Commitment to Undertake and Complete Project Sample Clauses

Commitment to Undertake and Complete Project. The Developer covenants and agrees to commence the Project on or before the Project Commencement Date and tocomplete the Project on or before the Project Completion Date. The Developer recognizes and agrees that the Village has sole discretion with regard to the issuance of all approvals and permits relating to the Project, including but not limited to approval of any required permits, and any failure on the part of the Village to grant or issue any such required permit shall not give rise to any claim against or liability of the Village pursuant to this Agreement. The Village agrees, however, that anysuch approvals shall be made in conformance with the Village Codes and shall not be unreasonably denied, withheld, conditioned or delayed.
Sample 1
AutoNDA by SimpleDocs
Commitment to Undertake and Complete Project. The Developer covenants and agrees to commence Phase I and Phase II of the Project on or before the applicable Project Commencement Date for Phase I and Phase II and to have Phase I and Phase II of the Project completed on or before December 31, 2013. The Developer covenants and agrees to commence Phase III of the Project on or before the applicable Project Commencement Date for Phase III and to have Phase III of the Project completed on or before December 31, 2013. The Developer recognizes and agrees that the City has sole discretion with regard to all approvals and permits relating to the Project, including but not limited to approval of any required permits and any failure on the part of the City to grant or issue any such required permit shall not give rise to any claim against or liability of the City pursuant to this Agreement. The City agrees, however, that any such approvals shall be made in conformance with the City Codes and shall not be unreasonably denied, withheld, conditioned or delayed.
Sample 1

Related to Commitment to Undertake and Complete Project

  • Information Systems Acquisition Development and Maintenance a. Client Data – Client Data will only be used by State Street for the purposes specified in this Agreement.

  • Development Agreement As soon as reasonably practicable following the ISO’s selection of a transmission Short-Term Reliability Process Solution, the ISO shall tender to the Developer that proposed the selected transmission Short-Term Reliability Process Solution a draft Development Agreement, with draft appendices completed by the ISO to the extent practicable, for review and completion by the Developer. The draft Development Agreement shall be in the form of the ISO’s Commission-approved Development Agreement for its Reliability Planning Process, which is in Appendix C in Section 31.7 of Attachment Y of the ISO OATT, as amended by the ISO to reflect the Short-Term Reliability Process. The ISO and the Developer shall finalize the Development Agreement and appendices as soon as reasonably practicable after the ISO’s tendering of the draft Development Agreement. For purposes of finalizing the Development Agreement, the ISO and Developer shall develop the description and dates for the milestones necessary to develop and construct the selected project by the required in-service date identified in the STAR or Generator Deactivation Assessment, including the milestones for obtaining all necessary authorizations. Any milestone that requires action by a Connecting Transmission Owner or Affected System Operator identified pursuant to Attachment P of the ISO OATT to complete must be included as an Advisory Milestone, as that term is defined in the Development Agreement. If the ISO or the Developer determines that negotiations are at an impasse, the ISO may file the Development Agreement in unexecuted form with the Commission on its own, or following the Developer’s request in writing that the agreement be filed unexecuted. If the Development Agreement is executed by both parties, the ISO shall file the agreement with the Commission for its acceptance within ten (10) Business Days after the execution of the Development Agreement by both parties. If the Developer requests that the Development Agreement be filed unexecuted, the ISO shall file the agreement at the Commission within ten (10) Business Days of receipt of the request from the Developer. The ISO will draft, to the extent practicable, the portions of the Development Agreement and appendices that are in dispute and will provide an explanation to the Commission of any matters as to which the parties disagree. The Developer will provide in a separate filing any comments that it has on the unexecuted agreement, including any alternative positions it may have with respect to the disputed provisions. Upon the ISO’s and the Developer’s execution of the Development Agreement or the ISO’s filing of an unexecuted Development Agreement with the Commission, the ISO and the Developer shall perform their respective obligations in accordance with the terms of the Development Agreement that are not in dispute, subject to modification by the Commission. The Connecting Transmission Owner(s) and Affected System Operator(s) that are identified in Attachment P of the ISO OATT in connection with the selected transmission Short-Term Reliability Process Solution shall act in good faith in timely performing their obligations that are required for the Developer to satisfy its obligations under the Development Agreement.

