Certification of Proposed Product Sample Clauses

Certification of Proposed Product. (a) Microsoft will at all times control requirements for Xenon certification testing. Modifications to the Certification Specifications and Branding Specifications may be implemented by Microsoft at any time during the Term, but will not be retroactive to any Licensed Product already certified by Microsoft or Certification Testing Center. Prior to the first commercial launch of the Xenon console, Microsoft will perform all Proposed Product certification. Thereafter, Microsoft may designate as necessary a Certification Testing Center to conduct Proposed Product certification testing. (b) Company will, at its sole cost and expense, deliver to Microsoft or Microsoft’s Certification Testing Center a minimum of 5 units of the Proposed Product for certification. Company represents and warrants that all of the Proposed Products submitted are representative of product ready for release for general distribution, that Company has adequately and extensively tested the Proposed Products using the PXDK test equipment required by Microsoft, that there are no errors in the Proposed Products, and that the Proposed Products are subject to Company’s ongoing support, error detection and correction. If requested by Microsoft, Company will also provide Microsoft or the Certification Testing Center with copies of all End User installation and technical reference manuals for the Proposed Product(s), as well as any other documentation reasonably requested by Microsoft for operating the Proposed Product(s) and/or conducting the certification activities. (c) The Proposed Product(s) will be reviewed for compliance with the Certification Specifications in effect at the time of review. Company will be responsible for supplying any necessary documentation to operate the Proposed Product(s) for verification purposes and for designating a single contact person for technical assistance. If the certification is provided by a Certification Testing Center, Company will pay all verification fees required by the Certification Testing Center and will execute any additional contracts required by the Certification Testing Center. Microsoft is not liable for any damage to the Proposed Product(s) while in transit to and on Microsoft’s premises or that of the Certification Testing Center. (d) If a Proposed Product fails to meet the Certification Specifications, Microsoft or the Certification Testing Center will provide Company with a written report indicating the reasons for such failure but will no...
Sample 1
Certification of Proposed Product 
Sample 1Sample 2

Related to Certification of Proposed Product

  • SUBMISSION OF PROPOSALS Proposals will be submitted to the attention of Xx. Xxxxxxx Xxxx at XXX.Xxxxxxxxxxx@XxxxxxxXXX.xxx no later than 5:00 p.m. Eastern Wednesday, June 29, 2022.

  • Evaluation of Proposals All proposals received shall be reviewed to determine whether they meet the format requirements and the standards specified in the request for sealed proposals. The district shall evaluate the qualifications of the proposers based solely upon the criteria and evaluation methodology set forth in the request for sealed proposals, and shall assign a best value score to each proposal. Once the evaluation is complete, all responsive proposals shall be ranked from the highest best value to the lowest best value to the district.

  • Submission of Agreement Submission of this Lease to Tenant for signature does not constitute a reservation of space or an option to acquire a right of entry. This Lease is not binding or effective until execution by and delivery to both Landlord and Tenant.

  • New Application for Licensure Any time after the three-month period has lapsed from the Effective Date of this Agreement and Respondent has paid the Administrative Penalty set forth in Section III, Paragraph 1 of this Order, Respondent may apply for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement in any or all of the Participating States with the understanding that each State Mortgage Regulator reserves the rights to fully investigate such application for licensure or petition for reinstatement of an MLO Activity Endorsement and may either approve or deny such application or petition pursuant to the normal process for such licensing or endorsement investigations. No license application or petition described in this paragraph will be denied solely based on the facts, circumstances, or consensual resolution provided for in this Agreement. Respondent further agrees that Respondent must satisfy the Administrative Penalty provision prior to submitting an application for a new mortgage loan originator license or, as applicable, petition for the reinstatement of an MLO Activity Endorsement.

