Material Transfer (i) Other than as may be set forth in the Development Supply Agreement (as defined in Section 9.1), in order to facilitate activities of the Parties under the Inhaled Plan, either Party (referred to in this Section 3.5(c) as the “Transferring Party”) may provide to the other Party (referred to in this Section 3.5(c) as the “Material Receiving Party”) certain materials, PRINT Materials, GSK Materials, Research Materials or Research Products Controlled by the Transferring Party (such materials provided hereunder are referred to, collectively, as “Materials”) for use by the Material Receiving Party in furtherance of its rights and the conduct of its obligations under the Inhaled Plan and, in the event GSK exercises either or both of the Liquidia Respiratory Option or Inhaled Option, in furtherance of its rights under the Liquidia Respiratory License or Inhaled License, as applicable (the “Purpose”). All transfers of such Materials by the Transferring Party to the Material Receiving Party shall be documented in writing (the “Transfer Record”) that sets forth the type and name of the Material transferred, the amount of the Material transferred, the date of the transfer of such Material and the Purpose.
(ii) Except as otherwise provided under this Agreement, all such Materials delivered by the Transferring Party to the Material Receiving Party shall remain the sole property of the Transferring Party, shall only be used by the Material Receiving Party in furtherance of the Purpose, and shall be returned to the Transferring Party upon the termination of this Agreement or upon the discontinuation of the use of such Materials (whichever occurs first). The Material Receiving Party shall not cause the Materials to be used by or delivered to or for the benefit of any Third Party without the prior written consent of the Transferring Party.
(iii) At the time the Transferring Party provides Materials to the Material Receiving Party as provided herein and to the extent not separately licensed under this Agreement, the Transferring Party hereby grants to the other Party a non-exclusive license under the Patents and Know-How Controlled by it to use such Materials solely for the Purpose.
(iv) The Parties agree that the exchanged Materials: (A) shall be used in compliance with applicable Laws; (B) shall not be used in animals intended to be kept as domestic pets; (C) shall not be transferred to a Third Party except if this is provided for and is done in accordance with this Agreement; and (D) shall not be reverse engineered or chemically analyzed, except if this is provided for in the applicable Inhaled Plan. Confidential treatment has been requested with respect to portions of this agreement as indicated by “[***]” and such confidential portions have been deleted and filed separately with the Securities and Exchange Commission pursuant to Rule 24b-2 of the Securities Exchange Act of 1934, as amended.
(v) THE MATERIALS SUPPLIED BY THE TRANSFERRING PARTY UNDER THIS SECTION 3.5(c) ARE SUPPLIED “AS IS” AND NOT FOR USE IN HUMANS EXCEPT AS EXPRESSLY AGREED BY THE PARTIES IN WRITING, AND THE TRANSFERRING PARTY MAKES NO REPRESENTATIONS AND EXTENDS NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE USE OF THE MATERIALS DOES NOT INFRINGE ANY PATENT, COPYRIGHT, TRADEMARK, OR OTHER PROPRIETARY RIGHTS OF A THIRD PARTY.
(vi) The Material Receiving Party assumes all liability for damages that may arise from its use, storage or disposal of the Materials. The Transferring Party shall not be liable to the Material Receiving Party for any loss, claim or demand made by the Material Receiving Party, or made against the Material Receiving Party by any Third Party, due to or arising from the use of the Materials, except to the extent such loss, claim or demand is caused by the gross negligence or willful misconduct of the Transferring Party.
Clinical Trials The studies, tests and preclinical and clinical trials conducted by or on behalf of, or sponsored by, the Company, or in which the Company has participated, that are described in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus, or the results of which are referred to in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus, were and, if still pending, are being conducted in all material respects in accordance with protocols, procedures and controls pursuant to, where applicable, accepted professional and scientific standards for products or product candidates comparable to those being developed by the Company and all applicable statutes, rules and regulations of the FDA, the EMEA, Health Canada and other comparable drug and medical device (including diagnostic product) regulatory agencies outside of the United States to which they are subject; the descriptions of the results of such studies, tests and trials contained in the Registration Statement, the Time of Sale Disclosure Package or the Prospectus do not contain any misstatement of a material fact or omit a material fact necessary to make such statements not misleading; the Company has no knowledge of any studies, tests or trials not described in the Disclosure Package and the Prospectus the results of which reasonably call into question in any material respect the results of the studies, tests and trials described in the Registration Statement, the Time of Sale Disclosure Package or Prospectus; and the Company has not received any notices or other correspondence from the FDA, EMEA, Health Canada or any other foreign, state or local governmental body exercising comparable authority or any Institutional Review Board or comparable authority requiring or threatening the termination, suspension or material modification of any studies, tests or preclinical or clinical trials conducted by or on behalf of, or sponsored by, the Company or in which the Company has participated, and, to the Company’s knowledge, there are no reasonable grounds for the same. Except as disclosed in the Registration Statement, the Time of Sale Disclosure Package and the Prospectus, there has not been any violation of law or regulation by the Company in its respective product development efforts, submissions or reports to any regulatory authority that could reasonably be expected to require investigation, corrective action or enforcement action.
