Conditioning procedure Sample Clauses

Conditioning procedure. 6.3.1. For the purpose of measuring particulates, at most 36 hours and at least 6 hours before testing, the Part Two cycle described in paragraph 6.1. of this annex shall be used for vehicle pre-conditioning. Three consecutive cycles shall be driven. The dynamometer setting shall be indicated as in paragraph 6.2.1. above. At the request of the manufacturer, vehicles fitted with indirect injection positive- ignition engines may be preconditioned with one Part One and two Part Two driving cycles. In a test facility in which there may be possible contamination of a low particulate emitting vehicle test with residue from a previous test on a high particulate emitting vehicle, it is recommended, for the purpose of sampling equipment pre-conditioning, that a 120 km/h steady state drive cycle of 20 minutes duration followed by three consecutive Part Two cycles be driven by a low particulate emitting vehicle. After this preconditioning, and before testing, vehicles shall be kept in a room in which the temperature remains relatively constant between 293 and 303 K (20 °C and 30 °C). This conditioning shall be carried out for at least six hours and continue until the engine oil temperature and coolant, if any, are within ±2 K of the temperature of the room. If the manufacturer so requests, the test shall be carried out not later than 30 hours after the vehicle has been run at its normal temperature.
Sample 1Sample 2
AutoNDA by SimpleDocs
Conditioning procedure. 6.3.1. For the purpose of measuring particulates, at most 36 hours and at least 6 hours before testing, the Part Two cycle described in paragraph 6.1. of this annex shall be used for vehicle pre-conditioning. Three consecutive cycles shall be driven. The dynamometer setting shall be indicated as in paragraph 6.2.1. of this annex. At the request of the manufacturer, vehicles fitted with indirect injection positive ignition engines may be preconditioned with one Part One and two Part Two driving cycles.
Sample 1Sample 2

Related to Conditioning procedure

  • Bumping Procedure (1) Regular employees who receive notice of layoff shall have the right to bump employees with less seniority.

  • ORDERING PROCEDURE Orders placed against this contract may be in the form of an agency issued purchase order on an as-required basis. Or an agency may also use the Arkansas State Purchasing Card (P- Card) to purchase furniture.

  • Testing Procedure A. For alcohol testing, the member shall be first given a breath test, at the collection site, followed by a confirmatory urine test only where the breath test reveals an initial positive alcohol level of .04 grams per 210 l. of breath. If the initial breath test results are below this level, testing shall be discontinued; if confirmatory urine tests results are below a level equivalent to .04 grams per 210 l. of breath, the confirmatory test shall be considered negative.

  • Working Procedure Assist in the definition and analysis of vehicle system requirements. Prepare technical specification sheets. Evaluate vendor proposals to ensure the specifications are met. Assist in the generation and checking of test reports. May conduct and witness factory acceptance tests, dynamic performance tests and may provide support for commissioning of vehicles at customers' premises. Perform other related duties as required.

  • Posting Procedure (a) Except as otherwise provided, all positions shall be posted as they arise and shall be posted using the standard posting format (see Appendix ‘C’).

  • ORDERING PROCEDURES 6.1 If the Authority or any Other Contracting Body decides to source the Services through this Services Framework then each Contracting Body shall be entitled at any time, during the Term to place an order for the Services from the Supplier by serving an Order in accordance with Framework Agreement Schedule 5 (Ordering Procedure).

  • Closing Procedure The Company or its assigns shall effect the ----------------- Repurchase by delivering or mailing to the Grantee (and/or, if applicable, his Permitted Transferees) written notice within six (6) months after the Termination Event or Bankruptcy, specifying a date within such six-month period in which the Repurchase shall be effected. Upon such notification, the Grantee and his Permitted Transferees shall promptly surrender to the Company any certificates representing the Restricted Shares being purchased, together with a duly executed stock power for the transfer of such Restricted Shares to the Company or the Company's assignee or assignees (as contemplated by Section 6, if applicable). Upon the Company's or its assignee's receipt of the certificates from the Grantee or his Permitted Transferees, the Company or its assignee or assignees shall deliver to him, her or them a check for the purchase price of the Restricted Shares being purchased, provided, however, that the Company may pay the purchase price for such shares by offsetting and canceling any indebtedness then owed by the Grantee to the Company. At such time, the Grantee and/or any holder of the Restricted Shares shall deliver to the Company the certificate or certificates representing the Restricted Shares so repurchased, duly endorsed for transfer, free and clear of any liens or encumbrances. The Repurchase obligation specified herein shall survive and remain in effect as to Restricted Shares following and notwithstanding any public offering by or merger or other transaction involving the Company and certificates representing such Restricted Shares shall bear legends to such effect.

  • HIRING PROCEDURE B5.1 The Employer agrees that whenever employees covered by this Agreement are required, the Employer shall call the Union office of the Local Union(s) having jurisdiction.

  • BIDDING PROCEDURE 1.1 Sealed bid, (formal and informal), subject to Instructions and General Conditions and any special conditions set forth herein, will be received in the office of the Purchasing Division, 440 So. 8th St., Lincoln, NE 68508, until the bid closing date and time indicated for furnishing Lancaster County, hereinafter referred to as “County”, the materials, supplies, equipment or services shown in the electronic bid request.

  • Closing Procedures Subject to satisfaction or waiver by the relevant Party of the conditions of Closing set forth herein, at the Time of Closing the Vendors shall deliver actual possession of the Purchased Shares and the requisite instruments of conveyance and upon such delivery the Purchaser shall pay or satisfy the Purchase Price in accordance with Section 2.03. The transfer of possession of the Purchased Shares shall be deemed to take effect as at the Time of Closing.

Draft better contracts in just 5 minutes Get the weekly Law Insider newsletter packed with expert videos, webinars, ebooks, and more!