time a certificate of YC confirming the matters in sections 7.1 (a) and (b) and to the effect that as of the Closing Time all other conditions set forth in this section have been satisfied. The certificate shall be signed by two senior executive officers of YC acceptable to the Vendor, acting reasonably. Notwithstanding the foregoing, the receipt of such certificate and the completion of the Transaction shall not constitute a waiver (in whole or in part) of, or have the effect of modifying or qualifying in any way, any of the representations and warranties of YC made in or pursuant to this Agreement, each of which shall survive the Closing and remain in full force and effect for the benefit of the Vendor as provided in Article 9. (d) YC and the Buyer shall have delivered to the Vendor a legal opinion from counsel acceptable to the Vendor, acting reasonably, and in form and content satisfactory to the Vendor subject to reasonable qualifications, as to the due incorporation and organization of YC and the Buyer, the corporate power and authority of YC and the Buyer, the receipt of all necessary approvals by YC and the Buyer and the enforceability of this Agreement, the Payment Undertaking and the Covenant Escrow Agreement as against YC and the Buyer and the non-conflict of this Agreement, the Payment Undertaking and the Covenant Escrow Agreement with respect to the constating documents of YC and the Buyer and any Applicable Laws. (e) The Vendor Regulatory Approval shall have been granted, obtained and received unconditionally or on terms satisfactory to the Vendor, acting reasonably. (f) No Order shall have been made and no Legal Proceeding shall have been commenced or shall be pending or threatened against the other Party or its affiliates or which enjoins, restricts or prohibits, or which asserts a claim or seeks a remedy that would have the effect of enjoining, restricting or prohibiting the completion of the Transaction. If any condition in this section has not been fulfilled on or before the Closing Date or if any such condition is or becomes impossible to satisfy, other than as a result of the failure of the Vendor to comply with its obligations under this Agreement, then the Vendor in its sole discretion may, without limiting any rights or remedies available to the Vendor at law or in equity, either terminate this Agreement by written notice to YC, in which case the provisions of sections 2.5(c)(iii), (iv) or (v) shall be applicable, or waive compliance with any such condition without prejudice to its right of termination in the event of non-fulfilment of any other condition.
SUPERIOR CONDITIONS 21.01 All existing benefits, rights, privileges, practices, terms or conditions of employment which may be considered to be superior to those contained herein and which are set out in Appendix 4 are specifically retained by this Agreement unless otherwise agreed by the local parties. The parties agree to remove from Appendix 4 those superior conditions which no longer have application. Where the parties cannot agree on whether a superior condition continues to have application, the issue will be reduced to a grievance and referred to arbitration. 21.02 The Union and the Participating Hospitals agree to establish a committee consisting of two (2) representatives of the Union and two (2) representatives of the Participating Hospitals to review the superior conditions appendices in each of the participating hospitals. This committee will report to their respective negotiating committees prior to the next round of central negotiations.
Termination Conditions Such license shall not be terminated or its exploitation enjoined, until and unless: (i) Hitachi has committed a material breach of its obligations under this IP License Agreement, Opto-Device has given written notice of such breach to Hitachi and such breach remains uncured after the Cure Period, or, in the case of a breach, which cannot be cured within such Cure Period, Hitachi has not instituted within such Cure Period steps necessary to remedy the default and/or thereafter has not diligently pursued the same to completion; or (ii) such a material breach is incurable. In the event the breach is a curable breach that cannot be cured within the Cure Period but with respect to which Hitachi has instituted steps necessary to remedy the default and is thereafter diligently pursuing such cure, both parties shall negotiate to determine whether further pursuit of such cure is reasonable. If the parties cannot agree on a resolution in such negotiations, then this issue shall be referred to arbitration pursuant to the arbitration procedures set forth in Exhibit B hereto to decide whether such breach can be cured or any other alternative remedy should be adopted. In the event the breach is an incurable breach, the parties agree that the matter shall be referred to arbitration pursuant to the arbitration procedures set forth in Exhibit B hereto to determine the appropriate remedy. In the event that either party submits the dispute to arbitration, both parties shall cooperate in such binding arbitration in accordance with Exhibit B.
Service Conditions Customer acknowledges that in the event of a service issue, Customer is responsible for on-site cooperative testing with LightEdge Technical Support to assist in the diagnosis of the trouble. Customer agrees to be bound to current terms of LightEdge Acceptable Use Policy. Terms of the Acceptable Use Policy are subject to change without notice. Current Acceptable Use Policy can be found here: xxxx://xxx.xxxxxxxxx.xxx/legal Customer agrees that any service complaints including concerns regarding level of support, products, service reliability, or any other concerns related to LightEdge or Services being provided by LIghtEdge will be communicated to LightEdge by sending an email to xx@xxxxxxxxx.xxx.
Pre-Existing Conditions The Contractor acknowledges that it has been provided unrestricted access to the existing improvements and conditions on the Project site and that it has thoroughly investigated those conditions. Contractor’s investigation was instrumental in preparing its Proposal to perform the Work. Contractor shall not make or be entitled to any adjustment to the Contract Time or the Contract Sum arising from Project conditions that Contractor discovered or, in the exercise of reasonable care, should have discovered in Contractor’s investigation.