Manufacturing Technology Transfer Upon AbbVie’s written request with respect to a given Collaboration CAR-T Product and Licensed Product, Caribou shall effect a full transfer to AbbVie or its designee (which designee may be an Affiliate or a Third Party Provider) of all Materials and Know-How Controlled by Caribou relating to the then-current process for the Manufacture of such Collaboration CAR-T Product and any corresponding Licensed Products (each, a “Manufacturing Process”). Caribou shall provide, shall cause its Affiliates to provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to provide, all reasonable assistance requested by AbbVie to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to implement each Manufacturing Process at the facilities designated by AbbVie. If requested by AbbVie, such assistance shall include facilitating the entering into of agreements with applicable Third Party suppliers relating to such Collaboration CAR-T Product and any corresponding Licensed Products. Without limitation of the foregoing, in connection with the Manufacturing Process and related transfer:
(a) Caribou shall, and shall cause its Affiliates to, make available to AbbVie (or its Affiliate or designated Third Party Provider, as applicable), and shall use Commercially Reasonable Efforts to assist AbbVie in causing all Third Party Providers to make available to AbbVie, from time to time as AbbVie may request, all Materials and Manufacturing-related Know-How Controlled by Caribou relating to each Manufacturing Process, including methods, reagents and processes and testing/characterization Know-How, and all documentation constituting material support, performance advice, shop practice, standard operating procedures, specifications as to Materials to be used, and control methods, that are necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party manufacturer, as applicable) to use and practice such Manufacturing Process;
(b) Caribou shall cause all appropriate employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility at mutually convenient times to assist with the working up and use of each Manufacturing Process and with the training of the personnel of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to the extent necessary or reasonably useful to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice such Manufacturing Process;
(c) Without limiting the generality of this Section 4.4.2, Caribou shall cause all appropriate analytical and quality control laboratory employees and representatives of Caribou and its Affiliates, and shall use Commercially Reasonable Efforts to assist AbbVie in causing all appropriate analytical and quality control laboratory employees and representatives of Third Party Providers, to meet with employees or representatives of AbbVie (or its Affiliate or designated Third Party Provider, as applicable) at the applicable manufacturing facility and make available all necessary equipment, at mutually convenient times, to support and execute the provision of all applicable analytical methods and the validation thereof (including all applicable Know-How, Information and Materials Controlled by Caribou, and sufficient supplies of all primary and other reference standards);
(d) Caribou shall, and shall cause its Affiliates to, take such steps, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers take such steps, as are necessary or reasonably useful to assist AbbVie (or its Affiliate or designated Third Party Provider, as applicable) in obtaining any necessary licenses, permits or approvals from Regulatory Authorities with respect to the Manufacture of the applicable Collaboration CAR-T Products and corresponding Licensed Products at the applicable facilities; and
(e) Caribou shall, and shall cause its Affiliates to, provide, and shall use Commercially Reasonable Efforts to assist AbbVie in causing Third Party Providers to provide, such other assistance as AbbVie (or its Affiliate or designated Third Party Provider, as applicable) may reasonably request to enable AbbVie (or its Affiliate or designated Third Party Provider, as applicable) to use and practice each Manufacturing Process and otherwise to Manufacture the applicable Collaboration CAR-T Products and corresponding Licensed Products.