  • MANAGEMENT AGREEMENT AND FRANCHISE AGREEMENT (a) At or prior to the Closing, Seller shall terminate the Existing Management Agreement and the Existing Franchise Agreement, and Seller shall be solely responsible for all claims and liabilities arising thereunder on, prior to or following the Closing Date, except termination or similar fees, which shall be paid by Buyer. Seller shall be responsible for paying all costs related to the termination of the Existing Management Agreement and Buyer shall be responsible for paying all reasonable and actual costs of the Franchisor related to the assignment or termination, as applicable, of the Existing Franchise Agreement. (b) At Closing, Buyer shall enter into the New Management Agreement in the form attached as Exhibit E and the New Franchise Agreement, effective as of the Closing Date, containing terms and conditions acceptable to Buyer (including, without limitation, such terms and conditions as may be required to accommodate Buyer’s and/or Buyer’s Affiliates’ REIT structure). (c) Seller shall use best efforts to promptly provide all information required by the Franchisor in connection with the New Franchise Agreement. Prior to the expiration of the Review Period, Buyer and Franchisor shall agree on the form and substance of the New Franchise Agreement. Except as otherwise provided in this Contract, the New Franchise Agreement shall contain such terms and conditions as are acceptable to Buyer in its sole and absolute discretion.

  • Property Management Agreement The Property Management Agreement is in full force and effect and, to Borrower's Knowledge, there are no defaults thereunder by any party thereto and no event has occurred that, with the passage of time and/or the giving of notice would constitute a default thereunder.

  • Project Background 6.1.1. Brief description of Contracting Agency’s project background and/or situation leading to this Project

  • Parties to Lock-Up Agreements The Company has furnished to the Underwriters a letter agreement in the form attached hereto as Exhibit A (the “Lock-up Agreement”) from each of the persons listed on Exhibit B. Such Exhibit B lists under an appropriate caption the directors and executive officers of the Company. If any additional persons shall become directors or executive officers of the Company prior to the end of the Company Lock-up Period (as defined below), the Company shall cause each such person, prior to or contemporaneously with their appointment or election as a director or executive officer of the Company, to execute and deliver to the Representatives a Lock-up Agreement.