  • CERTIFICATION OF AGREEMENT In accordance with section 170LT of the Workplace Relations Act 1996, I now certify the attached written agreement. This agreement shall come into force from 16 February 2004 and shall remain in force until 31 October 2005. BY THE COMMISSION: Printed by authority of the Commonwealth Government Printer <Price code 70> TABLE OF CONTENTS Subject Matter Clause No. Page No. Accident Pay 29 32 All-In Payments 34 34 Alpine Areas 14.1.(b) 15 Altona Area Allowance 14.2.(a) 16 Amenities 37 35 Apprentices 22.(a) 23 Australian Materials 41 37 Casual Labour 12.2 13 Classification Structure & Rates of Pay, Allowances 13 14 Clothing Issue & Safety Footwear 40 36 Co-Invest (Long Service Leave) 27 31 Commitments 3 5 Consultation 8 7 Demolition Work 14.1.(d) 16 Dispute Settlement Procedure 9 8 Drugs & Alcohol 38 35 Employment & Termination 12 12 Fares & Travel Allowance 15 17 Fast Food Allowance 14.1.(a) 15 Further Flexibilities 23 24 Geelong, Altona, Portland, etc Metals Agreements 14.3 16 Geographic Area, and Sector Specific Allowances, Conditions and Exceptions 14 15 Hearing Tests 11.(2) 10 Heavy Blocks 11.(9) 12 Hours Of work, Rostered Days Off, and Protection of Leisure Time 17 17 Inclement Weather 24 24 Income Protection 28.1 31 Income Protection & Trauma Insurance 28 31 Induction Procedures 11.(4) 11 Job Stewards/Delegates 36 34 Job Xxxxxxx/Delegate Facilities 36.2 35 Journey Accidents 30 32 Latrobe Valley Allowance 14.2.(b) 16 Leisure Time Protected 17.3 18 Living Away from Home Allowance 16 17 Major Events 14.1.(c) 15 Metal Trades Labour Hire Agreement 14.4 16 Negotiation of a Subsequent Agreement 43 37 No Extra Claims 44 38 Objectives of the Agreement 2 5 Overtime 17.2 18 Parties and Persons Bound 4 6 Payment of Wages 19 21 Period of Operation 6 6 Picnic Day 31 33 Project Agreements 5.2 6 Project Pre-Commencement Conference 18 21 Protective Clothing & Equipment 11.(3) 10 Pyramid Subcontracting 35 34 Redundancy 25 30 Rehabilitation Program 39 35 Relationship to Parent Award and Victorian Building Industry Agreement 7 6 Right of Entry & Representation 33 33 Rostered Days Off 17.4 19 Safety Dispute Resolution 10 8 Scope & Application 5 6 Security & Continuity of Employment 32 33 Service Core Allowance 14.2.(c) 16 Signatories 45 39 Superannuation 26 30 Termination of Employment 12.3 13 Time & Wages Records 19.1 21 Title 1 5 Tool Storage 20 22 Toxic Substances 11(8) 11 Training & Related Matters 22 23 Trauma Insurance 28.2 32 Waste Minimisation, Recycling and Environmental Issues 42 37 Workplace Safety 11 10 Appendix A – Classification Structure 40 Appendix B – Rates of Pay 1. From 1 December 2002 2. From 1 March 2003 3. From 1 March 2004 4. From 1 March 2005 41 Appendix C – Site Allowances 51 Appendix D – Drugs & Alcohol Policy 54 Appendix E – Passenger and Material Lifts 61 Appendix F – Amenities 63 Appendix G – Shopping Centres 66 Appendix H – Trade Union Training Leave 67 Appendix I – Sector Appendix 70

  • Certification of Compliance The Recipient shall complete and submit the following Notice of Completion and, if applicable, Engineer’s Certification of Compliance to the Department upon completion of the construction phase of the Project.

  • Deemed Compliance with Proposition 65 The Parties agree that compliance by Xxxxxxxx with this Settlement Agreement constitutes compliance with Proposition 65 with respect to exposure to DEHP from use of the Products.

  • Response/Compliance with Audit or Inspection Findings A. Grantee must act to ensure its and its Subcontractors’ compliance with all corrections necessary to address any finding of noncompliance with any law, regulation, audit requirement, or generally accepted accounting principle, or any other deficiency identified in any audit, review, inspection or investigation of the Grant Agreement and the services and Deliverables provided. Any such correction will be at Grantee’s or its Subcontractor's sole expense. Whether Xxxxxxx's action corrects the noncompliance shall be solely the decision of the System Agency. B. As part of the services, Grantee must provide to HHS upon request a copy of those portions of Grantee's and its Subcontractors' internal audit reports relating to the services and Deliverables provided to the State under the Grant Agreement. C. Grantee shall include the requirement to provide to System Agency (and any of its duly authorized federal, state, or local authorities) internal audit reports related to this Grant Agreement in any Subcontract it awards. Upon request by System Agency, Grantee shall enforce this requirement against its Subcontractor. Further, Grantee shall include in any Subcontract it awards a requirement that all Subcontractor Subcontracts must also include these provisions.

  • Effect of non-approval of proposals Notwithstanding that under subclause (1) any proposals of the Company are approved by the Minister or determined by arbitration award, unless each and every such proposal and matter is so approved or determined by 31 October 1992 or by such extended date or period if any as the Company shall be granted pursuant to the provisions of this Agreement then the Minister may give to the Company 12 months notice of intention to determine this Agreement and unless before the expiration of the said 12 months period all the detailed proposals and matters are so approved or determined this Agreement shall cease and determine subject however to the provisions of Clause 35.

  • SUBMISSION OF BID Bids may be submitted via the electronic submission portal at: xxxxx://xxx.xxxxxxxxxx.xxx/buyer/691, or in the Procurement Division; Internal Operations Centre II, 000 X. Xxxxx Xxxxxx; 0xx Xxxxx, Xxxxxxx, XX 00000, prior to the submission deadline. Bids will be opened per the public meeting notice. If bid will be mailed or hand delivered, ensure it is secured in a sealed envelope, addressed as follows: A. Invitation for Bids Number B. Due Date of Bid Submittal C. Name of Bidder