Clinical Studies The animal and other preclinical studies and clinical trials conducted by the Company or on behalf of the Company were, and, if still pending are, to the Company’s knowledge, being conducted in all material respects in compliance with all Applicable Laws and in accordance with experimental protocols, procedures and controls generally used by qualified experts in the preclinical study and clinical trials of new drugs and biologics as applied to comparable products to those being developed by the Company; the descriptions of the results of such preclinical studies and clinical trials contained in the Registration Statement and the Prospectus are accurate and complete in all material respects, and, except as set forth in the Registration Statement and the Prospectus, the Company has no knowledge of any other clinical trials or preclinical studies, the results of which reasonably call into question the clinical trial or preclinical study results described or referred to in the Registration Statement and the Prospectus when viewed in the context in which such results are described; and the Company has not received any written notices or correspondence from the FDA, the EMA, or any other domestic or foreign governmental agency requiring the termination, suspension or modification of any preclinical studies or clinical trials conducted by or on behalf of the Company that are described in the Registration Statement and the Prospectus or the results of which are referred to in the Registration Statement and the Prospectus.
License Transfer Customer may not sublicense, assign, transfer, rent or lease the software or software license except as permitted by HP. HP-branded software licenses are generally transferable subject to HP’s prior written authorization and payment to HP of any applicable fees. Upon such transfer, Customer’s rights shall terminate and Customer shall transfer all copies of the software to the transferee. Transferee must agree in writing to be bound by the applicable software license terms. Customer may transfer firmware only upon transfer of associated hardware.
Valid Transfer This Agreement or, in the case of Additional Accounts, the related Assignment constitutes a valid sale, transfer and assignment to the Trust of all right, title and interest of the Seller in the Receivables and the Collateral Security and the proceeds thereof and all of the Seller's rights, remedies, powers and privileges with respect to the Receivables under the Receivables Purchase Agreement and, upon the filing of the financing statements described in Section 2.01 with the Secretary of State of the State of Delaware and, in the case of the Receivables hereafter created and the proceeds thereof, upon the creation thereof, the Trust shall have a first priority perfected ownership interest in such property, subject to the rights of the Purchased Receivables Owners in any Collateral Security in respect of the Partial Accounts (other than the Vehicles relating to Principal Receivables arising in the Partial Accounts), except for Liens permitted under the Receivables Purchase Agreement. Except as otherwise provided in this Agreement and except for Liens permitted under the Receivables Purchase Agreement or the other Transaction Documents, neither the Seller nor any Person claiming through or under the Seller has any claim to or interest in the Collateral of the Trust. The representations and warranties set forth in this Section 2.03 shall survive the transfer and assignment of the Receivables to the Trust and the issuance of the Notes. Upon discovery by the Seller, the Servicer, the Trust, the Owner Trustee, any Agent or the Trustee of a breach of any of the foregoing representations and warranties, the party discovering such breach shall give prompt written notice to the other parties specified above, and to any Enhancement Providers. In the event of any breach of any of the representations and warranties set forth in this Section 2.03 having a material adverse effect on the interests of the Noteholders, then either the Trustee or the Holders of Notes evidencing not less than a majority of the aggregate Outstanding Dollar Principal Amount of all Notes, by notice then given in writing to the Seller (and to the Trustee, the Trust, any Enhancement Providers and the Servicer if given by the Noteholders), may direct the Seller to purchase the Noteholders' Interest within 60 days of such notice (or within such longer period as may be specified in such notice), and the Seller shall be obligated to make such purchase on a Payment Date occurring within such 60-day period on the terms and conditions set forth below; provided, however, that no such purchase shall be required to be made if, by the end of such 60-day period (or such longer period as may be specified), the representations and warranties set forth in this Section 2.03 shall be satisfied in all material respects, and any material adverse effect on the Noteholders' Interest caused thereby shall have been cured. The Seller shall deposit in the Collection Account in immediately available funds on the Business Day preceding such Payment Date, in payment for such purchase of the Noteholders' Interest, the Reassignment Amount for such Payment Date. Notwithstanding anything to the contrary in this Agreement, such amounts deposited in the Collection Account shall be applied in accordance with Section 706 of the Indenture and shall be allocated pro rata among the then-outstanding Series based on their respective Series Nominal Liquidation Amounts. If the Trustee or the Noteholders give notice directing the Seller to purchase the Noteholders' Interest as provided above, the obligation of the Seller to purchase the Noteholders' Interest pursuant to this Section 2.03 shall constitute the sole remedy respecting an event of the type specified in the first sentence of this Section 2.03 available to the Noteholders (or the Trustee on behalf of the Noteholders).