  • Modifications and Updates to the Wire Center List and Subsequent Transition Periods 5.4.6.1 In the event AT&T identifies additional wire centers that meet the criteria set forth in Sections 5.4.2.1 or 5.4.2.2 above, but that were not included in the Master List of Unimpaired Wire Centers or AT&T’s List of Unimpaired Wire Centers, AT&T shall include such additional wire centers in a CNL. Each such list of additional wire centers shall be considered a Subsequent Wire Center List. AT&T will follow any limitations on the frequency with which it may issue such lists and notification procedures set forth in applicable Commission orders. 5.4.6.2 TWTC shall have thirty (30) business days to dispute the additional wire centers listed on AT&T’s CNL. Absent such dispute, effective thirty (30) business days after the date of a AT&T CNL providing a Subsequent Wire Center List, AT&T shall not be required to provide DS1 and DS3 Dedicated Transport, as applicable, in such additional wire center(s), except pursuant to the self-certification process as set forth in Section 1.9.1 of this Attachment. 5.4.6.3 For purposes of Section 5.4.6.1 above, AT&T shall make available DS1 and DS3 Dedicated Transport that were in service for TWTC in a wire center on the Subsequent Wire Center List as of the thirtieth (30th) business day after the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Embedded Base) until one hundred eighty (180) days after the thirtieth (30th) business day Version: 4Q06 Standard ICA 11/30/06 from the date of AT&T’s CNL identifying the Subsequent Wire Center List (Subsequent Transition Period). 5.4.6.4 The rates set forth in Exhibit B shall apply to the Subsequent Embedded Base during the Subsequent Transition Period. 5.4.6.5 No later than one hundred eighty (180) days from AT&T’s CNL identifying the Subsequent Wire Center List, TWTC shall submit an LSR(s) or spreadsheet(s) as applicable, identifying the Subsequent Embedded Base of circuits to be disconnected or converted to other AT&T services. 5.4.6.5.1 In the case of disconnection, the applicable disconnect charges set forth in this Agreement shall apply. 5.4.6.5.2 If TWTC chooses to convert DS1 and/or DS3 Dedicated Transport to special access circuits in existence as of the Effective Date of this Agreement, AT&T will include such DS1 and/or DS3 Dedicated Transport within TWTC’s total special access circuits, and apply any discounts to which TWTC is entitled from the transition period of 3/11/2006 to the conversion date. Conversions will be subject to the switch-as-is charge set forth in Exhibit A to this Attachment 2. 5.4.6.5.3 AT&T shall not impose disconnect or nonrecurring installation charges when transitioning the Subsequent Embedded Base of DS1 and DS3 Dedicated Transport in existence as of the Effective Date of this Agreement. 5.4.6.6 If TWTC fails to submit the LSR(s) or spreadsheet(s) for all of its Subsequent Embedded Base by one hundred eighty (180) days after the date of AT&T’s CNL identifying the Subsequent Wire Center List, AT&T will identify TWTC’s remaining Subsequent Embedded Base, if any, and will transition such circuits to the equivalent tariffed AT&T service(s), or in the case of Georgia, to the equivalent 271 service(s) set forth in Exhibit 1. In the states of Florida, Kentucky, Mississippi and South Carolina, those circuits identified and transitioned by AT&T shall be subject to the applicable disconnect charges as set forth in this Agreement and the full nonrecurring charges for installation of the equivalent tariffed AT&T service as set forth in AT&T’s tariffs. In the states of Alabama, Georgia, North Carolina and Tennessee, those circuits identified and transitioned by AT&T shall be subject to the applicable switch-as-is rates set forth in Exhibit A of Attachment

  • Existing Management and Franchise Agreements Seller has furnished to Buyer true and complete copies of the Existing Management Agreement and the Existing Franchise Agreement, which constitutes the entire agreement of the parties thereto with respect to the subject matter thereof and which have not been amended or supplemented in any respect. There are no other management agreements, franchise agreements, license agreements or similar agreements for the operation or management of the Hotel or relating to the Brand, to which Seller is a party or which are binding upon the Property, except for the Existing Management Agreement and the Existing Franchise Agreement. The Improvements comply with, and the Hotel is being operated in accordance with, all requirements of such Existing Management Agreement and the Existing Franchise Agreement and all other requirements of the Existing Manager and the Franchisor, including all “brand standard” requirements of the Existing Manager and the Franchisor. The Existing Management Agreement and the Existing Franchise Agreement are in full force and effect, and shall remain in full force and effect until the termination of the Existing Management Agreement and the Existing Franchise Agreement at Closing, as provided in Article V hereof. No default has occurred and is continuing under the Existing Management Agreement or the Existing Franchise Agreement, and no circumstances exist which, with the giving of notice, the lapse of time or both, would constitute such a default.

  • Schedule and Completion The Pre-commencement Phase Services to be performed under this Contract shall commence upon the Effective Date of the Contract and be completed within 60 days thereafter. Activities on the Site shall commence on the date specified in the Proceed Order and shall be materially complete in accordance with established Milestones, and not later than the Material Completion and Occupancy Date.

  • Project Documentation All documentation provided to the City other than Project drawings shall be furnished on a Microsoft compatible compact disc.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!