OPERATING CONDITIONS Sample Clauses
OPERATING CONDITIONS. Developer shall design the Merchant Transmission Facility to operate within the voltage guidelines as specified in Article 9.5.
2. The nominal frequency of the New York State Transmission System is 60 Hz. The frequency may deviate by ± 0.05Hz from the nominal value during normal steady-state conditions. During extreme system disturbances, the system frequency may deviate from the nominal value by ± 0.07Hz. For very extreme disturbances such as system separation, frequency deviations may be ± 1.5Hz. Connecting Transmission Owner typically operates the 345kV AC bus at a higher voltage than 1.0pu. Under infrequent operating conditions the system voltage may be reduced to less than 1.0pu and the system reactive requirements may be such that the Merchant Transmission Facility may reduce import levels during such conditions.
OPERATING CONDITIONS. 6.1 Use of space segment
(i) As mentioned in Chapter VII of the license agreement, separate clearances/License shall be obtained by the Licensee directly from the WPC Wing of DoT.
(ii) The operation of space segment will be governed by instructions and procedures of Network Operations Control Center (NOCC).
(iii) The space segment monitoring charges shall be payable to NOCC by Licensee as per the rates decided by Licensor.
OPERATING CONDITIONS. The Customer hereby acknowledges that bandwidth fluctuations and problems with the access provider could cause a gap in the services provided by the OVH Corporation, which it would be unable to resolve. However, the Service shall be restricted, limited or suspended, as of right, by OVH: • if it seems that the Customer is using the services provided for any activity whatsoever which is not in compliance with these General Terms and Conditions; • in compliance with the applicable Specific Terms and Conditions; • if OVH receives a notice in that regard from a competent administrative, arbitral or judicial authority, in compliance with the appropriate applicable laws, or from a third party; • if the contact information in the Customer’s account seems to be false, inaccurate or out of date.
OPERATING CONDITIONS. In development of its functions the Executive Committee shall comply with conditions provided in Contract Clause 19, as follows:
OPERATING CONDITIONS. Developer shall design the Merchant Transmission Facility to operate within the voltage guidelines as specified in Article 9.5.
OPERATING CONDITIONS. (1) City shall have the right to approve the number and location of all bars and location of storage space furnished for use by Contractor. Contractor shall acquire no rights to such locations once assigned, and City may require Contractor to move temporary stands and equipment to accommodate the needs of other users of WPCRC.
(2) Any and all temporary concession stands shall be of first class quality. Final approval of design and decor rests with City.
(3) City shall furnish to Contractor all electricity and water utility service and refuse disposal services without charge.
(4) Contractor shall not permit any waste, injury or damage upon or to WPCRC or its equipment and appurtenances that are under the control of Contractor nor injury or damage by persons or person that are reasonably under the control of Contractor. At the expiration of this Agreement, Contractor shall ensure that WPCRC, its equipment and appurtenances, are in the same condition as they were at the outset of the contract term, excepting only normal wear and tear.
OPERATING CONDITIONS. A vehicle must comply with all aspects of the applicable program guidelines or it is not eligible for return. • Each vehicle and all accessories shall be in sound mechanical and electrical operating condition. Repair of these items must be made prior to turn-in or the vehicle will be rejected. • Any vehicle equipped with supplemental inflatable restraints (S.I.R.) including driver, passenger or side airbags that have been deployed, missing or otherwise disconnected, must be replaced with the approved OEM replacement and must meet GM standards prior to turn-in.
OPERATING CONDITIONS. The Galaxy 3 can be operated at 115~VAC or 220-240~VAC. There is a switch on the power supply to change between 115 Volts and 220-240 Volts. Power consumption is 175 Xxxxx at 50/60Hz. Warning: Make sure the voltage on the power sup- ply is set correctly for the area you are in.
OPERATING CONDITIONS. Part III – Provisions relating to Invoice Discounting only, will cease to apply to you and Operating Conditions – Part IV – Provisions relating to Factoring Clients only will become applicable; and
OPERATING CONDITIONS. Contractor vehicles shall be constructed and maintained in a manner that their contents will not leak, blow away, or spill therefrom. Vehicles shall not be allowed to stand in any street, alley, or another place longer than is reasonably necessary for Collections.