Lateral Transfer Employees may request to be transferred to a vacant position in another job classification at the same MCSC Grade level provided they meet the minimum qualifications for the position.
Clinical Supply In connection with the Technology Transfer, Lexicon shall transfer to Sanofi any usable inventory of Licensed Compound or Licensed Product, subject to Lexicon’s retention of reasonable requirements of such Licensed Compound or Licensed Product for its T1DM Development activities no later than [**] (or such other date as is agreed by the Parties), and Lexicon’s Manufacturing Cost paid to Lexicon CMOs for such transferred quantities of inventory shall be treated as Development Costs and borne by the Parties in accordance with Section 7.6. Prior to the completion of the Technology Transfer in accordance with Section 6.2, Lexicon shall, to the extent requested by Sanofi and as mutually agreed by the Parties, supply clinical quantities of the Licensed Products and placebo for use by Sanofi in the Development of Licensed Products for T2DM in accordance with the Development Plan, and Lexicon’s Manufacturing Cost incurred in connection therewith shall be treated as Development Costs. After the Technology Transfer, Sanofi shall supply clinical quantities of the Licensed Products and placebo reasonably required by Lexicon for Lexicon’s use in the Development of Licensed Products for T1DM in accordance with the Development Plan and for its own use in the Development of Licensed Products. Lexicon shall Manufacture (or have Manufactured) all such Licensed Product in accordance with Applicable Law and the applicable specifications therefor, including, to the extent required by Applicable Law, cGMP; provided that Lexicon’s liability arising from a breach by the CMO of its agreement with Lexicon shall be limited to such recoveries as are obtained by Lexicon using Commercially Reasonable Efforts to obtain such recoveries and such other remedies as may be available to Lexicon for such breach under its agreement with such CMO. Otherwise, Sanofi’s sole and exclusive remedy and Lexicon’s sole and exclusive liability to Sanofi for any nonconformity shall be for Lexicon to replace such nonconforming Licensed Compound or Licensed Product with conforming Licensed Compound or Licensed Product within reasonable timelines to be mutually agreed by the Parties in writing, but nothing in this Section 6.1.1 shall limit Lexicon’s liability for Third Party Claims under ARTICLE 11. At either Party’s option, Lexicon and Sanofi shall enter into a clinical supply agreement and a reasonable and customary Quality Agreement that shall set forth the terms and conditions upon which Lexicon and any of its Affiliates will conduct their quality activities in connection with such supply, including (i) a right of Sanofi to audit Lexicon and the Lexicon CMOs, (ii) coordination regarding inspections by Regulatory Authorities and (iii) the exchange of information between the Parties regarding the foregoing and quality issues in general. Such agreements shall be negotiated and agreed by the Parties in good faith.
Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.
Technology Transfer (a) Sublicensee acknowledges and agrees that ECC has delivered and made to Sublicensee a disclosure of a general introduction to the Technology and to its commercial feasibility prior to the execution of this Agreement. Except to the extent such information falls within one or more of the exceptions to the definition of "Confidential Information", all information disclosed by ECC to Sublicensee prior to the execution of this Agreement shall be deemed to constitute part of the Technology and shall be deemed to be confidential. The timing and extent of additional disclosure by ECC to Sublicensee shall be as set forth in subparagraph 22(b) hereof.
(b) Upon execution of this Agreement, ECC shall provide Sublicensee with copies of the patents listed in Section B of Exhibit "B" hereto. Beyond that, ECC shall not be required to provide additional information concerning, or disclosure of, the Technology to Sublicensee until Sublicensee provides to ECC (i) written notice of Sublicensee's intent to commercialize a Product, which written notice shall include detailed specifications for the designated Product, and (ii) evidence, reasonably satisfactory to ECC, of Sublicensee's intent to commercialize the designated Product in the form of written documentation of orders placed by Sublicensee of the equipment needed by Sublicensee to produce and commercialize the designated Product or in the form of written documentation from Sublicensee confirming the dedication and/or modification of existing equipment necessary to produce the designated Product. Within ninety (90) days after ECC's receipt of the items described in the preceding sentence, ECC shall provide to Sublicensee the following additional disclosure: (w) a Product specific recipe for the production of the designated Product; (x) Product specific process specifications for the production of the designated Product; (y) copies of all patent applications listed in the Exhibits hereto that ECC deems relevant to the production of the designated Product; and (z) a list of known raw materials suppliers and preferred equipment vendors.
